{"title":"Paint care from GYEON","description":"\u003ch2\u003ePaint Care and Paint Protection for Coated Vehicles with GYEON Q²M\u003c\/h2\u003e\n\u003cblockquote\u003e\u003cp\u003e\u003cem\u003eWhat does GYEON Q²M Paint Care include? The GYEON Q²M Paint Care line offers quick detailers, spray sealants, and coating-compatible care products for regular paint care between washes – for lasting shine, active hydrophobicity refreshment, and easy daily maintenance on coated and uncoated vehicles.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eGYEON Q²M Paint Care Products\u003c\/strong\u003e are the link between major detailing and coating intervals. Coated vehicles not only need regular washing but also occasional refreshment of hydrophobicity and gloss – this is achieved with Quick Detailers, WetCoats, and Coating Boosters from the Q²M line. Uncoated vehicles benefit from quickly applied sealants and wax products that provide protection and shine between washes.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydrophobicity refreshment for coated vehicles.\u003c\/strong\u003e Quick Detailers and Spray-Sealants from the Q²M line activate and enhance the hydrophobicity of an existing coating without degrading it.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFast daily care without extensive application.\u003c\/strong\u003e Spray, wipe, done – no dwell times or special tools. Ideal for weekly or bi-weekly refreshment.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFor coated and uncoated paints.\u003c\/strong\u003e Q²M paint care products work on vehicles with and without ceramic coatings – flexible in use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e Always use Quick Detailer on clean, dry paint – never on dirty surfaces. Dirt particles on the paint can cause micro-scratches when spreading the detailer. It is best to apply directly after drying after washing – then the surface is guaranteed to be clean.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eQuick Detailer, WetCoat, and Spray Sealant: The Most Important Q²M Paint Care Products\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eThe GYEON Q²M Detailer\u003c\/strong\u003e is a quick-to-apply quick detailer that is sprayed onto clean, dry paint and wiped off. It leaves an intense shine and activates the hydrophobicity of the surface – ideal as a finish after washing or as a quick refresh between washes. The \u003ca href=\"\/en\/collections\/gyeon-q2m-maintenance-spruehversiegelungen\"\u003eQ²M Cure\u003c\/a\u003e is a spray sealant that is applied to the wet bodywork after rinsing and acts as a spray sealant – paint protection doesn't get any easier. For more ambitious maintenance requirements, there are Coating Booster products that can rebuild the thickness of a coating over time.\u003c\/p\u003e\n\u003ch3\u003eBuy GYEON Paint Care at Detailing1\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAt Detailing1,\u003c\/strong\u003e you'll find the complete GYEON Q²M Paint Care range – as a perfect complement to the \u003ca href=\"\/en\/collections\/gyeon-q2-ceramic-coatings\"\u003eQ² Ceramic Coatings\u003c\/a\u003e and the \u003ca href=\"\/en\/collections\/gyeon-q2m-maintenance-shampoo\"\u003eQ²M Shampoos\u003c\/a\u003e for a complete care workflow.\u003c\/p\u003e","products":[{"product_id":"gyeon-q2m-wetcoat-nassversiegelung","title":"Q²M WetCoat wet sealing","description":"\u003ch2\u003eSealant directly from the wash – GYEON Q²M WetCoat as a wet sealant\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n\u003cstrong\u003eWhat is a wet sealant and what makes GYEON Q²M WetCoat so special?\u003c\/strong\u003e\u003cbr\u003e\nA wet sealant is sprayed directly onto the wet paint – no drying needed, no polishing, no waiting. GYEON Q²M WetCoat contains SiO₂ particles that deposit on the paint surface during rinsing, forming a thin, hydrophobic protective film. The result: water immediately beads off, the paint shines, and the layer lasts for several weeks. For an SiO₂ sealant after washing in under two minutes, WetCoat is one of the most efficient solutions in detailing.\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003eNot every sealant requires hours of polishing and curing. GYEON Q²M WetCoat proves the opposite: spray onto the wet paint after washing, rinse briefly, done – an SiO₂ protective layer that makes water bead, enhances shine, and lasts for several weeks. No buffing, no waiting times, no elaborate application. WetCoat is the wet sealant product for anyone who wants maximum protection with minimal effort – without compromising on the result.\u003c\/p\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication directly on wet paint:\u003c\/strong\u003e WetCoat is sprayed onto the wet paint after the final rinse – the inclusion of the product in the water film allows for even distribution and optimal adhesion without manual application.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSiO₂ protection in minutes:\u003c\/strong\u003e The SiO₂ particles deposit on the paint surface during rinsing and immediately form a hydrophobic protective layer – water beading effect and increased shine are visible immediately after drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability of several weeks:\u003c\/strong\u003e Despite the quick application, WetCoat lasts 4 to 8 weeks under normal conditions – far beyond the durability of quick detailer sprays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote\u003e\n\u003cstrong\u003ePractical tip from Daniel:\u003c\/strong\u003e Use WetCoat most effectively during the final rinse: spray the product onto the wet paint, let it sit for 20–30 seconds, then rinse with low water pressure and a large amount of water – do not wipe. Even rinsing optimally distributes the SiO₂ particles over the entire surface. Then dry with a clean microfiber towel or an air blower – the result is immediately visible.\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eHow WetCoat works\u003c\/h3\u003e\n\u003cp\u003eThe chemistry behind WetCoat is elegant: SiO₂ nanoparticles are suspended in an aqueous carrier. When the product is sprayed onto the wet paint and then rinsed with plenty of water, the nanoparticles leave a thin, uniform layer on the paint surface. This layer is hydrophobic – water forms beads and runs off, instead of spreading on the surface and leaving water spots.\u003c\/p\u003e\n\u003cp\u003eThe key to success lies in rinsing: too little water during rinsing leaves streaks and spots, too much water washes away too much product. The optimal middle ground – even rinsing with a wide, low-pressure water jet – gives the SiO₂ particles the chance to distribute optimally on the surface.\u003c\/p\u003e\n\n\u003ch3\u003eWetCoat as part of the regular wash routine\u003c\/h3\u003e\n\u003cp\u003eWhat makes WetCoat special is that it integrates seamlessly into the wash routine without significantly extending it. After the regular wash – whether with \u003ca href=\"\/en\/products\/gyoen-q2m-restartwash-dekontaminations-shampoo\"\u003eGYEON Q²M RestartWash\u003c\/a\u003e or a standard shampoo – WetCoat is used during the final rinse. The total time for sealing: 1 to 2 minutes. This makes WetCoat the perfect maintenance product for vehicles already protected with a long-term coating – as a regular refresh after each wash.\u003c\/p\u003e\n\u003cp\u003eBut even for vehicles without a base coating, WetCoat provides independently usable protection: Better than no protection, significantly faster than any other sealant product, and with a visible effect that immediately convinces. For customers who don't want an elaborate coating seal but want more than nothing, WetCoat is the ideal recommendation.\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility with existing coatings\u003c\/h3\u003e\n\u003cp\u003eWetCoat is compatible with all common coatings and sealants – it acts as a top layer and refreshes the hydrophobic properties of the base sealant without damaging or changing it. On a cured SiO₂ coating, WetCoat enhances hydrophobicity and noticeably extends the effect of the base sealant.\u003c\/p\u003e\n\u003cp\u003eFor vehicles sealed with a GYEON Q² Coat or similar ceramic coating, WetCoat is an excellent addition for regular maintenance after every wash. The SiO₂ particles of WetCoat fill micro-gaps in the coating surface and give the paint a fresh, water-sheeting effect after every wash.\u003c\/p\u003e\n\n\u003ch3\u003eResult: More than expected for a wet sealant\u003c\/h3\u003e\n\u003cp\u003eWhat sets WetCoat apart from other quick sealant products is the ratio of effort to result: Less than two minutes of extra work after washing, but a result that can be measured in weeks. The shine effect is immediately visible, the hydrophobicity is noticeable in the next rain, and the surface is significantly easier to keep clean.\u003c\/p\u003e\n\u003cp\u003eFor vehicles that are washed regularly – whether weekly or every two weeks – WetCoat is the missing component for consistently well-maintained paintwork. Combined with the \u003ca href=\"\/en\/products\/gyeon-q2m-quickdetailer-quick-detailer-carnaubawachs\"\u003eGYEON Q²M QuickDetailer\u003c\/a\u003e for quick intermediate care and the \u003ca href=\"\/en\/products\/gyeon-q2m-restartwash-dekontaminations-shampoo\"\u003eGYEON Q²M RestartWash\u003c\/a\u003e for decontamination washing, WetCoat provides a complete, everyday care system for the demanding vehicle owner.\u003c\/p\u003e\n\n\u003ch3\u003eWetCoat for professionals and DIY users\u003c\/h3\u003e\n\u003cp\u003eIn professional detailing, WetCoat is used as a handover finish: After complete detailing and drying, WetCoat is applied in the final rinse phase – the customer receives a vehicle that is freshly washed and freshly sealed at the same time. For DIY users, WetCoat is the easiest way to actively invest in paint care after every wash, without specialized knowledge or complex equipment.\u003c\/p\u003e\n\u003cp\u003eThe entry into the GYEON product world begins for many with WetCoat – and immediately shows what high-quality detailing chemistry can achieve. Those who want to take the next step will find natural complements in the \u003ca href=\"\/en\/products\/gyeon-q2m-preserve-kunststoffpflege\"\u003eGYEON Q²M Preserve\u003c\/a\u003e for plastics and the GYEON Q²M TireExpress for tires, which complete the overall picture.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57034644062543,"sku":"D1-GYEON-Q2MWC1000","price":27.0,"currency_code":"EUR","in_stock":true},{"title":"500ml","offer_id":57034644095311,"sku":"D1-GYEON-Q2MWC500","price":17.0,"currency_code":"EUR","in_stock":true},{"title":"4 liters","offer_id":57034644128079,"sku":"D1-GYEON-Q2MWC4000","price":78.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-wetcoat-nassversiegelung.png?v=1771144774"},{"product_id":"gyeon-q2m-cure-redefined-keramik-spruehversiegelung","title":"Q²M Cure (REDEFINED) Ceramic Spray Sealant","description":"\u003ch2\u003eKeep Coating Fresh Long-Term – GYEON Q²M Cure\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Cure? GYEON Q²M Cure is an SiO₂-based ceramic spray sealant that regularly refreshes existing coatings and sealants, reactivates hydrophobicity, and builds an additional protective layer – for maximum durability of any coating.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eCeramic coatings are durable – but they benefit enormously from regular maintenance. \u003cstrong\u003eGYEON Q²M Cure\u003c\/strong\u003e is the recommended refresh for all GYEON Q² coatings: a highly concentrated SiO₂ spray sealant that chemically bonds with the coating surface, reactivates hydrophobicity, and simultaneously builds a new protective layer. The result: coatings last longer, bead more strongly, and look better throughout their entire lifespan.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eImmediately and permanently reactivates hydrophobicity on ceramic coatings.\u003c\/strong\u003e Over time, the hydrophobicity of ceramic coatings diminishes – due to washing, environmental influences, and UV radiation. Q²M Cure reverses this process: after application, water beads off as sharply as on a freshly applied coating. This reactivation lasts significantly longer than with simple quick detailers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBuilds an independent SiO₂ protective layer on the coating surface.\u003c\/strong\u003e Q²M Cure is not just a maintenance solution – it contains enough SiO₂ to form an independent protective layer on the existing coating. This layer protects the base coating from degradation and significantly extends its overall lifespan.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAlso ideal as a standalone sealant without a base coating.\u003c\/strong\u003e Q²M Cure is strong enough to be used on unsealed paint surfaces – as a standalone sealant with a good hydrophobic effect and several months of durability. Ideal for vehicles that are not intended to receive a permanent ceramic coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e Apply Q²M Cure to dry paint after washing. Spread evenly with a clean microfiber towel or applicator, allow to dwell briefly (approx. 60–90 seconds), then buff off with a second, clean microfiber towel. For vehicles with \u003ca href=\"\/en\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e or other Q² coatings, we recommend Q²M Cure every 2–3 months – this maintains the full protective effect throughout the coating's lifespan.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe Science Behind Q²M Cure: How SiO₂ Builds Coatings\u003c\/h3\u003e\n\u003cp\u003eQ²M Cure contains a higher SiO₂ concentration than typical quick detailers or wash-and-wax shampoos. This concentration is high enough to form a chemical bond with the coating surface and create an independent, albeit thinner, protective layer. During curing (at room temperature within 30–60 minutes), the SiO₂ cross-links with the existing coating – the surface becomes harder, more hydrophobic, and gains altered surface energy, which further reduces dirt adhesion.\u003c\/p\u003e\n\n\u003ch3\u003eApplication of Q²M Cure: As Post-Wash and Standalone\u003c\/h3\u003e\n\u003cp\u003eAs a post-wash sealant: After washing with \u003ca href=\"\/en\/products\/gyeon-q2m-bathe-autoshampoo\"\u003eQ²M Bathe\u003c\/a\u003e or \u003ca href=\"\/en\/products\/gyeon-q2m-bathe-plus-autoshampoo-keramikeffekt\"\u003eQ²M Bathe+\u003c\/a\u003e, dry the vehicle and apply Q²M Cure to the paint. Spread with an applicator, wait briefly, then buff off. As a standalone between washes: Spray a panel area on a clean vehicle, spread, wait, and buff off. Application interval: every 2–3 months on coated vehicles, every 4–8 weeks on uncoated vehicles for lasting hydrophobicity.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Cure Matte: The Variant for Matte Paints\u003c\/h3\u003e\n\u003cp\u003eGYEON offers \u003ca href=\"\/en\/products\/gyeon-q2m-cure-matte-redefined-keramik-spruehversiegelung-ma\"\u003eQ²M Cure Matte\u003c\/a\u003e, a specialized version for matte paints and films. The difference: Q²M Cure (Standard) enhances gloss – which is desired on high-gloss paint but destroys the matte effect on matte paint. Q²M Cure Matte is formulated to keep the surface matte while still providing hydrophobicity and protection. Always use Q²M Cure Standard on high-gloss paint, and Q²M Cure Matte on matte surfaces.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Cure in the Maintenance Program of Various Q² Coatings\u003c\/h3\u003e\n\u003cp\u003eQ²M Cure is the official refresh product for the entire GYEON Q² coating line. Recommended maintenance intervals depending on the coating: \u003ca href=\"\/en\/products\/gyeon-q2-cancoat-evo-ceramic-coating-keramik-spruehversiegel\"\u003eQ² CanCoat EVO\u003c\/a\u003e (entry-level coating) every 4–6 weeks, \u003ca href=\"\/en\/products\/gyeon-q2-one-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² One EVO\u003c\/a\u003e every 2–3 months, \u003ca href=\"\/en\/products\/gyeon-q2-mohs-evo-paint-coating-keramikversiegelung-lack\"\u003eQ² Mohs EVO\u003c\/a\u003e every 2–4 months. Regular Cure application demonstrably extends the coating lifespan and maintains high performance throughout the entire warranty period.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase Recommendation: Q²M Cure for Every GYEON Coating Owner\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Cure is a must-have for every vehicle with a GYEON coating. As a simple, quick, and effective refresh every 2–3 months, Q²M Cure protects the coating investment and ensures that the vehicle permanently displays the maximum lotus effect and gloss level. For daily refresh between Cure applications, we recommend \u003ca href=\"\/en\/products\/gyeon-q2m-ceramic-detailer-keramik-quick-detailer\"\u003eQ²M CeramicDetailer\u003c\/a\u003e, and for wet sealing directly after washing, \u003ca href=\"\/en\/products\/gyeon-q2m-wetcoat-nassversiegelung\"\u003eQ²M WetCoat\u003c\/a\u003e.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"500ml","offer_id":57034673815887,"sku":"D1-GYEON-Q2MCURE500","price":36.0,"currency_code":"EUR","in_stock":true},{"title":"250ml","offer_id":57034673783119,"sku":"D1-GYEON-Q2MCURE250","price":24.0,"currency_code":"EUR","in_stock":true},{"title":"100ml","offer_id":57034673848655,"sku":"D1-GYEON-Q2MCURE100","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung.png?v=1771146140"},{"product_id":"gyeon-q2m-cure-matte-redefined-keramik-spruehversiegelung-matt-oberflaechen","title":"Q²M Cure Matte (REDEFINED) Ceramic Spray Sealant for matte finishes","description":"\u003ch2\u003eProtecting Matte Paint without Destroying the Matte Effect – GYEON Q²M Cure Matte\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M Cure Matte? GYEON Q²M Cure Matte is an SiO₂ ceramic spray sealant specifically designed for matte paints and films – it offers the same protection and hydrophobicity as Q²M Cure, but without altering the characteristic matte appearance of the surface.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eMatte paint is more demanding to maintain than gloss paint – and at the same time less forgiving of incorrect care products. A standard car shampoo or quick detailer can destroy the matte effect and create unwanted glossy spots. \u003cstrong\u003eGYEON Q²M Cure Matte\u003c\/strong\u003e is the solution: a full-fledged ceramic spray sealant that can be used on matte paints and matte films without altering the characteristic matte appearance – but with full SiO₂ protection and a strong hydrophobic effect.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompletely preserves the matte effect – no unwanted shine.\u003c\/strong\u003e The formulation of Q²M Cure Matte is precisely tuned so that there is no increase in gloss level. Matte paints remain matte, matte films retain their characteristic texture – protection comes without optical change.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStrong hydrophobic effect even on matte surfaces.\u003c\/strong\u003e Water protection and dirt repellency are just as important on matte paints as on high-gloss paint – perhaps even more so, as matte surfaces are more difficult to clean when faced with limescale water or dried dirt. Q²M Cure Matte provides active hydrophobic protection without changing the gloss.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSiO₂ protective layer guards against UV fading and contamination.\u003c\/strong\u003e Like the high-gloss version, Q²M Cure Matte builds an independent SiO₂ protective layer on the surface. This protects the matte paint from UV radiation, contamination, and chemical exposure – the most common causes of premature aging of matte paints.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical Tip from Detailing1:\u003c\/strong\u003e Never use normal gloss detailers, quick detailers, or waxes on matte paint – they permanently destroy the matte effect, and removal is extremely time-consuming. Q²M Cure Matte is the safe choice for every care step on matte surfaces. For washing matte-painted vehicles, we recommend a pH-neutral shampoo without wax components, and after drying, Q²M Cure Matte as a sealant refresh.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eMatte Paint Care: Why Specialized Products Are Essential\u003c\/h3\u003e\n\u003cp\u003eMatte paints and matte films fundamentally differ from high-gloss surfaces in their structure: the matte look is created by a micro-structured, rough surface that scatters light diffusely instead of reflecting it. Normal care products with waxes, silicones, or gloss enhancers fill this microstructure and smooth the surface – which destroys the matte effect and creates glossy spots. Q²M Cure Matte applies a thin, even SiO₂ layer to this microstructure without altering it – the matte effect is fully preserved.\u003c\/p\u003e\n\n\u003ch3\u003eApplication of Q²M Cure Matte on Matte Paint and Matte Film\u003c\/h3\u003e\n\u003cp\u003eFirst, carefully wash and dry the vehicle. Apply Q²M Cure Matte evenly to the matte surface with a soft microfiber towel or applicator (not a polishing cloth!). Important: no circular movements – use straight, parallel movements for even distribution. After 60–90 seconds of dwell time, buff off with a fresh, soft microfiber towel – without pressure and without polishing. Never apply in direct sunlight or on hot surfaces. Application interval: every 4–8 weeks for consistent protection.\u003c\/p\u003e\n\n\u003ch3\u003eQ²M Cure Matte on Various Matte Surfaces\u003c\/h3\u003e\n\u003cp\u003eQ²M Cure Matte is suitable for all types of matte surfaces: factory-matted paints (e.g., BMW Individual Matt, Porsche Chalk), matted films (satin or matte wrap films), matte paint coatings (like \u003ca href=\"\/en\/products\/gyeon-q2-matte-evo-paint-coating-keramikversiegelung-matt-la\"\u003eQ² Matte EVO\u003c\/a\u003e), and satin finishes. For vehicles with partially matte and partially glossy paint areas: Use Q²M Cure Matte on matte areas, and the regular \u003ca href=\"\/en\/products\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung\"\u003eQ²M Cure\u003c\/a\u003e on high-gloss parts.\u003c\/p\u003e\n\n\u003ch3\u003eWhat to Do If Glossy Spots Appear on Matte Paint?\u003c\/h3\u003e\n\u003cp\u003eIf glossy spots have appeared on matte paint due to incorrect care products, the situation is difficult – but not hopeless. For coated matte paint (\u003ca href=\"\/en\/products\/gyeon-q2-matte-evo-paint-coating-keramikversiegelung-matt-la\"\u003eQ² Matte EVO\u003c\/a\u003e): Evenly remove the coating layer with a suitable coating remover (\u003ca href=\"\/en\/products\/gyeon-q2m-total-remover-wachs-coating-entferner\"\u003eQ²M TotalRemover\u003c\/a\u003e) and re-coat. For uncoated matte paint: A detailer should assess the surface – in some cases, careful cleaning can remove the glossy spots, in other cases, repainting is necessary. Q²M Cure Matte reliably prevents such problems.\u003c\/p\u003e\n\n\u003ch3\u003ePurchase Recommendation: Q²M Cure Matte for Matte Paint Vehicles\u003c\/h3\u003e\n\u003cp\u003eGYEON Q²M Cure Matte is a must-have product for every owner of a vehicle with matte paint or matte film. The consequences of incorrect care (destroyed matte effect, glossy spots) are expensive and often irreparable – Q²M Cure Matte eliminates this risk. As a complete matte paint care system, we recommend: pH-neutral shampoo without wax components for washing, Q²M Cure Matte for sealant refreshing, and \u003ca href=\"\/en\/products\/gyeon-q2-matte-evo-paint-coating-keramikversiegelung-matt-la\"\u003eQ² Matte EVO\u003c\/a\u003e as a permanent ceramic coating for matte paints.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"500ml","offer_id":57034703307087,"sku":"D1-GYEON-Q2MCUREMATTE500","price":37.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-cure-matte-redefined-keramik-spruehversiegelung-matt-oberflaechen.png?v=1771146769"},{"product_id":"gyeon-q2m-ceramic-detailer-keramik-quick-detailer","title":"Q²M CeramicDetailer Ceramic Quick Detailer","description":"\u003ch2 id=\"speakable-headline\"\u003eSiO₂ Care Between Washes with GYEON Q²M CeramicDetailer\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M CeramicDetailer? An SiO₂-infused quick detailer that refreshes coatings and sealants between washes — hydrophobicity, gloss, and dirt repellency in one step. Not a coating replacement, not a long-term sealant, and not suitable for heavily soiled surfaces.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eGYEON Q²M CeramicDetailer\u003c\/strong\u003e is an SiO₂-based quick detailer from GYEON, specifically developed for ceramic-coated vehicles. The included silicon dioxide particles react with the existing coating and instantly enhance its water-beading performance — simultaneously building up a temporary protective layer that makes dust and dirt adhere less. Unlike classic quick detailers that only polish optically, CeramicDetailer provides genuine, albeit temporary, protective layer build-up.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-ceramicdetailer-scene-hero.jpg?v=1776033222\" alt=\"GYEON Q²M CeramicDetailer on concrete forecourt with BMW M3 at Golden Hour\" width=\"940\" loading=\"lazy\"\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHydrophobicity reactivation in 2 minutes.\u003c\/strong\u003e After spraying and buffing, water immediately beads sharply again — even if the coating has been deteriorating for weeks. The effect lasts up to 6 weeks, depending on weather conditions and parking location. For garaged vehicles, often significantly longer.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e40–50 ml per vehicle, 500 ml is enough for 10–12 applications.\u003c\/strong\u003e With its efficiency, CeramicDetailer is one of the most economical SiO₂ detailers on the market. One spray per panel is sufficient — applying more will not create a better effect, but only more buffing effort.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCan be used wet and dry, also as a drying aid.\u003c\/strong\u003e Sprayed onto wet paint after washing, CeramicDetailer accelerates drying while leaving a protective layer. On dry paint, it removes dust and fingerprints without the risk of scratches — provided the surface is not heavily soiled.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003ePractical tip from Detailing1:\u003c\/strong\u003e The most common mistake with CeramicDetailer: spraying too much product at once. A single spray per body panel is sufficient. Those who apply three or four sprays will then struggle with streaks — not because the product is bad, but because excess SiO₂ smears instead of being absorbed during buffing. At temperatures below 5 °C, we recommend applying the product in the garage at room temperature, as cold temperatures make distribution difficult and leave streaks.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eProperly using CeramicDetailer on wet and dry paint\u003c\/h3\u003e\n\u003cp\u003eThe two-towel method is mandatory for \u003cstrong\u003eGYEON Q²M CeramicDetailer\u003c\/strong\u003e — one soft microfiber towel for spreading, a second for buffing. Those who work with only one towel will smear dissolved dirt and SiO₂ residues across the paint, creating exactly the streaks that are then wrongly attributed to the product.\u003c\/p\u003e\n\n\u003cp\u003eOn dry paint: One spray per panel directly onto the paint or onto the microfiber towel, spread evenly, then buff with the dry side of the second towel. Do not work in direct sunlight — otherwise, the product will dry within seconds and will then be difficult to remove without residue.\u003c\/p\u003e\n\n\u003cp\u003eIn the shade or garage, application is much more relaxed. With a light layer of dust after 3–5 days of standing, CeramicDetailer is sufficient as the sole care between washes — a full wash is then not necessary. For best results, use a short-pile microfiber towel with 300–400 GSM — long-pile towels absorb too much product and reduce its effect on the paint.\u003c\/p\u003e\n\n\u003cp\u003eOn wet paint immediately after washing: 2–3 sprays per panel onto the wet surface, then wipe off with a \u003ca href=\"\/en\/collections\/trockentuecher\"\u003edrying towel\u003c\/a\u003e in straight passes. CeramicDetailer acts as a drying aid here — the water is absorbed by the towel rather than smeared, and the SiO₂ protective layer builds up in the same step. This method saves a good 10 minutes during the weekend wash compared to separate drying and subsequent sealing.\u003c\/p\u003e\n\n\u003cp\u003eImportant for both methods: Shake the product briefly before use. The SiO₂ particles settle at the bottom of the bottle during prolonged storage — those who spray without shaking will only distribute carrier agents without active ingredients in the first spray. This also explains why some users see less gloss on the first panel than on the last.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-ceramicdetailer-scene-anwendung.jpg?v=1776033227\" alt=\"GYEON Q²M CeramicDetailer application on wet paint\" width=\"940\" loading=\"lazy\"\u003e\n\n\u003ch3\u003e6 weeks durability and where the limits lie\u003c\/h3\u003e\n\u003cp\u003eThe CeramicDetailer lasts up to 6 weeks under optimal conditions — garaged vehicle, no continuous wetness, no winter operation. In everyday life with outdoor parking, rain, and occasional car wash visits, 3–4 weeks are more realistic. This is not a defect, but the expected result of a quick detailer — products in this category are designed for quick refreshment, not durability.\u003c\/p\u003e\n\n\u003cp\u003eThe immediate hydrophobicity reactivation is its true strength: within seconds of buffing, water beads visibly and quickly, dirt adheres less, and dust adhesion is noticeably reduced by the antistatic effect. This is particularly advantageous on dark paints, as dust shows up more quickly there. CeramicDetailer also works on glass and rims — however, the durability there is shorter than on paint, typically 2–3 weeks instead of 6.\u003c\/p\u003e\n\n\u003cp\u003eWhere CeramicDetailer is not the right product: On uncoated paint, it shows significantly less effect because the SiO₂ particles do not find an existing coating to chemically bond with — the effect dissipates there after a few days. It is not designed for heavy contamination like insect residue, tar, or bird droppings: here, first wash with car shampoo, then apply the detailer. It should not be used on matte or satin paints and films, as SiO₂ creates unwanted gloss there.\u003c\/p\u003e\n\n\u003cp\u003eIf you need genuine protection with 3+ months of durability, reach for the \u003ca href=\"\/en\/products\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung\"\u003espray sealant Q²M Cure\u003c\/a\u003e. If a quick refresh for the next few weeks is sufficient, CeramicDetailer is the more time-saving choice — 2 minutes instead of 15.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-ceramicdetailer-scene-ergebnis.jpg?v=1776033231\" alt=\"GYEON Q²M CeramicDetailer water beading on black paint\" width=\"940\" loading=\"lazy\"\u003e\n\n\u003ch3\u003eCeramicDetailer or Cure for your coating\u003c\/h3\u003e\n\u003cp\u003eBoth GYEON products refresh coatings, but with fundamentally different effort and results. Understanding the difference saves money and time.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"\/en\/products\/gyeon-q2m-cure-redefined-keramik-spruehversiegelung\"\u003eQ²M Cure\u003c\/a\u003e is a full-fledged SiO₂ spray sealant with a higher concentration of active ingredients. It builds a measurably thicker protective layer that lasts 3–6 months and substantially regenerates the coating. The disadvantage: Cure requires clean, ideally degreased paint and more care during application — on slightly soiled paint on a Thursday evening, Cure is overkill. CeramicDetailer, on the other hand, is applied in 2 minutes, forgives more application errors, and is sufficient for the weeks between Cure refreshes.\u003c\/p\u003e\n\n\u003cp\u003eThe ideal routine for coated vehicles looks like this: Apply Cure every 2–3 months as a base protection after a thorough wash, CeramicDetailer weekly or as needed for quick interim care. This keeps the coating in top condition permanently, without you having to invest 30 minutes every week. The weekly CeramicDetailer application costs you 2 minutes per vehicle.\u003c\/p\u003e\n\n\u003cp\u003eThose who do not have a coating on their paint and are looking for real long-term protection are wrongly advised to use CeramicDetailer alone. Here, it is worth starting with a genuine \u003ca href=\"\/en\/collections\/keramikversiegelung\"\u003eceramic coating like Q² Mohs EVO or Q² Pure EVO\u003c\/a\u003e, followed by CeramicDetailer as a maintenance product. The combination of coating and regular detailer is what GYEON designed as a complete care system. In practice, this system works better than any individual solution because each component compensates for the weaknesses of the others: the coating provides the basic hardness, the CeramicDetailer provides ongoing freshness.\u003c\/p\u003e\n\n\u003cp\u003eFor getting started, we recommend the 500ml bottle — it is enough for 10–12 full vehicle applications and will show you within 2–3 weeks if CeramicDetailer fits your care routine. The 1-liter bottle is worthwhile if you use the detailer regularly weekly or care for multiple vehicles.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-ceramicdetailer-scene-lineup.jpg?v=1776033238\" alt=\"GYEON Q²M CeramicDetailer 500 ml and 1000 ml lineup\" width=\"940\" loading=\"lazy\"\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57034743644495,"sku":"D1-GYEON-Q2MCD1000","price":27.0,"currency_code":"EUR","in_stock":true},{"title":"500ml","offer_id":57034743677263,"sku":"D1-GYEON-Q2MCD500","price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-ceramic-detailer-keramik-quick-detailer.png?v=1771147281"},{"product_id":"gyeon-q2m-quickdetailer-quick-detailer-carnaubawachs","title":"Q²M QuickDetailer Quick Detailer with Carnauba Wax","description":"\u003ch2 id=\"speakable-headline\"\u003eGYEON Q²M QuickDetailer restores warm carnauba shine without water or washing\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is GYEON Q²M QuickDetailer? A carnauba-based quick detailer for daily interim care that gently removes dust film, fingerprints, and light water spots from paint, glass, and plastic, leaving behind a warm, natural carnauba shine. Can be used on dry paint, ceramic coatings, waxes, and sealants, as well as a drying aid on wet vehicles. Not suitable for heavy contamination, brake dust, dried bird droppings, or temperatures below 10 °C — these require a wash.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eGYEON Q²M QuickDetailer\u003c\/strong\u003e is a carnauba-based quick detailer from GYEON that, without water consumption, gently lifts dust film, fingerprints, and light water spots from painted surfaces while building up a thin carnauba wax film. The shine is different from pure silicone-polymer detailers: warmer, more natural, and without the slightly plastic-like finish that cheaper alternatives leave behind. The product is available in three sizes – 500 ml, 1 liter, and 4 liters.\u003c\/p\u003e\n\n\u003cp\u003eIts working principle is physically simple: carnauba wax forms a hard, thin film over the existing paint or sealant layer, creating a hydrophobic layer. Dust particles and fingerprint grease adhere less strongly to this layer and can be lifted off with a microfiber cloth without mechanical pressure. A clean cloth is always a prerequisite – a used cloth that smears will spread particles over the paint instead of lifting them, leaving micro-scratches that are particularly visible on dark paints in side lighting.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-quickdetailer-quick-detailer-carnaubawachs_hero.png\" alt=\"GYEON Q²M QuickDetailer bottle on glossy bonnet with carnauba shine\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWarm carnauba shine in under 60 seconds per panel.\u003c\/strong\u003e The carnauba content creates a visibly different shine than silicone-polymer sprays: deeper, warmer, and without the artificially high-gloss finish. On dark solid colors – black, deep blue, dark red – the difference is visible to the naked eye after buffing, especially in direct sunlight.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompatible with all protection systems.\u003c\/strong\u003e Q²M QuickDetailer works on bare paint, on ceramic coatings like GYEON Q² Mohs EVO, and on carnauba bases – it enhances existing protection without dissolving or compromising it. No risk with mixed fleets using different sealing systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMore economical than the bottle size suggests.\u003c\/strong\u003e The manufacturer specifies 40–50 ml per vehicle. With correct application – 1–2 sprays onto the cloth, not directly onto the paint – the 500 ml bottle is sufficient for 10 to 12 full vehicle treatments. This equates to €1.25 per application; those who opt for the 4-liter container will pay around €0.64 per treatment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1 Pro Tip:\u003c\/strong\u003e The most common mistake with Q²M QuickDetailer is to spray the product directly onto the paint and then distribute and buff it with a single cloth. The result is streaks – immediately visible on dark paints in side lighting. Better: 1–2 sprays onto a clean microfiber cloth (at least 320 GSM), distribute evenly over the panel, then buff with the clean reverse side or a second cloth. Two clean cloths per application are not a luxury, but the difference between streaks and carnauba shine.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSpray onto the cloth, not the paint. Done in 60 seconds.\u003c\/h3\u003e\n\u003cp\u003eQ²M QuickDetailer is sprayed onto the cloth, not the paint – 1 to 2 sprays per panel are enough, and the product spreads evenly without drying out.\u003c\/p\u003e\n\n\u003cp\u003e1 to 2 sprays on the cloth are enough for a normal segment: bonnet, roof, or side panel. The cloth is guided over the surface with light, even pressure, then turned over, and the surface is buffed with the clean side. This takes under 60 seconds per segment. A compact vehicle is ready in 8 to 10 minutes – without a water connection, without subsequent drying time.\u003c\/p\u003e\n\n\u003cp\u003eAs a drying aid, Q²M QuickDetailer can also be used on a wet car: 2–3 sprays onto the drying towel, and the towel glides more smoothly over the paint, leaving fewer water spots while simultaneously building up the carnauba layer. The water content on the surface slightly dilutes the product – consumption drops to about 20–25 ml per vehicle, and the gloss intensity is slightly lower than on completely dry paint.\u003c\/p\u003e\n\n\u003cp\u003eImportant: Do not work on heavily heated surfaces or in direct sunlight. Carnauba wax dries on hot paint before it can spread evenly, then leaves dried streaks that can only be buffed out with more cloth and more pressure. In the early morning or in the shade, the QuickDetailer works reliably. The surface should not feel warmer than 25 °C in direct sunlight – if it is significantly warmer, shade it for 10 minutes and then spray.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-quickdetailer-quick-detailer-carnaubawachs_anwendung_369ec48e-f6a0-43fb-b06f-d577c44f4fad.png?v=1776523002\" alt=\"GYEON Q²M QuickDetailer application with black nitrile gloves on microfiber cloth Detailing1 paint care\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eDust film and fingerprints, yes. Brake dust and bird droppings, no.\u003c\/h3\u003e\n\u003cp\u003eQ²M QuickDetailer is designed for light, dry contamination – dust film after a garage drive, fresh fingerprints, light streaks after the last rain. These impurities can be safely lifted with the lubricating formula without risk of scratches.\u003c\/p\u003e\n\n\u003cp\u003eFor brake dust, dried bird droppings, construction dirt, or salt deposits, the Q²M QuickDetailer does not work – and this is not a product weakness, but physics. These contaminants require either water for pre-wetting or specific chemical agents that the product does not contain. Trying to wipe off dried bird droppings with a quick detailer risks scratches – the droppings will be pushed over the paint with the cloth instead of being softened and lifted. In these cases: pre-soak first or \u003ca href=\"\/en\/collections\/lackpflege\"\u003ewash\u003c\/a\u003e, then use the QuickDetailer as a finish.\u003c\/p\u003e\n\n\u003cp\u003eBelow 10 °C, carnauba wax loses its binding ability. The film can be applied and looks good shortly after application, but no longer has measurable adhesion and will largely be rinsed off with the next rain. In winter, GYEON Q²M WetCoat, which is polymer-based and cross-links more efficiently at lower temperatures, is the better choice for regular care.\u003c\/p\u003e\n\n\u003cp\u003eOn ceramic sealants, Q²M QuickDetailer acts as a top layer and is explicitly approved for these surfaces. It is not a substitute for a dedicated coating refresher product – but it maintains gloss and hydrophobicity between detailing intervals at a visibly higher level than without interim care. Combining both – QuickDetailer weekly, refresher product every six to eight weeks – measurably extends the coating's lifespan.\u003c\/p\u003e\n\n\u003cp\u003eSurfaces with a regular carnauba top layer bind less fine dust into the sealant structure and can be completely cleaned with significantly less shampoo during the next wash. The QuickDetailer thus not only reduces maintenance effort between washes but also makes the washes themselves more efficient.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-quickdetailer-quick-detailer-carnaubawachs_ergebnis.png\" alt=\"Paint surface with water beads after GYEON Q²M QuickDetailer carnauba shine Detailing1\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003eFor anyone who wants to keep their car fresh between washes.\u003c\/h3\u003e\n\u003cp\u003eQ²M QuickDetailer closes the gap between two washes: after washing, the car gleams, two days later there's a dust film. For those who address this with a complete wash, water, time, and shampoo are consumed for contamination that wouldn't require water.\u003c\/p\u003e\n\n\u003cp\u003eFor vehicle owners with a weekly or bi-weekly wash routine, the Q²M QuickDetailer does not replace washing – but it measurably reduces how often a wash is truly necessary and how much stress the paint surface undergoes. Dust film and fingerprints are removed in 8 to 10 minutes, the paint looks freshly washed, and the existing sealant is refreshed instead of stressed. For those who frequently showcase their vehicle at events or keep it as an investment, this is the most practical maintenance tool between major detailing intervals.\u003c\/p\u003e\n\n\u003cp\u003eFor commercial detailers, the 4-liter container is the economical size: 100 full vehicle treatments for €64, which is €0.64 per final finish. Those who prepare customer giveaways can decant from the 1-liter bottle into 100-ml spray bottles – 10 customer sets from one liter, each sufficient for 2 to 3 applications. The bottle has no minimum active ingredient degradation – as long as stored sealed, the carnauba formula remains stable for up to 36 months.\u003c\/p\u003e\n\n\u003cp\u003eWhat the Q²M QuickDetailer does not do: build up long-term protection, remove deep dirt, or restore oxidized surfaces. If you want to completely detail a vehicle after winter, start with decontamination and \u003ca href=\"\/en\/products\/gyeon-q2m-iron-redefined-flugrostentferner\"\u003eiron remover\u003c\/a\u003e – the QuickDetailer comes afterwards as a finish, not as a base. And if you specifically want to care for plastic add-on parts, you need the \u003ca href=\"\/en\/products\/gyeon-q2m-preserve-kunststoffpflege\"\u003eGYEON Q²M Preserve\u003c\/a\u003e, which is designed for plastic and permanently restores blackness.\u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-quickdetailer-quick-detailer-carnaubawachs_lineup.png\" alt=\"GYEON Q²M QuickDetailer 500ml 1 liter 4 liter lineup all containers Detailing1\" loading=\"lazy\" style=\"width:100%;height:auto;border-radius:4px;\"\u003e\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"1000 ml \/ 1 liter","offer_id":57034784473423,"sku":"D1-GYEON-Q2MQD1000","price":26.0,"currency_code":"EUR","in_stock":true},{"title":"500ml","offer_id":57034784506191,"sku":"D1-GYEON-Q2MQD500","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"4 liters","offer_id":57034784538959,"sku":"D1-GYEON-Q2MQD4000","price":64.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-quickdetailer-quick-detailer-carnaubawachs.png?v=1771148045"},{"product_id":"gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie","title":"Q²M \"PPF\" Maintain (REDEFINED) Spray Sealant for Paint Protection Film","description":"\u003ch2 id=\"speakable-headline\"\u003eSiO² Hydrophobicity for Paint Protection Film with GYEON Q²M PPF Maintain\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is Q²M PPF Maintain? An SiO²-based spray sealant for PU and TPU paint protection films that refreshes hydrophobicity and self-cleaning to over 80° contact angle after every wash — on both matte and glossy films. Not suitable for uncoated clear coat or already detached film edges.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_hero.jpg\" alt=\"GYEON Q²M PPF Maintain spray sealant next to a foiled vehicle in the workshop\" loading=\"lazy\"\u003e\n\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eGYEON Q²M PPF Maintain\u003c\/strong\u003e is a spray sealant from GYEON's REDEFINED series, formulated for polyurethane and thermoplastic polyurethane films. The SiO² content of over 5 percent builds a silicate layer on the film, maintaining the contact angle above 80° and preventing organic contaminants from adhering. The pH range between 4 and 9 makes the sealant compatible with common coatings — unlike quick detailers for paint, which contain solvents or silicone oils and can attack plasticizers in the film material.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eContact angle over 80° after each application.\u003c\/strong\u003e The SiO² content builds a thin silicate layer on the film after two to three sprays. Water beads like on fresh PPF, dust and road dirt adhere less, and self-cleaning returns. The effect is visually immediately recognizable by the droplet shape upon the next contact with water.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLayering effect with regular application.\u003c\/strong\u003e A single refresh lasts over six weeks. Those who spray after every wash will cumulatively build layers after two to three applications — the durability per application increases, and consumption decreases. This is the difference between maintenance and a one-off application.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e30 ml per vehicle — 500 ml is sufficient for approximately 16 applications.\u003c\/strong\u003e Fine mist, apply thinly, work in with two cloths. No curing time, no setting, no aromatic solvents. A bottle will last you approximately six to twelve months through your regular washing routine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's Pro Tip:\u003c\/strong\u003e Don't spray the sealant directly onto the panel, but onto the microfiber towel. The product distributes more evenly, nothing lands on rubber, plastic, or window seals, and you'll need less per application. Wash towels separately after use at 40 °C without fabric softener — silicate residues will clog the fibers and reduce absorbency. After about 20 washes, a towel is removed from rotation. For dark films, a fresh finisher towel is particularly worthwhile, as streaks are most likely to show there in glancing light.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eFine Mist. Two Towels. No Overspray.\u003c\/h3\u003e\n\n\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_anwendung.jpg\" alt=\"GYEON Q²M PPF Maintain sprayed onto microfiber towel before application to paint protection film\" loading=\"lazy\"\u003e\n\n\n\u003cp\u003eTwo to three sprays per panel are sufficient — spray onto the towel, spread the product on the film, and buff with a second clean microfiber towel (350–400 GSM). No curing time is necessary; the sealant bonds immediately.\u003c\/p\u003e\n\n\u003cp\u003eThe sealant can be applied wet or dry. Wet application means: spray directly onto the damp film after rinsing, pick up with a drying towel — water is displaced, streaks disappear, and hydrophobicity is immediately active. This method saves a step and is suitable for quick maintenance in between. Dry application means: completely dry the vehicle, then spray and work in with two towel passes. The dry method provides more control on large surfaces and is the cleaner choice for dark films.\u003c\/p\u003e\n\n\u003cp\u003eTemperature determines the result. Keep the film below 30 °C, do not apply in direct sunlight — otherwise the carrier flashes too quickly and leaves speckles that can only be removed by reapplication after cleaning. If you can't hold your hand on the film for seconds, it's too hot. Move the vehicle to the shade, wait 15 minutes, then work.\u003c\/p\u003e\n\n\u003cp\u003eCan be used on both glossy and matte PPF — the matte character is preserved, no additional gloss layer is created. On textured films like carbon, spray thinner and buff more thoroughly to prevent residues from remaining in the grooves. Avoid rubber, plastic, and window seals — remove overspray there dry, the SiO² layer on porous rubber seals leaves edges that can only be removed mechanically.\u003c\/p\u003e\n\n\u003ch3\u003eIt maintains film. Not clear coat.\u003c\/h3\u003e\n\u003cp\u003eThe sealant is chemically tuned for polyurethane, not clear coat. On uncoated paint surfaces, the PPF formula offers no added value because the SiO² layer does not bond as well to paint as it does to the film surface.\u003c\/p\u003e\n\n\u003cp\u003eFor clear coat, \u003ca href=\"\/en\/products\/gyeon-q2m-cure-spruehversiegelung\"\u003eQ²M Cure\u003c\/a\u003e is the appropriate choice — the SiO² content and carrier substances are formulated to reliably adhere to the harder paint surface. On hybrid vehicles with partially foiled sections (front in PPF, rear in original paint), it is recommended either to use two bottles, two towels, and clean separation — or, more commonly in practice: Q²M Cure consistently on all surfaces, because it also works tolerably on PPF. The reverse is not true.\u003c\/p\u003e\n\n\u003cp\u003eThe spray sealant is compatible with ceramic coatings already applied to the film. If a coating such as \u003ca href=\"\/en\/products\/gyeon-q2-ppf-evo-ceramic-coating-keramikversiegelung-lacksch\"\u003eQ² PPF EVO\u003c\/a\u003e or Q² MOHS is on the PPF, the Maintain layer integrates into the same matrix and acts as a topcoat. The underlying coating is mechanically protected, and the surface tension is further increased. The difference is noticeable during drying — a freshly refreshed surface dries faster and without water marks.\u003c\/p\u003e\n\n\u003cp\u003eWhere Maintain is not the right product: For films with visible bubbles, detached edges, or delamination. No sealant will help there — the film belongs in the hands of the PPF installer. Even slight swirls in the film surface are not removed by the sealant, but become more visible due to the glossier surface. Before maintenance, \u003ca href=\"\/en\/products\/gyeon-q2m-ppf-renew-politur-lackschutzfolie\"\u003eQ²M PPF Renew\u003c\/a\u003e should be used as a polishing step beforehand.\u003c\/p\u003e\n\n\u003ch3\u003eYour standard after every PPF wash\u003c\/h3\u003e\n\n\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_ergebnis.jpg\" alt=\"Water beads in clear drops from paint protection film after GYEON Q²M PPF Maintain refresh\" loading=\"lazy\"\u003e\n\n\n\u003cp\u003eThe sealant is the right choice for anyone who regularly drives with PPF and doesn't want to see hydrophobicity collapse after twelve months. The rhythm is simple: refresh after every wash — and the car will permanently remain in like-new condition.\u003c\/p\u003e\n\n\u003cp\u003eAs a complete solution, it integrates into a three-step system: \u003ca href=\"\/en\/products\/gyeon-q2m-ppf-wash-autoshampoo-lackschutzfolie\"\u003eQ²M PPF Wash\u003c\/a\u003e as a pH-neutral shampoo without gloss enhancers, which does not attack the Maintain layer. Q² PPF EVO as a two-year coating as a base. And Maintain as a regular refresh after every wash. These three steps significantly extend the lifespan of a film beyond the manufacturer's warranty. Those who have invested four to five figures in PPF thus protect the investment, not the paint underneath.\u003c\/p\u003e\n\n\u003cp\u003eThe sealant is less suitable for vehicles that are only moved every six months. In such cases, a pure coating solution like Q² PPF EVO without regular refreshing is sufficient, because the wash \u0026 maintain routine would not yield enough applications per year to take advantage of the layering benefit. For commercial detailers with PPF fleets in daily operation, a 4-liter refill option is also available upon request — consumption remains identical, and the price per milliliter significantly decreases.\u003c\/p\u003e\n\n\u003cp\u003eEconomically calculated: A 500 ml bottle is sufficient for approximately 16 applications at 30 ml per vehicle. Those who refresh weekly will get about four months out of a bottle. Those who work bi-weekly will make it last half to three-quarters of a year. This makes Maintain the most affordable component of overall PPF protection — the film itself costs four to five figures, the coating three figures, and the refresh per application is under two euros.\u003c\/p\u003e\n\n\n  \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_closeup.jpg\" alt=\"Close-up of GYEON Q²M PPF Maintain spray bottle on microfiber towels in the Detailing1 workshop\" loading=\"lazy\"\u003e","brand":"GYEON","offers":[{"title":"500ml","offer_id":57046071279951,"sku":"D1-GYEON-Q2MPPFMAIN500","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-ppf-maintain-redefined-spruehversiegelung-lackschutzfolie_500ml.png?v=1771255602"}],"url":"https:\/\/detailing1.be\/en\/collections\/gyeon-q2m-maintenance-lackpflege.oembed","provider":"Detailing1","version":"1.0","type":"link"}