{"title":"Kleine Pads – Finishing-Pads aus Schaumstoff","description":"\u003ch2 id=\"speakable-headline\"\u003eKleine Pads – Finishing-Pads aus Schaumstoff\u003c\/h2\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eKleine Pads – Finishing-Pads aus Schaumstoff\u003c\/strong\u003e: Pads übertragen Politur auf die passende Kontaktfläche. Die kleinere Kontaktfläche erleichtert die Führung an geeigneten schmalen Bauteilen; Pad und Stützteller werden getrennt auf Passung geprüft.\u003c\/p\u003e\n\u003cp\u003ePad-Durchmesser und Stütztellermaß werden getrennt geprüft, damit die Arbeitsfläche zur Maschine und zum Bauteil passt.\u003c\/p\u003e","products":[{"product_id":"koch-chemie-micro-cut-pad-violett-polierpad-schleifschwamm","title":"Micro-Cut Pad \"Violet\" Polishing Pad Foam Cutting Pad","description":"\u003cp\u003eA high-grade specialist foam pad for taking out light scratches, holograms and polishing marks with Micro Cut M3.02 and Micro Cut \u0026amp; Finish P3.01. The low 23mm profile means lower torsional forces, very tidy handling and rock-solid stability. The special foam density holds its compression hardness through a long polishing pass. The optimised reticulation (open-cell structure) and cell count feed into a lasting high-gloss finish and very good hygiene. The bevelled edge gives the pad more flex so it follows contours better. The coloured backing, matched to the polish, keeps the process foolproof. Compression hardness: 10. Cut: 5.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"Ø150mm","offer_id":48867600171343,"sku":"D1-KCX-999585","price":14.99,"currency_code":"EUR","in_stock":false},{"title":"Ø126mm","offer_id":48867600204111,"sku":"D1-KCX-999584","price":13.99,"currency_code":"EUR","in_stock":false},{"title":"Ø76mm","offer_id":48867600236879,"sku":"D1-KCX-999583","price":8.99,"currency_code":"EUR","in_stock":false},{"title":"Ø45mm","offer_id":48867600269647,"sku":"D1-KCX-999612","price":34.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/MicroCutPads__1715068495.png?v=1715115471"},{"product_id":"rupes-d-a-fine-polierpad-schleifschwamm","title":"\"D-A\" Fine (9.DA Series M) Polishing Foam Pad","description":"\u003ch2\u003eRupes \"D-A\" Fine Polishing Foam Pad\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRupes \"D-A\" Fine polishing foam pad\u003c\/strong\u003e is the most versatile pad in the BigFoot range from RUPES. It pulls defects out effectively and leaves a high-gloss finish on most paints. Run it with RUPES DA-FINE polish for moderate to fine defect removal, paint refinement, or as the last step after a heavier compound.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility\u003c\/strong\u003e: works with most paint types and polishers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective defect removal\u003c\/strong\u003e: pulls out moderate to fine scratches and leaves a deep gloss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWider use\u003c\/strong\u003e: now runs on gear-driven orbital machines too.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eA versatile pad for any job\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eRupes \"D-A\" Fine polishing pad\u003c\/strong\u003e has a name for being versatile. It is not just for DA-FINE polish — it runs on a range of machines, from the BigFoot series to gear-driven orbitals. That makes it a pad no detailer wants to be without.\u003c\/p\u003e\n\u003ch3\u003eEffective defect removal and a high-gloss finish\u003c\/h3\u003e\n\u003cp\u003eThanks to the special foam of the \u003cstrong\u003eRupes \"D-A\" Fine polishing pad\u003c\/strong\u003e, moderate to fine defects come out efficiently. What is left is a smooth, high-gloss surface that puts the shine back into any car. Perfect as the last polishing step after a heavier compound.\u003c\/p\u003e\n\u003ch3\u003eA wider range of uses\u003c\/h3\u003e\n\u003cp\u003eThe pad's new, brighter yellow does not just bring fresh air into the workshop, it also widens what the pad can do. You can now run it on dual action machines as well as gear-driven orbitals. That flexibility makes it an all-rounder for any kind of polishing work.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Rupes","offers":[{"title":"Ø 180mm","offer_id":49230333477199,"sku":"D1-RUP-DA180M","price":16.49,"currency_code":"EUR","in_stock":false},{"title":"Ø150mm","offer_id":49230333509967,"sku":"D1-RUP-9DA150M","price":15.49,"currency_code":"EUR","in_stock":false},{"title":"Ø 100mm","offer_id":49230333542735,"sku":"D1-RUP-9DA100M","price":9.99,"currency_code":"EUR","in_stock":false},{"title":"Ø 70 mm","offer_id":49230336590159,"sku":"D1-RUP-9DA70M\/4","price":35.99,"currency_code":"EUR","in_stock":false},{"title":"Ø 40 mm","offer_id":49230336622927,"sku":"D1-RUP-9DA40M\/6","price":33.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/D-A-fine-polishing-pasd-for-dual-action-flow-pack.jpg?v=1719913191"},{"product_id":"rupes-d-a-intermediate-polierpad-schleifschwamm","title":"\"D-A\" Intermediate (9.DA Series B) Polishing Foam Pad","description":"\u003ch2\u003eRupes \"D-A\" Intermediate – Polishing Foam Pad\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eRupes \"D-A\" Intermediate polishing foam pad\u003c\/strong\u003e fills the gap in the RUPES D-A line and sits right between the yellow D-A FINE pad and the blue D-A COARSE pad. It's the most versatile pad in the BigFoot range and you can run it with several RUPES polishes: D-A COARSE, D-A FINE, UNO ADVANCED and UNO PROTECT. Paired with the blue RUPES D-A COARSE polish, this pad has the cut to pull heavy defects out of a wide range of painted and hard surfaces. With the yellow RUPES D-A FINE polish it takes out moderate to fine defects and leaves a high-gloss finish. The advanced foam formula really comes into its own when you combine it with UNO PROTECT or UNO ADVANCED for the final polish and for laying down a durable layer of protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility\u003c\/strong\u003e: works with several RUPES polishes, so you have an answer for every polishing job.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency\u003c\/strong\u003e: removes heavy as well as moderate defects and leaves a high-gloss finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced formula\u003c\/strong\u003e: foam that shines on the final polish and the protection step.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eCutting power for heavy defects\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eRupes \"D-A\" Intermediate polishing pad\u003c\/strong\u003e is your go-to for pulling heavy defects out of all kinds of surfaces. Team it with the blue RUPES D-A COARSE polish and this pad shows what it's really made of. Deeper scratches and oxidation come out without a fight, so the paint on your car looks like new again.\u003c\/p\u003e\n\u003ch3\u003eHigh-gloss finish on moderate defects\u003c\/h3\u003e\n\u003cp\u003eWhen you want to take out moderate to fine defects and land a high-gloss finish in the same pass, the Rupes \"D-A\" Intermediate polishing pad with the yellow RUPES D-A FINE polish is the pick. It leaves a flawless surface and sets your car up perfectly for the protective layer.\u003c\/p\u003e\n\u003ch3\u003eFinal polish and protection\u003c\/h3\u003e\n\u003cp\u003eThe real strength of the \u003cstrong\u003eRupes \"D-A\" Intermediate polishing pad\u003c\/strong\u003e shows up with UNO PROTECT or UNO ADVANCED. This pad doesn't just polish beautifully, it also helps build a durable layer of protection that keeps your paint safe from the elements long-term. So your car doesn't just gloss up, it stays protected too.\u003c\/p\u003e\n\u003c!----\u003e","brand":"Rupes","offers":[{"title":"Ø 180mm","offer_id":49230598340943,"sku":"D1-RUP-9DA180B","price":16.49,"currency_code":"EUR","in_stock":false},{"title":"Ø150mm","offer_id":49230598373711,"sku":"D1-RUP-9DA150B","price":15.49,"currency_code":"EUR","in_stock":true},{"title":"Ø 100 mm","offer_id":49230598439247,"sku":"D1-RUP-9DA100B","price":9.99,"currency_code":"EUR","in_stock":false},{"title":"Ø 70mm","offer_id":49230598472015,"sku":"D1-RUP-9DA70B\/4","price":35.99,"currency_code":"EUR","in_stock":false},{"title":"Ø 40 mm","offer_id":49230598504783,"sku":"D1-RUP-9DA40B\/6","price":33.99,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/D-A-intermediate-polishing-pasd-for-dual-action-180B_side-1.jpg?v=1719915064"},{"product_id":"koch-chemie-polierpad-micro-cut-hard-foam-pad-violett-2024","title":"Micro Cut Hard Foam Pad \"Violett\" (Hard) Anti-Hologram Pad \/ Polishing Pad (2024)","description":"\u003ch1\u003e\u003cstrong\u003e\u003cem\u003eNew Pads on the Block\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e — Reworked Pad System 2024: \u003c\/strong\u003eTougher, longer-lasting and dialled in for dual-action machines. We've already got the new Koch-Chemie polishing pads in stock. Order now and you're guaranteed to get the new 2024 polishing pads.\u003c\/p\u003e\n\u003cp\u003eHere's what Koch-Chemie says: \"Our R\u0026amp;D team put serious expertise and a lot of hours into reworking the foam and the shape of our pads to improve them from the ground up. The clearly better compression hardness and cell structure give you longer life, which in turn means more value for the person using them. The pads now stand 25 mm tall with a reshaped bead, and the rounded edge boosts durability while still hugging the surface with plenty of flex. Thanks to these upgrades, our new polishing pads now work really well with dual-action machines too. That makes our new polishing pads a genuine innovation for the detailing trade. More durability with the same handling gives you a whole new feel when you're working with our polishing pads. You don't want to miss it. For maximum process reliability we're sticking with the colour coding on the pads, so matching pad to polish stays simple. That saves time and is a real help in the day-to-day grind of detailing work.\"\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Micro Cut Soft Foam Pad \"Violett\" (Soft) — Polishing Pad (2024)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Micro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e is built for the gentle treatment of sensitive and tricky paints, such as sticky paint. Its soft foam structure flexes to the paint surface and effectively clears light scratches, holograms and polishing haze. Paired with \u003cstrong\u003eMicro Cut M2.02\u003c\/strong\u003e or \u003cstrong\u003eMicro Cut \u0026amp; Finish P3.01\u003c\/strong\u003e polish, you're guaranteed a hologram-free, glossy finish. The pad is dialled in for dual-action machines and its soft build delivers gentle but effective polishing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft build\u003c\/strong\u003e for sensitive and tricky paints like sticky paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective against holograms and light scratches\u003c\/strong\u003e when used with Micro Cut polishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDialled in for dual-action machines\u003c\/strong\u003e for even, gentle work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eGentle work on sensitive paint\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMicro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e was built specifically for treating sensitive paint with a light touch. Its soft structure spreads the polish evenly without harming the paint. It's excellent for clearing holograms and light scratches and leaves a flawless finish. On tricky paints like sticky paint, the pad gives you perfect control and flex.\u003c\/p\u003e\n\u003ch3\u003eA perfect match with Micro Cut polishes\u003c\/h3\u003e\n\u003cp\u003ePaired with \u003cstrong\u003eMicro Cut M2.02\u003c\/strong\u003e or \u003cstrong\u003eMicro Cut \u0026amp; Finish P3.01\u003c\/strong\u003e, the \u003cstrong\u003eMicro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e shows what it can really do. These polishes were built for fine polishing and, combined with the soft pad, get you optimal results. The pad lets you use polish sparingly and delivers a streak-free finish with brilliant gloss.\u003c\/p\u003e\n\u003ch3\u003eGentle polishing with dual-action machines\u003c\/h3\u003e\n\u003cp\u003eWith its rounded edges and 25 mm height, the pad flexes perfectly to the surface and lets you work gently with dual-action machines. The soft foam structure cuts the risk of polishing marks and gives you even results, even on demanding paint surfaces. The pad offers maximum control and efficiency for detailers who hold their finish to the highest standard.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Micro Cut Soft Foam Pad \"Violett\" (Soft) — Polishing Pad (2024)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Micro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e is built for the gentle treatment of sensitive and tricky paints, such as sticky paint. Its soft foam structure flexes to the paint surface and effectively clears light scratches, holograms and polishing haze. Paired with \u003cstrong\u003eMicro Cut M2.02\u003c\/strong\u003e or \u003cstrong\u003eMicro Cut \u0026amp; Finish P3.01\u003c\/strong\u003e polish, you're guaranteed a hologram-free, glossy finish. The pad is dialled in for dual-action machines and its soft build delivers gentle but effective polishing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft build\u003c\/strong\u003e for sensitive and tricky paints like sticky paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective against holograms and light scratches\u003c\/strong\u003e when used with Micro Cut polishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDialled in for dual-action machines\u003c\/strong\u003e for even, gentle work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eGentle work on sensitive paint\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMicro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e was built specifically for treating sensitive paint with a light touch. Its soft structure spreads the polish evenly without harming the paint. It's excellent for clearing holograms and light scratches and leaves a flawless finish. On tricky paints like sticky paint, the pad gives you perfect control and flex.\u003c\/p\u003e\n\u003ch3\u003eA perfect match with Micro Cut polishes\u003c\/h3\u003e\n\u003cp\u003ePaired with \u003cstrong\u003eMicro Cut M2.02\u003c\/strong\u003e or \u003cstrong\u003eMicro Cut \u0026amp; Finish P3.01\u003c\/strong\u003e, the \u003cstrong\u003eMicro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e shows what it can really do. These polishes were built for fine polishing and, combined with the soft pad, get you optimal results. The pad lets you use polish sparingly and delivers a streak-free finish with brilliant gloss.\u003c\/p\u003e\n\u003ch3\u003eGentle polishing with dual-action machines\u003c\/h3\u003e\n\u003cp\u003eWith its rounded edges and 25 mm height, the pad flexes perfectly to the surface and lets you work gently with dual-action machines. The soft foam structure cuts the risk of polishing marks and gives you even results, even on demanding paint surfaces. The pad offers maximum control and efficiency for detailers who hold their finish to the highest standard.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Micro Cut Hard Foam Pad \"Violett\" (Hard) — Polishing Pad (2024)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Micro Cut Hard Foam Pad \"Violett\"\u003c\/strong\u003e is built for work on tough, high-solid paints. With its hard structure and improved compression hardness, this polishing pad is ideal for clearing holograms, light scratches and polishing haze paired with \u003cstrong\u003eMicro Cut M3.02\u003c\/strong\u003e or \u003cstrong\u003eMicro Cut \u0026amp; Finish P3.01\u003c\/strong\u003e polish. The optimised cell structure delivers maximum durability and consistently high performance. Perfect for use with dual-action machines, the \u003cstrong\u003eMicro Cut Hard Foam Pad \"Violett\"\u003c\/strong\u003e gives you precise results on demanding paint correction.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard build\u003c\/strong\u003e for efficient work on high-solid paints.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdeal for clearing holograms\u003c\/strong\u003e and light scratches when used with Micro Cut polishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDialled in for dual-action machines\u003c\/strong\u003e for controlled, even results.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eBuilt specifically for high-solid paints\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMicro Cut Hard Foam Pad \"Violett\"\u003c\/strong\u003e was built specifically for use on tough high-solid paints that bring their own hardness and structure. With its hard foam composition, the pad clears holograms, light scratches and polishing haze quickly and effectively without harming the paint surface. The robust structure keeps the pad in shape even over longer polishing sessions and always delivers precise results.\u003c\/p\u003e\n\u003ch3\u003eThe optimal match with Micro Cut polishes\u003c\/h3\u003e\n\u003cp\u003ePaired with \u003cstrong\u003eMicro Cut M3.02\u003c\/strong\u003e or \u003cstrong\u003eMicro Cut \u0026amp; Finish P3.01\u003c\/strong\u003e, the \u003cstrong\u003eMicro Cut Hard Foam Pad \"Violett\"\u003c\/strong\u003e shows its full potential. These polishes were built for the final stage of paint work and, combined with the hard pad, deliver a perfect finish. The pad's fine cutting action gets you a hologram-free surface and brings the paint back to a fresh gloss.\u003c\/p\u003e\n\u003ch3\u003ePerfect for dual-action machines\u003c\/h3\u003e\n\u003cp\u003eThanks to its rounded edges and 25 mm height, the \u003cstrong\u003eMicro Cut Hard Foam Pad \"Violett\"\u003c\/strong\u003e is ideal for use with dual-action machines. The pad's flex means it sits perfectly on the surface and gives you maximum control, even on complex paint structures. The result: even polishing with no unwanted swirl marks.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"Ø 150 mm \/ 6\"","offer_id":49737958818127,"sku":"D1-KCX-9998321","price":19.49,"currency_code":"EUR","in_stock":true},{"title":"Ø 126 mm \/ 5 inch","offer_id":49737958850895,"sku":"D1-KCX-9998320","price":18.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 76 mm \/ 3\"","offer_id":49737958883663,"sku":"D1-KCX-9998319","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 45mm \/ 1.7\"","offer_id":49737958916431,"sku":"D1-KCX-9998327","price":45.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-polierpad-micro-cut-hard-foam-pad-violett-2024.png?v=1727245930"},{"product_id":"koch-chemie-polierpad-micro-cut-soft-foam-pad-violett-2024","title":"Micro Cut Soft Foam Pad \"Violett\" (Soft) Anti-Hologram Foam \/ Polishing Pad (2024)","description":"\u003ch1\u003e\u003cstrong\u003e\u003cem\u003eNew Pads on the Block\u003c\/em\u003e\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e — Reworked Pad System 2024: \u003c\/strong\u003eTougher, longer-lasting and dialled in for DA polishers. We've already got the new Koch-Chemie polishing pads in stock. Order now and you're guaranteed the new 2024 pads.\u003c\/p\u003e\n\u003cp\u003eHere's what Koch-Chemie say about it: \"Our R\u0026amp;D team put serious expertise and a lot of hours into reworking both the foam and the shape of our pads, to genuinely improve them. The clearly upgraded foam hardness and cell structure give you longer service life, which in turn means more economy for the user. The pads now stand 25 mm tall with a reshaped bead, and the rounded edge improves durability while still hugging the surface flexibly. Thanks to these changes our new polishing pads now also work really well with DA polishers. That makes them a real innovation for the detailing market. More longevity at the same handling delivers a whole new experience with our polishing pads — not something to miss. For maximum process reliability we're sticking with the colour coding on the pads, so you can match pad to polish at a glance. That saves time and is a real help in the everyday grind of detailing.\"\u003c\/p\u003e\n\u003chr\u003e\n\u003ch2\u003e\u003cstrong\u003eKoch-Chemie Micro Cut Soft Foam Pad \"Violett\" (Soft) — Polishing Pad (2024)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eKoch-Chemie Micro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e is built for gently working sensitive and tricky paints, like Sticky Paint. Its soft foam structure flexes to follow the paint surface and pulls out light scratches, holograms and polishing haze. Paired with \u003cstrong\u003eMicro Cut M2.02\u003c\/strong\u003e or \u003cstrong\u003eMicro Cut \u0026amp; Finish P3.01\u003c\/strong\u003e polish, you get a hologram-free, glossy finish every time. The pad is dialled in for DA polishers and its soft build keeps the cut gentle but effective.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoft build\u003c\/strong\u003e for sensitive, tricky paints like Sticky Paint.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCuts through holograms and light scratches\u003c\/strong\u003e when you run it with Micro Cut polishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDialled in for DA polishers\u003c\/strong\u003e for an even, gentle pass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eGentle work on sensitive paints\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eMicro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e was built to baby sensitive paint. Its soft structure spreads the polish evenly without hammering the clear coat. It's spot-on for lifting holograms and light scratches, and it leaves a flawless finish behind. On tricky paints like Sticky Paint the pad gives you proper control and flex.\u003c\/p\u003e\n\u003ch3\u003ePerfect match with Micro Cut polishes\u003c\/h3\u003e\n\u003cp\u003eRun it with \u003cstrong\u003eMicro Cut M2.02\u003c\/strong\u003e or \u003cstrong\u003eMicro Cut \u0026amp; Finish P3.01\u003c\/strong\u003e and the \u003cstrong\u003eMicro Cut Soft Foam Pad \"Violett\"\u003c\/strong\u003e shows what it can really do. Those polishes are made for fine refining, and paired with the soft pad they hit the sweet spot. The pad lets you go easy on the polish and leaves a streak-free finish with brilliant gloss.\u003c\/p\u003e\n\u003ch3\u003eGentle polishing with DA polishers\u003c\/h3\u003e\n\u003cp\u003eWith its rounded edges and 25 mm height the pad follows the surface perfectly and keeps the pass gentle on a DA polisher. The soft foam structure cuts the risk of polishing marks and gives you even results, even on demanding paint. The pad delivers maximum control and efficiency for detailers who want the best finish.\u003c\/p\u003e","brand":"Koch-Chemie","offers":[{"title":"Ø 150 mm \/ 6\"","offer_id":49738015113551,"sku":"D1-KCX-9998318","price":19.49,"currency_code":"EUR","in_stock":true},{"title":"Ø 126 mm \/ 5 inch","offer_id":49738015179087,"sku":"D1-KCX-9998317","price":18.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 76 mm \/ 3\"","offer_id":49738015244623,"sku":"D1-KCX-9998316","price":10.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 45mm \/ 1.7\"","offer_id":49738015342927,"sku":"D1-KCX-9998326","price":45.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-polierpad-micro-cut-soft-foam-pad-violett-2024.png?v=1727245930"},{"product_id":"gyeon-q2m-finish-rotary-eccentric-polierpad","title":"Q²M Finish Polishing Pad (Rotary \/ Eccentric)","description":"\u003ch2\u003eThe last step to a flawless gloss – GYEON Q²M Finish polishing pad\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the GYEON Q²M Finish polishing pad? The GYEON Q²M Finish polishing pad is a soft finishing pad for rotary and DA machines – built for the last polishing stage with finishing compounds, for maximum depth of gloss and a hologram-free surface ready for coatings.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eThe finish pad is what crowns every paint correction job. \u003cstrong\u003eGYEON Q²M Finish polishing pad\u003c\/strong\u003e is built for the final polishing stage with \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e – a soft, fine foam cell structure that takes up finishing compounds and lays them down evenly on the paint. What you get is a hologram-free, high-gloss finish – the perfect base for a ceramic coating, or the end result of a full correction.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSoft foam cell structure for gentle finishing without holograms.\u003c\/strong\u003e The Q²M Finish pad is the softest pad in the GYEON polishing system – made for the finishing phase, where you no longer want cut, just perfect spread and gloss build-up. That soft structure keeps holograms from forming on the finishing pass.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDialled in for GYEON Q²M Polish – the combo for deep gloss.\u003c\/strong\u003e Pad and polish are matched to each other: the Q²M Finish pad spreads the fine abrasives in Q²M Polish evenly and pulls the full gloss potential out of the finishing compound – maximum depth of gloss from the very last polishing step.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRuns on both DA and rotary machines – versatile.\u003c\/strong\u003e The Q²M Finish pad works on either machine type. On a DA it gives you soft, streak-free results – ideal for the finishing pass on freshly corrected paint. On a rotary at low speed it also earns its keep on gloss-refining passes after the correction step.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e To get the best out of the Q²M Finish pad: mist the pad lightly (one spritz of water on the face) before you lay the compound down – that stops the compound drying into the pores. On a DA, work at medium speed (5–6) – too much speed on a soft finish pad kills the polishing load. When you are done, clean the pad straight away with a pad brush and water.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eThe GYEON polishing system: which pad for which step?\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M polishing system is laid out clearly: heavy defect correction is the job of the \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy Cut pad\u003c\/a\u003e with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e. Medium correction goes to the \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut pad\u003c\/a\u003e with \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e. The \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish pad\u003c\/a\u003e with Q²M Polish handles fine correction and high-gloss build-up, and finally the Q²M Finish pad with Q²M Polish for the absolute finishing touch – hologram-free, deep gloss, coating-ready. Every pad has its clearly defined slot in the sequence.\u003c\/p\u003e\n\n\u003ch3\u003eFinishing: the step that makes the difference\u003c\/h3\u003e\n\u003cp\u003ePlenty of paint jobs stop after the correction step – the paint looks good, but not perfect. Finishing with a soft pad and a finishing compound takes the result to another level: the last fine holograms and buffer trails from the correction step go away, gloss gets pushed to the max, and the surface is prepped for a ceramic coating. With the Q²M Finish pad and \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e that step is easy to run and gives you consistently excellent results.\u003c\/p\u003e\n\n\u003ch3\u003ePad care for a long service life\u003c\/h3\u003e\n\u003cp\u003ePolishing pads are an investment that will see out plenty of sessions if you look after them. Clean the Q²M Finish pad after every session with a pad brush under running water – flush the compound residue out of the pores. Let the pad air-dry lying flat – never squeeze it or store it squashed in a tight box. A clean, well-kept pad reliably beats an old, saturated one.\u003c\/p\u003e\n\n\u003ch3\u003eBuying advice: Q²M Finish pad for the perfect finish on your paint\u003c\/h3\u003e\n\u003cp\u003eThe GYEON Q²M Finish polishing pad is the last link in a professional paint correction – and the one that decides the final impression. Skip the finish pad and you give away gloss and risk visible holograms under the coating. For a complete pad set we would go: \u003ca href=\"\/en\/products\/gyeon-q2m-rotary-eccentric-heavy-cut-polierpad\"\u003eHeavy Cut\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-cut-rotary-eccentric-polierpad\"\u003eCut\u003c\/a\u003e + \u003ca href=\"\/en\/products\/gyeon-q2m-polish-rotary-eccentric-polierpad\"\u003ePolish\u003c\/a\u003e + Finish pad, paired with the full GYEON polishing kit of \u003ca href=\"\/en\/products\/gyeon-q2m-compound-plus-redefined-heavy-cut-lackpolitur\"\u003eQ²M Compound+\u003c\/a\u003e, \u003ca href=\"\/en\/products\/gyeon-q2m-compound-medium-cut-lackpolitur\"\u003eQ²M Compound\u003c\/a\u003e and \u003ca href=\"\/en\/products\/gyeon-q2m-polish-finishing-lackpolitur\"\u003eQ²M Polish\u003c\/a\u003e.\u003c\/p\u003e","brand":"GYEON","offers":[{"title":"Rotary \/ Ø 80 mm (2 pieces)","offer_id":57335258841423,"sku":"D1-GYEON-Q2MRF80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Rotary \/ Ø 145 mm (1 piece)","offer_id":57335261004111,"sku":"D1-GYEON-Q2MRF145","price":15.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 80 mm (2 pieces)","offer_id":57337737412943,"sku":"D1-GYEON-Q2MEF80","price":16.0,"currency_code":"EUR","in_stock":true},{"title":"Eccentric \/ Ø 145 mm (1 piece)","offer_id":57337737445711,"sku":"D1-GYEON-Q2MEF145","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/gyeon-q2m-finish-polierpad.png?v=1774638886"},{"product_id":"sonax-profiline-schaumpad-weich-polierpad","title":"PROFILINE SchaumPad soft polishing pad","description":"\u003ch2\u003eHologram-free finish polishing with the SONAX PROFILINE SchaumPad soft\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat makes the SONAX PROFILINE SchaumPad soft stand out? The soft, fine-pored foam pad lets you machine-polish a finish without holograms — spot-on for delicate paint, first correction attempts and the final passes after more aggressive polishing stages.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eIn the last stage of paint correction, the pad often matters more than the polish. If you leave holograms, swirls or machine marks behind after a heavy-cut pass, you've lost the whole point of the job — and you're starting over. That's exactly where the \u003cstrong\u003eSONAX PROFILINE SchaumPad soft\u003c\/strong\u003e earns its keep: a fine-pored finish pad made of open-cell foam that spreads polish residue evenly, pulls heat away in a controlled way and does no new damage even on sensitive clearcoat. It pairs minimal cut with maximum smoothness — and turns a technically solid correction into a top-shelf finish.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFine-pored foam structure for a hologram-free finish.\u003c\/strong\u003e The open-cell soft foam of the SchaumPad soft produces less shear than hard or medium pads. Polish spreads evenly over a larger contact area, which largely keeps machine marks and holograms from forming in the first place. On dark paint especially — black, dark blue, anthracite — the difference is unmistakable in raking light.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptimal heat dissipation for temperature-sensitive paint.\u003c\/strong\u003e Dual-action polishers build up local heat even at low pressure. The soft foam gives under contact pressure and stops heat from piling up on a small spot. That protects against temporary paint softening, which otherwise leads to uneven polishing marks. On thin-walled plastic parts or resprayed sections this trait really counts.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVersatile — from finish polishing to sealant prep.\u003c\/strong\u003e The SchaumPad soft works not only as the last correction step after a hard or medium cut, but also as a direct application pad for finish polishes with no prior correction. On new or only lightly used paint you can reach for it straight away — no detour through more aggressive pad grades.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e Lightly dampen the SchaumPad soft with water before its first use and squeeze out the excess. A barely damp pad takes up polish more evenly and stops dry foam from drinking the polish straight away, before it can work on the paint. Always start the polisher on the paint — never in the air — to keep polish spatter off the bodywork.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eSoft foam for paint finishing — how the fine-pored pad technology works\u003c\/h3\u003e\n\n\u003cp\u003eNot all polyurethane foam is the same. What hard and soft actually mean on a polishing pad comes down to pore size, cell structure and the Shore hardness of the foam. The \u003cstrong\u003eSchaumPad soft\u003c\/strong\u003e uses an open-cell foam structure with small, evenly spread pores — noticeably finer than the SchaumPad hard, which runs coarser cells and so generates more shear. That finer structure feeds straight into the result: polish isn't dumped in patches, it's laid down evenly across the whole working area.\u003c\/p\u003e\n\n\u003cp\u003eAnother plus is the cushioning. When you machine-polish, the pad acts as a buffer between the backing plate and the paint. Soft foam absorbs the orbits of the dual-action movement more — the pad doesn't sit rigid on the surface, it \"follows\" gentle contours, edges and curves better than a hard counterpart. On bumpers, door edges or mirrors that means even pressure without over-working the edges.\u003c\/p\u003e\n\n\u003cp\u003eIt connects to the backing plate through a hook-and-loop-compatible back that fits common SONAX PROFILINE backing plates and support plates. The 75 mm diameter suits smaller backing plates and is a great match for precision work on small areas like A-pillars, fuel-cap surrounds or door shuts. The 160 mm version is the standard reach for big body panels like the bonnet, roof and doors.\u003c\/p\u003e\n\n\u003cp\u003eAn often underrated angle is heat behaviour. Soft foam has more internal surface area and can spread heat through the pad volume better than compact materials. In fast passes with a high orbit frequency, friction heat builds at the contact patch between paint and pad. A soft pad releases that heat more evenly instead of concentrating it. That's why on sensitive solid colours, or when you're working in summer, soft foam is often the safer call over a medium pad.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the SchaumPad soft right — the workflow from first touch to a hologram-free finish\u003c\/h3\u003e\n\n\u003cp\u003eThe key step before the actual polishing is priming. Put a hazelnut-sized dab of finish polish on the SchaumPad soft sitting centred on the backing plate and spread it roughly by hand over an area about A4 size. Then start the polisher on speed 1 and work the polish over the panel with no pressure, before you raise speed and contact pressure. That first pass \"saturates\" the pad and makes sure it no longer soaks polish into its pores — from then on it releases it evenly.\u003c\/p\u003e\n\n\u003cp\u003eFor finish polishes like the \u003ca href=\"\/en\/products\/sonax-profiline-ex-04-06-hochglanz-politur\"\u003eSONAX PROFILINE EX \"04-06\" high-gloss polish\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/sonax-profiline-np-03-06-hochglanz-politur-finish\"\u003eNP \"03-06\" high-gloss polish\u003c\/a\u003e, a speed range of 3–4 on the typical dual-action polisher works well. Higher speeds do bring more heat and a touch more cut, but they also raise the risk of holograms on darker-tinted paint. Rule of thumb: slow and several times beats fast and once.\u003c\/p\u003e\n\n\u003cp\u003eThe SchaumPad soft also earns its place as the last step after a multi-stage correction. If you've worked earlier with the \u003ca href=\"\/en\/products\/sonax-profiline-schaumpad-hart-polierpad\"\u003eSchaumPad hard\u003c\/a\u003e or the \u003ca href=\"\/en\/products\/sonax-profiline-lammwollpad-wollpad\"\u003eLammwollPad\u003c\/a\u003e, the final pass with the soft pad and a pure finish polish clears every last sanding mark from the previous stage. That \"finishing run\" is standard in professional detailing outfits and is often the difference between a middling and a flawless result.\u003c\/p\u003e\n\n\u003cp\u003eAfter polishing, clean the pad straight away. Polish residue dries hard in the foam and permanently changes the pad structure. Wash it in warm water with a mild specialist pad cleaner and you'll keep the soft foam's pores intact for the long run. Best to clean it in hand-warm water with a light squeeze — no wringing, that damages the open-cell structure. Dry the pad flat on a clean towel, never in the sun or on a radiator.\u003c\/p\u003e\n\n\u003ch3\u003eHologram-free finish polishing — where the SchaumPad soft fits and where it doesn't\u003c\/h3\u003e\n\n\u003cp\u003eThe SchaumPad soft's strong suit is clearly the finish stage. On paint in near-new condition with only light transport scratches or surface wash marks, you can run it straight with a finish polish, no prior cut stage. That saves time, is kinder to the paint and is plenty for most cars that get detailed at regular intervals and carry no deep paint damage.\u003c\/p\u003e\n\n\u003cp\u003eThe SchaumPad soft is especially convincing on metallics and pearl-effect paint. These paint types, with their embedded metallic or mica flakes, are more prone to the stray-light effects that too-aggressive polishing can cause. The low shear of the soft pad keeps the effect flakes aligned, so the look after polishing matches the original state. Anyone who's ever lost a metallic to a grey haze after too aggressive a pass knows why this trait matters so much.\u003c\/p\u003e\n\n\u003cp\u003eAt the same time there are honest limits: deeper ingrained scratches, oxidation damage or wet-sanding marks from P1500 grit and coarser won't fully come out with the SchaumPad soft. Here you need a cut stage first — either with the \u003ca href=\"\/en\/products\/sonax-profiline-schaumpad-medium-polierpad\"\u003eSchaumPad medium\u003c\/a\u003e and a cutting polish, or with the SchaumPad hard or LammwollPad on heavy oxidation. The SchaumPad soft then takes over as the last stage and clears the micro-marks left by the earlier work.\u003c\/p\u003e\n\n\u003cp\u003eAnother use a lot of people underrate: prep for ceramic coatings. Before a coating goes on, the paint has to be absolutely mark-free — no hologram, no swirl. With the SchaumPad soft and an IPA-compatible finish polish you can hit a final surface where the ceramic layer bonds exactly and can deliver its full protection. This prep finishing pass is standard in pro coating outfits.\u003c\/p\u003e\n\n\u003cp\u003eOn fresh respray work, take extra care. Fresh paint hasn't fully cured in the first few weeks and reacts more sensitively to heat and mechanical pressure. The SchaumPad soft is the safest choice here because it puts in the least energy — even so, on resprays under 30 days old skip machine polishing altogether.\u003c\/p\u003e\n\n\u003ch3\u003eThe SchaumPad soft compared — when each pad is the right call\u003c\/h3\u003e\n\n\u003cp\u003eThe SONAX PROFILINE pad system is graded consistently by cut and works hand in hand with the matching polishes. The SchaumPad soft sits at the bottom of the cut curve — combined with the SchaumPad medium and the SchaumPad hard you get a full correction system that has a fitting combo for just about any paint condition.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-schaumpad-medium-polierpad\"\u003eSchaumPad medium\u003c\/a\u003e is the all-rounder for mid-level correction: it reliably clears wash marks, light swirls and old polishing marks, but on dark paint it still leaves the odd fine mark that the soft pad then cleans up. Medium followed by soft is the most efficient route for the bulk of professional details — two steps instead of three, and still a perfect result.\u003c\/p\u003e\n\n\u003cp\u003eThe SchaumPad hard is built for heavy-cut work — oxidation, deep wet-sanding, badly weathered paint. It runs higher pressure on a smaller effective contact patch and so puts down markedly more cut. On fresh or sensitive paint it's the wrong tool. Once you've worked with the SchaumPad hard, you usually step down through the SchaumPad medium as an in-between stage to the SchaumPad soft to reach a fully hologram-free result.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"\/en\/products\/sonax-profiline-lammwollpad-wollpad\"\u003eLammwollPad\u003c\/a\u003e is its own category: lambswool fibres, by their natural structure, generate very high cut that differs from a hard foam pad's. They work more aggressively but also hotter — and typically leave more polishing marks that then have to be polished out with the SchaumPad soft. The LammwollPad is ideal for extreme correction and for pros who want to save time; the SchaumPad soft is its perfect finishing partner.\u003c\/p\u003e\n\n\u003cp\u003eCompared with the \u003ca href=\"\/en\/products\/sonax-profiline-exzenterpad-weich-125-polierpad\"\u003eExzenterPad soft 125\u003c\/a\u003e — another soft pad in the PROFILINE system — there's one relevant difference: the ExzenterPad soft is laid out for the 125 mm diameter and optimised for specific dual-action machine plates. The SchaumPad soft comes in 75 mm and 160 mm, covering both extremes of the pad spectrum: precision work on small areas and fast work on big body panels.\u003c\/p\u003e\n\n\u003ch3\u003eBuying the SchaumPad soft — who it pays off for and in which workflows\u003c\/h3\u003e\n\n\u003cp\u003eThe SchaumPad soft pays off for anyone who wants to machine-polish at a professional quality level — whether you work commercially or as a committed hobby detailer. Beginners gain from the fact that the soft pad minimises the risk of mistakes: if you work with too much pressure or too high a speed, you'll cause damage far less often with the SchaumPad soft than with a more aggressive pad. That also makes it the first pad for anyone just starting to learn machine polishing.\u003c\/p\u003e\n\n\u003cp\u003eProfessional detailers value the SchaumPad soft as the last step in every multi-stage workflow. Whether after a heavy-cut pass with the SchaumPad hard, after a \u003ca href=\"\/en\/products\/sonax-profiline-perfectfinish-finish-politur\"\u003ePerfectFinish polish\u003c\/a\u003e on a mid setting, or as the final quality check before sealing — the soft pad is the one that defines the finished result. No other pad in the SONAX PROFILINE system produces such an evenly smooth, hologram-free surface in a single step.\u003c\/p\u003e\n\n\u003cp\u003ePick the size to match the polisher you own. The 75 mm version is ideal for spot correction and tight areas — it fits smaller backing plates and lets you work precisely where a 160 mm pad can't be guided under control. The 160 mm version is the panel worker: bonnet, roof, sides — this is where it plays its productivity card. A well-kitted setup has both sizes on hand and reaches for each depending on the task.\u003c\/p\u003e\n\n\u003cp\u003eAs a direct add-on, the high-grade finish polishes from the SONAX PROFILINE range make sense. The EX \"04-06\" high-gloss polish is the classic pairing pick: little to no cut, maximum gloss and gloss obsession. For paint that still carries light fine marks after a hard-cut pass, the NP \"03-06\" high-gloss polish is the sharper choice — it brings a touch more cut and works the leftover marks from the earlier stage out more surely. Both polishes are built for the SchaumPad soft and deliver the best result as a team.\u003c\/p\u003e\n\n\u003cp\u003eLook after your SchaumPad soft and it'll look after you for a long time. A carefully cleaned and air-dried pad keeps its pore structure over many uses — and with it its signature ability to release polish evenly and pull heat away in a controlled way. Pros clean their pads right after each car, store them flat in a closed container and keep used pads apart from new ones to avoid cross-contamination with polish residue. These simple habits double the effective lifespan and lock in consistent polishing results the whole way through.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"Ø75 mm","offer_id":57345170178383,"sku":"D1-SNX-4926000","price":28.49,"currency_code":"EUR","in_stock":false},{"title":"Ø160 mm","offer_id":57345170211151,"sku":"D1-SNX-4932410","price":11.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-schaumpad-weich_160-mm.png?v=1774736676"},{"product_id":"zvizzer-thermo-trapez-pad-soft-gelb-thermo-schaumpad","title":"Thermo Trapez Pad \"Soft\" thermo foam pad (Yellow)","description":"\u003ch2 id=\"speakable-headline\"\u003eHologramme entfernen und Hochglanz aufbauen statt schwer schleifen\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWas ist das ZviZZer Thermo Trapez Pad Soft? Ein weiches, trapezförmiges Polierpad aus offenzelligem Thermo-Schaum mit Klett-Rücken, gelb markiert als zweitweichste der fünf Härtestufen. Es entfernt Hologramme und Halos und baut tiefen Glanz auf. Nicht gemacht für schwere Korrektur an tiefen Kratzern oder verwittertem Lack.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eDas ZviZZer Thermo Trapez Pad Soft\u003c\/strong\u003e ist ein weiches \u003cstrong\u003ePolierpad\u003c\/strong\u003e von ZviZZer für die Maschinenpolitur, im fünfstufigen Farbsystem als Gelb markiert. Sein offenzelliger Thermo-Schaum hält die Schleifkraft über den ganzen Durchgang konstant und bleibt unter Reibungshitze formstabil, statt zu kollabieren. So trägt das gelbe Soft-Pad kaum ab und verfeinert stattdessen: Es zieht die Hologramme aus dem Lack, die ein härteres Pad hinterlassen hat, und baut Tiefe und Hochglanz auf. Der Klett-Rücken sitzt auf dem passenden Stützteller.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeicher Schaum für das saubere Finish.\u003c\/strong\u003e Das Soft-Pad ist die vierte von fünf Härtestufen und arbeitet mit minimalem Cut. Es nimmt Hologramme und feine Swirls heraus und baut Glanz auf, wo ein hartes Pad neue Spuren setzen würde. Eine erbsengroße Menge Politur deckt die Pad-Fläche ab.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermo-Schaum hält länger durch.\u003c\/strong\u003e Der offenzellige Thermo-Schaum ist bis zu rund 25 Prozent hitzestabiler als Standardschaum und verliert beim Polieren nur minimal an Schleifkraft. Dadurch hält ein Thermo-Pad ein Mehrfaches der Durchgänge eines einfachen Schaumpads, bevor es ausgetauscht werden muss.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFünf Größen für jede Fläche.\u003c\/strong\u003e Von Ø 50 mm für Spiegel, Säulen und Stoßstangenkanten bis Ø 165 mm für Türen und Hauben. Die Trapezform mit glatter Arbeitsfläche und mittiger Entlastung läuft ruhig auf Exzenter und Dual-Action-Maschinen, der Klett-Rücken passt zum jeweiligen Stützteller.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePraxistipp von Detailing1:\u003c\/strong\u003e Der häufigste Fehler ist das falsche Paar aus Pad und Politur. Ein weiches Soft-Pad unter einer groben Schleifpolitur kostet Korrektur, ein hartes Pad unter einer Finish-Politur setzt neue Hologramme. Die Farbe ist das System: gelbes Soft-Pad zur gelben Fine-Cut-Politur. Genauso wichtig ist die Pad-Hygiene. Ein mit Polierstaub zugesetztes Pad schmiert nur und überhitzt den Lack, statt Glanz aufzubauen. An einer dunklen Tür reichte uns ein Durchgang, wo ein verklebtes Pad nur Schlieren zog.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eGelbes Pad zur gelben Politur sauber halten ausklopfen\u003c\/h3\u003e\n\u003cp\u003eDas Soft-Pad bekommt eine erbsengroße Menge Finish-Politur und arbeitet sie auf dem Exzenter mit leichtem bis mittlerem Druck aus, bis der Film klar wird und Hochglanz steht.\u003c\/p\u003e\n\u003cp\u003eDie Farbe ist die Anleitung: Das gelbe Pad ist auf die gelbe \u003ca href=\"\/en\/products\/zvizzer-fc-2000-fine-cut-gelb-finish-politur\"\u003eFine-Cut-Politur\u003c\/a\u003e abgestimmt, die Hologramme nach dem Schliff herauszieht. Voraussetzung ist ein vorbereiteter Untergrund, also gewaschen, dekontaminiert und bei tiefen Kratzern bereits mit einem härteren Pad vorkorrigiert. Arbeite in Abschnitten von etwa 40 mal 40 Zentimetern.\u003c\/p\u003e\n\u003cp\u003eHalte das Pad sauber: Nach zwei bis drei Abschnitten den Polierstaub ausklopfen oder das Pad wechseln. Ein zugesetztes Pad baut keinen Glanz mehr auf und schiebt die Reibungshitze in den Lack. Die kleinen Größen ab Ø 50 mm nimmst du für Spiegel und Säulen, die großen ab Ø 140 mm für Türen und Hauben. Unter 15 Grad Lacktemperatur läuft die Ausarbeitung träger.\u003c\/p\u003e\n\u003ch3\u003eHologramme und Finish ja schwere Kratzer nein\u003c\/h3\u003e\n\u003cp\u003eDas Soft-Pad ist für den letzten Schritt gebaut: Es entfernt Hologramme, Halos und feine Swirls und bringt Tiefe in den Lack, ersetzt aber keine Korrektur an tiefen Kratzern.\u003c\/p\u003e\n\u003cp\u003eSein Kerngebiet ist das Finish nach einer Korrektur und die Ein-Schritt-Politur auf gepflegten Lacken: dort, wo der offenzellige Schaum seine konstante Schleifkraft und die Hitzestabilität ausspielt und ein gleichmäßig hologrammfreies Ergebnis liefert. Auf einer dunklen Motorhaube, wo jede Schleifspur auffällt, zeigt das weiche Pad seine Stärke besonders deutlich.\u003c\/p\u003e\n\u003cp\u003eDie Grenzen sind klar. Wenn tiefe Kratzer oder stark verwitterter Lack vorliegen, gehört ein härteres Pad mit mehr Cut unter eine Schleifpolitur, danach erst das Soft-Pad zum Finish. Wenn du das letzte Prozent Tiefe auf sehr weichem Lack willst, setzt du nach dem gelben Pad noch das grüne \u003ca href=\"\/en\/products\/zvizzer-thermo-trapez-pad-ultra-soft-gruen-thermo-schaumpad\"\u003eUltra-Soft-Pad\u003c\/a\u003e obendrauf. So deckt das abgestufte System jede Tiefe ab, statt ein Pad für alles zu überfordern.\u003c\/p\u003e\n\u003ch3\u003eFür den Finish-Polierer nicht den Schwerkorrektur-Einsatz\u003c\/h3\u003e\n\u003cp\u003eDas Soft-Pad ist die richtige Wahl, wenn du nach der Korrektur ein sauberes, hologrammfreies Finish willst oder auf einem gepflegten Lack in einem Schritt mehr Glanz holst, ohne schwer abzutragen.\u003c\/p\u003e\n\u003cp\u003eWeniger geeignet ist es für die Schwerkorrektur an vernachlässigten Lacken, weil dort der Cut fehlt. Dafür greifst du im selben Trapez-System zum härteren Orange- oder Rot-Pad. Wer regelmäßig zwischen Korrektur und Finish wechselt, fährt mit mehreren Härtestufen aus den \u003ca href=\"\/en\/collections\/polierpads-schleifschwamme\"\u003ePolierpads\u003c\/a\u003e besser als mit einem einzelnen Universalpad, denn jede Stufe macht genau einen Job richtig.\u003c\/p\u003e\n\u003cp\u003eDer eine Punkt, den die wenigsten beachten: Ein neues Pad zieht beim ersten Einsatz mehr Politur, weil der trockene Schaum sie aufsaugt. Arbeite das erste Pad-Set bewusst mit etwas mehr Material an und dosiere danach sparsamer, sonst wunderst du dich über Staub und Schlieren, die nur von der Übermenge auf einem schon gesättigten Pad kommen.\u003c\/p\u003e","brand":"ZviZZer","offers":[{"title":"Ø 50\/20\/35 mm \/ 1 Stück","offer_id":57867580735823,"sku":"D1-ZVIZZER-TTR00005020FC","price":4.89,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 1 Stück","offer_id":57867580768591,"sku":"D1-ZVIZZER-TTR00007020FC","price":5.46,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 1 Stück","offer_id":57867580801359,"sku":"D1-ZVIZZER-TTR00009020FC","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 140\/20\/125 mm \/ 1 Stück","offer_id":57867580834127,"sku":"D1-ZVIZZER-TTR00014020FC","price":11.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 165\/20\/150 mm \/ 1 Stück","offer_id":57867580866895,"sku":"D1-ZVIZZER-TTR00016520FC","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 50\/20\/35 mm \/ 10 Stück","offer_id":57882138902863,"sku":"D1-ZVIZZER-TTR00005020FC_10","price":48.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 50\/20\/35 mm \/ 50 Stück","offer_id":57882138935631,"sku":"D1-ZVIZZER-TTR00005020FC_50","price":244.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 10 Stück","offer_id":57882138968399,"sku":"D1-ZVIZZER-TTR00007020FC_10","price":54.6,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 50 Stück","offer_id":57882139001167,"sku":"D1-ZVIZZER-TTR00007020FC_50","price":273.0,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 10 Stück","offer_id":57882139033935,"sku":"D1-ZVIZZER-TTR00009020FC_10","price":59.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 50 Stück","offer_id":57882139066703,"sku":"D1-ZVIZZER-TTR00009020FC_50","price":299.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 10 Stück","offer_id":57882139099471,"sku":"D1-ZVIZZER-TTR00014020FC_10","price":119.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 50 Stück","offer_id":57882139132239,"sku":"D1-ZVIZZER-TTR00014020FC_50","price":599.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 10 Stück","offer_id":57882139165007,"sku":"D1-ZVIZZER-TTR00016520FC_10","price":159.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 50 Stück","offer_id":57882139197775,"sku":"D1-ZVIZZER-TTR00016520FC_50","price":799.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-thermo-trapez-pad-soft-gelb-thermo-schaumpad_50-20-35-mm.png?v=1780776722"},{"product_id":"zvizzer-thermo-trapez-pad-ultra-soft-gruen-thermo-schaumpad","title":"Thermo Trapez Pad \"Ultra Soft\" Thermal Foam Pad (Green)","description":"\u003ch2 id=\"speakable-headline\"\u003eDen letzten Hochglanz holen ohne neue Hologramme zu setzen\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWas ist das ZviZZer Thermo Trapez Pad Ultra Soft? Das weichste Polierpad im grünen Härtegrad, gemacht für die Finish-Stufe — es trägt fast nichts ab, sondern bringt feinsten Hochglanz und entfernt Hologramme. Nicht für tiefe Kratzer, nicht zum Defekt-Abtrag und kein Ersatz für ein hartes Cut-Pad.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eZviZZer Thermo Trapez Pad Ultra Soft\u003c\/strong\u003e ist ein trapezförmiges Polierpad von ZviZZer aus offenzelligem Thermo-Schaum mit Klett-Rücken, in der weichsten Härte Grün. Es sitzt am Ende der Politur-Kette: Wo ein hartes Pad Kratzer herausschneidet, holt das Ultra Soft den letzten Glanz und entfernt feine Hologramme. Die offene Zellstruktur hält die Politur gleichmäßig, der thermostabile Schaum bleibt auch unter Reibungshitze formstabil.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeichste Stufe für feinstes Finish.\u003c\/strong\u003e Grün ist die fünfte und weichste Härte im ZviZZer-System, hinter Blau, Rot, Orange und Gelb. Das Ultra Soft trägt praktisch nichts ab und arbeitet auf maximalen Glanz statt auf Korrektur — die richtige Wahl für die letzte Politur-Runde und weiche, dunkle Lacke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThermo-Schaum hält länger und formstabil.\u003c\/strong\u003e Der thermostabile Open-Cell-Schaum behält seine Härte auch bei hoher Temperatur und hält laut Hersteller bis zu 5-mal länger als Standard-Schaum. Ein zentrales Loch in der glatten Arbeitsfläche lässt den Schaum atmen und senkt den Hitzestau beim Polieren.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFünf Größen von 50 bis 165 mm.\u003c\/strong\u003e Das Pad gibt es in Ø 50, 70, 90, 140 und 165 mm. Kleine Durchmesser kommen an Stoßstangenkanten und Spiegel, die großen an Hauben und Türen — Pad-Größe immer an Stützteller und Fläche anpassen, sonst leidet das Ergebnis.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003ePraxistipp von Detailing1:\u003c\/strong\u003e Der häufigste Fehler beim weichen Finish-Pad ist die falsche Politur-Kombi. Wer eine grobe Schleifpolitur auf das Ultra Soft gibt, bekommt weder den Cut noch ein sauberes Finish — das weiche Pad puffert die Schnittkraft weg. Fahr es mit einer Finish-Politur. An einer dunklen Motorhaube mit feinen Hologrammen nach dem One-Step haben wir mit dem Ultra Soft plus Finish-Politur in einem leichten Durchgang einen streifenfreien Tiefenglanz hinbekommen, den ein härteres Pad so nicht liefert.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eFinish-Politur auflegen verteilen ausarbeiten abnehmen\u003c\/h3\u003e\n\u003cp\u003eDas Ultra Soft Pad gehört auf die Maschine für den letzten Schritt: eine Finish-Politur dünn auftragen, bei niedriger Drehzahl verteilen und dann mit leichtem Druck auf Hochglanz ausarbeiten.\u003c\/p\u003e\n\u003cp\u003eSetz das Pad auf einen passenden Stützteller und gib zwei bis drei erbsengroße Punkte Politur auf die Arbeitsfläche. Verteil sie bei rund 1.000 Umdrehungen, dann arbeitest du den Abschnitt bei etwa 1.600 Umdrehungen mit leichtem Druck aus, bis der Film klar wird. Den Trapez-Schliff hat ZviZZer auf Exzenter- und Dual-Action-Maschinen ausgelegt. Die passende Politur dazu ist die \u003ca href=\"\/en\/products\/zvizzer-uc-1000-ultrafine-cut-gruen-finish-politur\"\u003eUC 1000 Finish-Politur\u003c\/a\u003e im selben Grün.\u003c\/p\u003e\n\u003cp\u003eArbeite Bauteil für Bauteil und überhitze den Lack nicht — das weiche Pad und das Loch in der Mitte halten die Temperatur niedrig, aber zu viel Druck oder zu lange auf einer Stelle bringt trotzdem Hitze. Nach dem Einsatz das Pad ausdrücken, mit lauwarmem Wasser auswaschen und liegend trocknen lassen, damit der Klett-Rücken nicht aufquillt.\u003c\/p\u003e\n\u003ch3\u003eGlanz holt es Kratzer schneidet es nicht\u003c\/h3\u003e\n\u003cp\u003eDas Ultra Soft Pad bringt Glanz und entfernt Hologramme, aber es schneidet keine Kratzer heraus — dafür fehlt der weichen Stufe absichtlich die Schnittkraft.\u003c\/p\u003e\n\u003cp\u003eSeine Stärke ist das letzte Prozent: feine Hologramme nach einer One-Step-Politur, Halos auf weichen und dunklen Lacken und der tiefe Wetlook-Glanz zum Abschluss. Genau dafür ist die weichste Stufe gebaut, und die offene Zellstruktur sorgt dafür, dass die Politur über den ganzen Durchgang gleichmäßig arbeitet statt früh zu verschmieren.\u003c\/p\u003e\n\u003cp\u003eDie Grenzen sind ehrlich: Tiefe Kratzer, in die der Fingernagel hakt, und kräftige Swirls gehören vorher mit einem harten Pad und einer Schleifpolitur raus. Wenn nach dem One-Step noch leichte Hologramme stehen, nimm eine Stufe mehr Biss mit dem \u003ca href=\"\/en\/products\/zvizzer-thermo-trapez-pad-soft-gelb-thermo-schaumpad\"\u003eSoft Pad in Gelb\u003c\/a\u003e. Wenn nur noch der letzte Glanz fehlt, dann das Ultra Soft. Wenn echter Defekt-Abtrag nötig ist, dann hartes Pad plus Schleifpolitur.\u003c\/p\u003e\n\u003ch3\u003eFür den Finish-Schritt nicht für die Korrektur\u003c\/h3\u003e\n\u003cp\u003eDas Ultra Soft Pad lohnt sich für alle, die nach der Korrektur den letzten Hochglanz herausholen und Hologramme sauber entfernen wollen, besonders auf dunklen und weichen Lacken.\u003c\/p\u003e\n\u003cp\u003eWeniger geeignet ist es, wenn du erst Defekte abtragen musst — dann startest du mit einem harten Pad aus der \u003ca href=\"\/en\/collections\/polierpads-schleifschwamme\"\u003ePolierpad-Kategorie\u003c\/a\u003e und einer Schleifpolitur und steigst Stufe für Stufe ab. Wer dagegen sauber vorgearbeitet hat, setzt mit dem Ultra Soft den finalen Glanz, ohne neue Hologramme zu riskieren.\u003c\/p\u003e\n\u003cp\u003eDer eine Trick, den die wenigsten beachten: Wasch ein neues Pad einmal vor dem ersten Einsatz aus und drück es leicht an. Frischer Thermo-Schaum nimmt die erste Politur sonst ungleichmäßig auf, und gerade auf einem schwarzen Lack siehst du jeden Unterschied in der Aufnahme. Ein kurz angefeuchtetes, ausgedrücktes Pad startet gleichmäßig — und hält durch die Thermo-Struktur deutlich mehr Durchgänge durch als ein Standard-Schaumpad.\u003c\/p\u003e","brand":"ZviZZer","offers":[{"title":"Ø 50\/20\/35 mm \/ 1 Stück","offer_id":57867588632911,"sku":"D1-ZVIZZER-TTR00005020UC","price":4.89,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 1 Stück","offer_id":57867588665679,"sku":"D1-ZVIZZER-TTR00007020UC","price":5.46,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 1 Stück","offer_id":57867588698447,"sku":"D1-ZVIZZER-TTR00009020UC","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 140\/20\/125 mm \/ 1 Stück","offer_id":57867588731215,"sku":"D1-ZVIZZER-TTR00014020UC","price":11.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 165\/20\/150 mm \/ 1 Stück","offer_id":57867588763983,"sku":"D1-ZVIZZER-TTR00016520UC","price":15.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 50\/20\/35 mm \/ 10 Stück","offer_id":57882157711695,"sku":"D1-ZVIZZER-TTR00005020UC_10","price":48.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 50\/20\/35 mm \/ 50 Stück","offer_id":57882157744463,"sku":"D1-ZVIZZER-TTR00005020UC_50","price":244.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 10 Stück","offer_id":57882157777231,"sku":"D1-ZVIZZER-TTR00007020UC_10","price":54.6,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 50 Stück","offer_id":57882157809999,"sku":"D1-ZVIZZER-TTR00007020UC_50","price":273.0,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 10 Stück","offer_id":57882157842767,"sku":"D1-ZVIZZER-TTR00009020UC_10","price":59.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 50 Stück","offer_id":57882157875535,"sku":"D1-ZVIZZER-TTR00009020UC_50","price":299.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 10 Stück","offer_id":57882157908303,"sku":"D1-ZVIZZER-TTR00014020UC_10","price":119.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 50 Stück","offer_id":57882157941071,"sku":"D1-ZVIZZER-TTR00014020UC_50","price":599.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 10 Stück","offer_id":57882157973839,"sku":"D1-ZVIZZER-TTR00016520UC_10","price":159.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 50 Stück","offer_id":57882158006607,"sku":"D1-ZVIZZER-TTR00016520UC_50","price":799.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-thermo-trapez-pad-ultra-soft-gruen-thermo-schaumpad_50-20-35-mm.png?v=1780776729"},{"product_id":"zvizzer-thermo-allrounder-pad-soft-gelb-thermo-schaumpad","title":"Thermo Allrounder Pad \"Soft\" Thermo Foam Pad (Yellow)","description":"\u003ch2 id=\"speakable-headline\"\u003eA soft pad for hologram-free high gloss in the finish\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWhat is the ZviZZer Thermo Allrounder Pad Soft? It's a soft polishing pad made of open-cell thermo foam with a rubber backing layer and hook-and-loop, marked yellow in the colour system as the soft grade. It's built for finish polishing, cuts very little and builds gloss. Not for buffing out deep scratches and not a stand-in for a hard cutting-compound combo.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eZviZZer Allrounder Pad Soft\u003c\/strong\u003e is a soft polishing pad from ZviZZer made of open-cell thermo foam, marked yellow in the five-step colour system and therefore the soft grade. Three layers are bonded together: the hook-and-loop face, a closed-cell rubber backing layer and the dimensionally stable thermo foam on top. This build keeps the cut constant, because the foam doesn't go soft under friction, and that gives you an even, hologram-free finish. It runs on both dual-action and rotary.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstant cut thanks to thermo foam.\u003c\/strong\u003e The open-cell thermo foam stays dimensionally stable and doesn't soften under heat, unlike a standard foam pad. That means the soft pad works evenly across a whole side of the car and leaves no holograms. According to ZviZZer, the tear-resistant foam lasts up to 6 times longer than a conventional pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber backing layer for a smooth run.\u003c\/strong\u003e Between the hook-and-loop and the foam sits a 20 mm layer of closed-cell foam and rubber. It dampens vibration, lets the machine run smoother and stops polish from soaking through to the backing plate. That keeps the hook-and-loop face clean and adds even more to the pad's life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive sizes from Ø 50 to 165 mm.\u003c\/strong\u003e The pad comes in five diameters for every backing plate and every spot. The big 140 and 165 mm cover panels fast, the small 50 and 70 mm get into mirrors, pillars and bumper edges. So you polish a whole car with one type of pad in one hardness.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common mistake with a soft finishing pad is the wrong polish to go with it. Pair a coarse cutting compound with the soft pad and you'll wonder why there's no correction and why the paint just smears. Pad hardness and polish grit have to match, and the yellow soft pad belongs with a fine finishing polish. Here in Nordhorn, on a soft Japanese clear coat, 3 pea-sized drops of FC 2000 on the soft pad got us a clean mirror where a harder pad still pulled holograms.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003ePad hardness and polish have to match each other\u003c\/h3\u003e\n\u003cp\u003eThe soft pad only gives up its cut with the right polish: soft pad plus a fine finishing polish gives you gloss, soft pad plus a coarse polish just gives you smear.\u003c\/p\u003e\n\u003cp\u003eDay-to-day, the yellow ZviZZer Allrounder Pad Soft is the partner to the \u003ca href=\"\/en\/products\/zvizzer-fc-2000-fine-cut-gelb-finish-politur\"\u003eFC 2000 finishing polish\u003c\/a\u003e in the same yellow grade. You put about 3 pea-sized drops on the pad, spread them at low speed and then work them out at medium speed with light pressure until the film goes clear. Work in sections of about 40 by 40 centimetres.\u003c\/p\u003e\n\u003cp\u003eKeep the pad clean: after two or three sections, knock out the polishing dust and swap the pad if you need to. A clogged pad smears and stops building gloss. Pick the right diameter to suit your backing plate and the spot — a second \u003ca href=\"\/en\/collections\/polierpads-schleifschwamme\"\u003epolishing pad\u003c\/a\u003e in a small size is well worth it for tight edges.\u003c\/p\u003e\n\u003ch3\u003eFinish and gloss yes, heavy correction no\u003c\/h3\u003e\n\u003cp\u003eThe soft pad is the soft grade for finishing and building gloss: it cuts very little and refines the surface rather than removing material.\u003c\/p\u003e\n\u003cp\u003eIts home turf is the last step: pulling holograms and fine halos after a correction, working out depth and a mirror, smoothing a base for wax or coating. On soft paints like Japanese clear coats, which marr quickly under harder pads, it plays to its strength because it stays gentle and still builds gloss.\u003c\/p\u003e\n\u003cp\u003eThe limits are clear: when deep scratches or heavy swirls need to go, the soft pad is too soft — that's when a harder orange or red pad with a cutting compound belongs on the machine. If you want to finish down a touch finer, say on very dark soft paint, you reach for the even softer \u003ca href=\"\/en\/products\/zvizzer-thermo-allrounder-pad-ultra-soft-gruen-thermo-schaumpad\"\u003eUltra-Soft pad in green\u003c\/a\u003e. And a pad on its own corrects nothing: the cut only comes from pad hardness and polish grit working together.\u003c\/p\u003e\n\u003ch3\u003eFor the finishing step, not the first cut\u003c\/h3\u003e\n\u003cp\u003eThe ZviZZer Allrounder Pad Soft is the right call when you want to grab that last percent of gloss and depth after correction, without risking fresh marring.\u003c\/p\u003e\n\u003cp\u003eIt's less suited to the first heavy pass on neglected paint, where you need to cut. If you run a full stepped system, you combine the pad hardnesses: a hard pad for the cut, this soft pad for the finish. Pick the sizes to suit the car and the spot, from the 165 mm for doors and bonnets down to the 50 mm for mirrors and swage lines.\u003c\/p\u003e\n\u003cp\u003eOne detail that decides the pad's life and that hardly anyone bothers with: wash the pad out after polishing, before the polish cures inside it. Cured polish residue gums up the open foam, and then it loses both grip and gloss. Let it air-dry, not in the sun. That way the tear-resistant thermo foam stays dimensionally stable for a long time and you really do get the six-fold lifespan out of it, instead of binning the pad after a few cars.\u003c\/p\u003e","brand":"ZviZZer","offers":[{"title":"Ø 50\/20\/35 mm \/ 1 Stück","offer_id":57867589484879,"sku":"D1-ZVIZZER-TAR00005020FC","price":5.83,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 1 Stück","offer_id":57867589517647,"sku":"D1-ZVIZZER-TAR00007020FC","price":6.69,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 1 Stück","offer_id":57867589550415,"sku":"D1-ZVIZZER-TAR00009020FC","price":5.99,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 1 Stück","offer_id":57867589583183,"sku":"D1-ZVIZZER-TAR00014020FC","price":12.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 165\/20\/150 mm \/ 1 Stück","offer_id":57867589615951,"sku":"D1-ZVIZZER-TAR00016520FC","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 50\/20\/35 mm \/ 10 Stück","offer_id":57882118029647,"sku":"D1-ZVIZZER-TAR00005020FC_10","price":58.3,"currency_code":"EUR","in_stock":false},{"title":"Ø 50\/20\/35 mm \/ 50 Stück","offer_id":57882118062415,"sku":"D1-ZVIZZER-TAR00005020FC_50","price":291.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 10 Stück","offer_id":57882118095183,"sku":"D1-ZVIZZER-TAR00007020FC_10","price":66.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 50 Stück","offer_id":57882118127951,"sku":"D1-ZVIZZER-TAR00007020FC_50","price":334.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 10 Stück","offer_id":57882118160719,"sku":"D1-ZVIZZER-TAR00009020FC_10","price":59.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 50 Stück","offer_id":57882118193487,"sku":"D1-ZVIZZER-TAR00009020FC_50","price":299.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 10 Stück","offer_id":57882118226255,"sku":"D1-ZVIZZER-TAR00014020FC_10","price":129.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 50 Stück","offer_id":57882118259023,"sku":"D1-ZVIZZER-TAR00014020FC_50","price":649.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 10 Stück","offer_id":57882118291791,"sku":"D1-ZVIZZER-TAR00016520FC_10","price":169.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 50 Stück","offer_id":57882118324559,"sku":"D1-ZVIZZER-TAR00016520FC_50","price":849.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-thermo-allrounder-pad-soft-gelb-thermo-schaumpad_50-20-35-mm.png?v=1780779407"},{"product_id":"zvizzer-thermo-allrounder-pad-ultra-soft-gruen-thermo-schaumpad","title":"Thermo Allrounder Pad \"Ultra Soft\" Thermo Foam Pad (Green)","description":"\u003ch2 id=\"speakable-headline\"\u003eRemove holograms and seal in deep gloss\u003c\/h2\u003e\n\u003cblockquote id=\"speakable-summary\"\u003e\u003cp\u003e\u003cem\u003eWhat is the ZviZZer Thermo Allrounder Pad Ultra Soft? It's the softest finishing pad in ZviZZer's green colour system, made from open-pore thermo foam with a rubber backing layer. It removes holograms and the finest micro-scratches and lays down sealant or wax evenly. It's not built for cutting out scratches and not meant for one-step correction.\u003c\/em\u003e\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe ZviZZer Thermo Allrounder Pad Ultra Soft\u003c\/strong\u003e is a thermo foam pad from ZviZZer in the softest grade, green. On this \u003cstrong\u003eUltra Soft pad\u003c\/strong\u003e an open-pore polishing foam sits on a sealed cushion made of a foam-rubber blend that dampens vibration and carries the rotational force onto the paint without losing any of it. That's how it builds gloss without setting fresh holograms, and spreads sealant or wax streak-free.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish and sealing without new holograms.\u003c\/strong\u003e The open-pore thermo foam cuts nothing — it refines: it pulls out the finest micro-scratches and halos and brings up a deep mirror gloss that really shows on dark paint. A pea-sized blob of polish covers one pad's worth of panel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber backing layer for a smooth run.\u003c\/strong\u003e It's the only ZviZZer pad with a foam-rubber layer between the hook-and-loop and the foam. It drops the vibration and keeps the contact pressure even — on a bonnet roughly 40 by 40 centimetres the gloss stays uniform instead of patchy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive sizes for every panel.\u003c\/strong\u003e From Ø 50 mm for mirror caps and swage lines up to Ø 165 mm for the roof and doors, the pad covers every area. The 20 mm profile height is the sweet spot for beginners and pros alike, and the milled edges extend its working life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cblockquote class=\"praxistipp\"\u003e\u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e What we see day-to-day, the most common mistake with an ultra-soft pad is dry scrubbing at too high a speed. With no film of polish, the open-pore foam rubs on the paint, builds up heat and sets exactly the holograms it's supposed to remove — we reproduced that in a test on soft black paint. Keep the pad damp, work at a moderate speed and tap it out every two or three sections. A clean, lightly dampened pad finishes better than a clogged one.\u003c\/p\u003e\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003ch3\u003eLittle polish, keep it damp and work it up to high gloss\u003c\/h3\u003e\n\u003cp\u003eYou work the Ultra Soft pad with a pea-sized blob of finishing polish at a moderate speed until the polish film goes clear and the mirror gloss stands.\u003c\/p\u003e\n\u003cp\u003eBy colour and grade it pairs with the green \u003ca href=\"\/en\/products\/zvizzer-uc-1000-ultrafine-cut-gruen-finish-politur\"\u003eUC 1000 finishing polish\u003c\/a\u003e, which pulls out the finest swirls and seals in the same pass. Step up one grade of bite with the yellow \u003ca href=\"\/en\/products\/zvizzer-thermo-allrounder-pad-soft-gelb-thermo-schaumpad\"\u003esoft pad\u003c\/a\u003e when there are still visible holograms after a cutting step. Work in sections of about 40 by 40 centimetres.\u003c\/p\u003e\n\u003cp\u003eKeep the pad clean: after two or three sections, tap out the polish dust or switch to a fresh pad. A clogged pad just smears and won't build any more gloss. You can clean it with a brush, compressed air or in the wash at 30 to 40 degrees — then air-dry it, never in the dryer.\u003c\/p\u003e\n\u003ch3\u003eFinish and sealing yes, scratch correction no\u003c\/h3\u003e\n\u003cp\u003eThe Ultra Soft pad is built for the last step — holograms gone, gloss in, coating laid down evenly. It deliberately doesn't correct, because the soft grade soaks up the cutting power of any polish.\u003c\/p\u003e\n\u003cp\u003eThat's exactly its strength when jewelling dark, soft paint and when machine-applying coatings, where a harder pad would drag streaks. Over the rubber backing layer it runs smooth enough that even beginners can pull off a clean mirror.\u003c\/p\u003e\n\u003cp\u003eThe limits are clear: when there are scratches or swirls in the paint, reach first for a harder pad from the \u003ca href=\"\/en\/collections\/polierpads-schleifschwamme\"\u003epolishing pad category\u003c\/a\u003e with a cutting or one-step polish, and only then bring in the Ultra Soft pad as the finish. If you want to correct and shine in a single pass, the medium-hard orange pad is the better call — on the green pad the correction just won't happen.\u003c\/p\u003e\n\u003ch3\u003eFor the finishing polisher, not the quick reconditioner\u003c\/h3\u003e\n\u003cp\u003eThe Ultra Soft pad is the right call when you want that last percent of depth after correction, or when you need to lay a coating down mirror-smooth.\u003c\/p\u003e\n\u003cp\u003eIt's less suited to the quick reconditioner who wants to be done in one pass: with no cut, every defect stays visible. If you regularly work from scratch all the way to a mirror, you're better off with the graded ZviZZer pad system from Ultra Hard to Ultra Soft than with a single pad — each colour a hardness, each hardness a job.\u003c\/p\u003e\n\u003cp\u003eThe one trick no manufacturer writes down: wash a new pad out once and squeeze it dry before you start. Otherwise factory residue in the fresh foam spreads through the first layer and leaves a fine haze on exactly the dark paint the Ultra Soft pad is meant to make shine.\u003c\/p\u003e\n","brand":"ZviZZer","offers":[{"title":"Ø 50\/20\/35 mm \/ 1 Stück","offer_id":57867589648719,"sku":"D1-ZVIZZER-TAR00005020UC","price":5.83,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 1 Stück","offer_id":57867589681487,"sku":"D1-ZVIZZER-TAR00007020UC","price":6.69,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 1 Stück","offer_id":57867589714255,"sku":"D1-ZVIZZER-TAR00009020UC","price":5.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 140\/20\/125 mm \/ 1 Stück","offer_id":57867589747023,"sku":"D1-ZVIZZER-TAR00014020UC","price":12.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 165\/20\/150 mm \/ 1 Stück","offer_id":57867589779791,"sku":"D1-ZVIZZER-TAR00016520UC","price":16.99,"currency_code":"EUR","in_stock":true},{"title":"Ø 90\/20\/75 mm \/ 10 Stück","offer_id":57881920667983,"sku":"D1-ZVIZZER-TAR00009020UC_10","price":59.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 90\/20\/75 mm \/ 50 Stück","offer_id":57881920700751,"sku":"D1-ZVIZZER-TAR00009020UC_50","price":299.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 50\/20\/35 mm \/ 10 Stück","offer_id":57881932923215,"sku":"D1-ZVIZZER-TAR00005020UC_10","price":58.3,"currency_code":"EUR","in_stock":false},{"title":"Ø 50\/20\/35 mm \/ 50 Stück","offer_id":57881932955983,"sku":"D1-ZVIZZER-TAR00005020UC_50","price":291.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 10 Stück","offer_id":57881932988751,"sku":"D1-ZVIZZER-TAR00007020UC_10","price":66.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 70\/20\/55 mm \/ 50 Stück","offer_id":57881933021519,"sku":"D1-ZVIZZER-TAR00007020UC_50","price":334.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 10 Stück","offer_id":57881933054287,"sku":"D1-ZVIZZER-TAR00014020UC_10","price":129.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 140\/20\/125 mm \/ 50 Stück","offer_id":57881933087055,"sku":"D1-ZVIZZER-TAR00014020UC_50","price":649.5,"currency_code":"EUR","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 10 Stück","offer_id":57881933119823,"sku":"D1-ZVIZZER-TAR00016520UC_10","price":169.9,"currency_code":"EUR","in_stock":false},{"title":"Ø 165\/20\/150 mm \/ 50 Stück","offer_id":57881933152591,"sku":"D1-ZVIZZER-TAR00016520UC_50","price":849.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/zvizzer-thermo-allrounder-pad-ultra-soft-gruen-thermo-schaumpad_50-20-35-mm.png?v=1780779681"}],"url":"https:\/\/detailing1.be\/en\/collections\/kleine-pads-finishing-pads-aus-schaumstoff.oembed","provider":"Detailing1","version":"1.0","type":"link"}