{"title":"Pumpschaumsprüher","description":"\u003ch2 id=\"speakable-headline\"\u003ePumpschaumsprüher\u003c\/h2\u003e\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003ePumpschaumsprüher\u003c\/strong\u003e: Handpump-Schaumsprüher erzeugen Schaum aus passenden Reinigungsmitteln. Der Druck wird von Hand aufgebaut; Düsenbild, Füllmenge und Mittelverträglichkeit bestimmen die passende Ausführung.\u003c\/p\u003e\n\u003cp\u003eDichtungsmaterial, Düse und Geräteanschluss müssen zum Einsatz passen; ein dichter Schaum ist nicht automatisch ein Maß für die Reinigungskraft.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/kompakte-pumpschaumsprueher\"\u003eKompakte Pumpschaumsprüher\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en\/collections\/grosse-pumpschaumsprueher\"\u003eGroße Pumpschaumsprüher\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"koch-chemie-foamer-bottle-schaumspender-150ml","title":"Foamer Bottle","description":"\u003ch2 id=\"speakable-headline\"\u003eLay concentrated interior cleaners down as a dry, dosed foam\u003c\/h2\u003e\n\n\u003cblockquote id=\"speakable-summary\"\u003e\n  \u003cp\u003e\u003cem\u003eWhat is the Koch-Chemie Foamer Bottle? A 150 ml pump bottle with a dilution scale up to 1:10 that turns cleaner concentrates into a dry, high-volume foam — spot-on for upholstery, leather and Alcantara. Not for strong acidic wheel cleaners, bug removers, solvents or ready-to-use cleaners, since the bottle is built for concentrates you dilute yourself.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp id=\"speakable-definition\"\u003e\u003cstrong\u003eThe Koch-Chemie Foamer Bottle\u003c\/strong\u003e (Koch Chemie Foamer Bottle) is a foam dispenser from Koch-Chemie that turns concentrated cleaners into a dry, lamella-rich foam via a built-in mixing chamber and a pump head. The active stays on the fibre longer, because the cleaning solution doesn't flood the surface like a spray — it sits there as a fine-pored foam and works the substrate layer by layer instead of soaking it through.\u003c\/p\u003e\n\n\u003cp\u003eThe side of the bottle has a volume and dilution scale printed on it, marking ratios from 1:1 to 1:10 clearly. You fill water up to the dilution mark you want first, then add the concentrate — not the other way round, or the cleaner foams up while you're filling and you lose volume. That order is the most common mistake we see day-to-day, and the reason some detailers report foam-density problems.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eScale 1:1 to 1:10 on the bottle.\u003c\/strong\u003e 150 ml of concentrate at 1:10 gives you about 1.65 litres of ready-to-use cleaning solution — on a typical interior job with COLOURLOCK Pol Star concentrate that's enough for four to five complete cars. No measuring cup or syringe to carry around, and the dilution is repeatable every time you refill.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDry foam instead of a wet spray.\u003c\/strong\u003e The pump head makes a fine-pored foam that clings vertically to seat bolsters and door cards without seeping through. On upholstery and Alcantara that means the active stays in the dirt instead of in the foam core, and the brush works cleaner because it doesn't have to push through a layer of water.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDosed product use.\u003c\/strong\u003e One fill of the Foamer Bottle covers the full interior detail of a mid-size car (seats, carpet, headliner, door cards, centre console) — using 80 to 120 ml of diluted solution. Compared with spraying straight from a 1-litre bottle, that cuts cleaner use by about two thirds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-foamer-bottle-schaumspender-150ml_hero.jpg?v=1777826972\" alt=\"Water being poured into the Koch-Chemie Foamer Bottle, Pol Star concentrate next to it, Porsche 911 Turbo S in the background\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDetailing1's tip from the shop:\u003c\/strong\u003e The most common reason a pump mechanism fails isn't a defect — it's dried-out cleaner concentrate sitting in the pump chamber. After every cleaning session, empty the bottle, refill with clean tap water and pump 8 to 10 strokes dry until only water comes out. Those 60 seconds of care add a lot to the life of the Foamer Bottle — a pump that dries out with cleaner residue jams the return spring and then has to be pushed back by hand.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eWater first, concentrate after, read the scale\u003c\/h3\u003e\n\u003cp\u003eUnscrew the pump head, fill the bottle with lukewarm tap water up to the dilution mark you want, and only then top up with the concentrate — say COLOURLOCK Pol Star or the all-purpose cleaner \"Mzr\" — to the 100-percent mark. Put the pump head back on, tip the bottle two or three times rather than shaking it so no premature foam climbs into the pump chamber, and prime three to four strokes until stable foam comes out.\u003c\/p\u003e\n\n\u003cp\u003eWhat matters is keeping concentrate and ready-to-use apart: the classic Pol Star \"Po\" 1L comes ready to go in the spray bottle and is NOT to be diluted — that one goes straight onto the upholstery. The Foamer Bottle is meant for the concentrate line (COLOURLOCK Pol Star, Green Star \"Gs\", all-purpose cleaner \"Mzr\"), which you couldn't use at all without diluting because it's dosed too strong.\u003c\/p\u003e\n\n\u003cp\u003eThen wipe down with a damp microfibre cloth in one direction — never back and forth, or the dirt you've lifted works its way back into the weave. On heavily soiled seat bolsters or the top edges of backrests, a second pass with less foam beats a longer dwell time on the first pass, because the foam lamellae start to collapse after 90 seconds and the active stops working.\u003c\/p\u003e\n\n\u003cp\u003eThe dilution matrix for the most common jobs looks like this:\u003c\/p\u003e\n\n\u003ctable\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n\u003cth\u003eConcentrate\u003c\/th\u003e\n\u003cth\u003eDilution\u003c\/th\u003e\n\u003cth\u003eSurface\u003c\/th\u003e\n\u003cth\u003eDwell time\u003c\/th\u003e\n\u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCOLOURLOCK Pol Star\u003c\/td\u003e\n\u003ctd\u003e1:10\u003c\/td\u003e\n\u003ctd\u003eUpholstery, Alcantara, cloth seats\u003c\/td\u003e\n\u003ctd\u003e1–2 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCOLOURLOCK Pol Star\u003c\/td\u003e\n\u003ctd\u003e1:5\u003c\/td\u003e\n\u003ctd\u003eSmooth leather, moderate soiling\u003c\/td\u003e\n\u003ctd\u003e1 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAll-purpose cleaner Mzr\u003c\/td\u003e\n\u003ctd\u003e1:5\u003c\/td\u003e\n\u003ctd\u003eCockpit, plastic door cards\u003c\/td\u003e\n\u003ctd\u003e30 sec\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGreen Star Gs\u003c\/td\u003e\n\u003ctd\u003e1:10\u003c\/td\u003e\n\u003ctd\u003eGeneral interior surfaces\u003c\/td\u003e\n\u003ctd\u003e1 min\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAll-purpose cleaner Mzr\u003c\/td\u003e\n\u003ctd\u003e1:10\u003c\/td\u003e\n\u003ctd\u003eHeadliner, cloth roof lining\u003c\/td\u003e\n\u003ctd\u003e30 sec\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-foamer-bottle-schaumspender-150ml_anwendung.jpg?v=1777826972\" alt=\"Bubbly foam from the Koch-Chemie Foamer Bottle being pumped onto a black leather sample in the Detailing1 warehouse\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003ch3\u003eNot for acidic cleaners, and no snow-foam-cannon volumes\u003c\/h3\u003e\n\u003cp\u003eThe Foamer Bottle covers the mid dilution range for interior chemistry — it's not a one-tool-does-everything replacement for other application gear. Strong acidic wheel cleaners, acidic bug removers and solvent-based tar removers don't belong in the dispenser, because the polypropylene seals and the stainless return spring take damage within a few uses at pH below 4 or with aromatic solvents.\u003c\/p\u003e\n\n\u003cp\u003eReady-to-use interior cleaners like the classic Pol Star \"Po\" 1L or Top Star \"Ts\" don't belong decanted into the Foamer Bottle either — those are set to the right concentration from the factory and would only take a pointless detour through the dispenser instead of coming straight out of the spray bottle. The Foamer Bottle is a dilution and foaming tool, not a decanting container.\u003c\/p\u003e\n\n\u003cp\u003eFor an exterior wash the 150 ml fill is simply too small and the spray radius too tight — foaming a whole body with the pump bottle takes half an hour and tires your hand out. If you want to foam paint, that's a job for a snow-foam cannon on the pressure washer, or at least a 1-litre pump sprayer with a foam nozzle.\u003c\/p\u003e\n\n\u003cp\u003ePinpoint work on interior surfaces → Foamer Bottle. Wide-area body pre-wash → snow-foam cannon or \u003ca href=\"\/en\/collections\/snow-foam\"\u003esnow foam cleaner\u003c\/a\u003e off the pressure washer. The second limit comes from day-to-day use: the pump head has a limited stroke volume, and after 200 to 300 strokes with undiluted concentrate the spring force drops off. Diluting here isn't optional — it's the technical condition for a long life.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-foamer-bottle-schaumspender-150ml_detail.jpg?v=1777826972\" alt=\"Koch-Chemie Foamer Bottle 150 ml with dilution scale 1:1 to 1:5 next to Koch-Chemie Pol Star concentrate in the Detailing1 warehouse\" loading=\"lazy\" width=\"1200\"\u003e\n\n\u003ch3\u003eFor targeted interior work, not for the whole wash\u003c\/h3\u003e\n\u003cp\u003eThe Foamer Bottle is the right call for anyone who regularly does interior detail with concentrate cleaners — your own cars, small detailing setups, commercial detailers who specialise in upholstery. If you've already got COLOURLOCK Pol Star or the all-purpose cleaner on the shelf, the dispenser is the obvious way to lay it down.\u003c\/p\u003e\n\n\u003cp\u003eIt's a worse fit if you only do a rough interior clean once or twice a year — then the spray mist straight from the original bottle of a ready-to-use cleaner is enough, and you skip the pump as a wear part entirely. In pure high-throughput commercial work too, where ten to fifteen interiors get done a day, it's worth investing in a Tornador foam attachment that runs on compressed air — that makes more foam per second and takes the load off your hand in continuous use.\u003c\/p\u003e\n\n\u003cp\u003eThe full interior detailing set pairs the Foamer Bottle with three parts: a concentrate as the chemical side, a medium-firm \u003ca href=\"\/en\/collections\/buersten\"\u003eupholstery brush\u003c\/a\u003e for the mechanical side, and a microfibre cloth to pick it all up. For the concentrate, the \u003ca href=\"\/en\/products\/koch-chemie-colourlock-pol-star-reinigerkonzentrat-textil-leder-alcantara\"\u003eCOLOURLOCK Pol Star cleaner concentrate\u003c\/a\u003e in the 1-litre bottle is the one to grab — diluted it gives you several seasons of interior cleaning and it's tuned for upholstery, leather and Alcantara.\u003c\/p\u003e\n\n\u003cp\u003eThe unit price of 5.99 EUR sits below the typical consumable cost of a single interior detail — economically the accessory pays for itself from the third job on, because concentrate use runs about two thirds lower than spraying straight from a standard bottle. At ten interior sessions a year the Foamer Bottle pays for itself in the first month. This isn't a premium tool, it's a consumable — and that's exactly the category where it works best.\u003c\/p\u003e\n\n\u003cp\u003eThe one trick the maker doesn't write down: after every cleaning session, flush the pump through with clean water and leave the bottle open to dry out. Those 60 seconds of care turn the 5.99 EUR wear part into a tool that easily lasts two or three seasons — and that's exactly where the negative reviews fall down, hitting the missing care rather than the product.\u003c\/p\u003e\n\n\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/d1_koch-chemie-foamer-bottle-schaumspender-150ml_workflow.jpg?v=1777826972\" alt=\"Application set with Koch-Chemie Foamer Bottle, Pol Star concentrate, upholstery brush and microfibre cloth on a stainless-steel workbench\" loading=\"lazy\" width=\"1200\"\u003e\n","brand":"Koch-Chemie","offers":[{"title":"150 ml","offer_id":48867490890063,"sku":"D1-KCX-9998145","price":8.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/9998145__1715052916.png?v=1715112378"},{"product_id":"ik-sprayers-pumpschaumsprueher-ik-foam-pro-2","title":"\"iK Foam\" Pro 2 Pump Foam Sprayer (incl. colour coding)","description":"\u003ch2\u003e \u003cstrong\u003eiK Sprayers \"iK Foam\" Pro 2 – Pump Foam Sprayer\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2\u003c\/strong\u003e pump foam sprayer is a pro tool for laying down dry, long-lasting foam. Built for surfactant-based chemistry, it kicks out a thick, clingy foam that stays put — ideal for cleaning, sanitary and disinfection jobs. A perfect match for car washing and any other pro use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks hard:\u003c\/strong\u003e Lays down thick foam that does the heavy lifting for you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eErgonomic build:\u003c\/strong\u003e Wide fill opening and a safety valve for easy handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile:\u003c\/strong\u003e At home across trades, from car care to disinfection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eAn ergonomic build made for pro use\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2\u003c\/strong\u003e pump foam sprayer is built for daily pro work. The wide fill opening and ergonomic shape make it easy to live with. The safety valve is set to 3 bar so you can bleed off pressure safely, and the solid base keeps it standing steady while you work.\u003c\/p\u003e\n\u003ch3\u003eVersatile and adaptable\u003c\/h3\u003e\n\u003cp\u003eThis foam sprayer gives you three foam settings: light, medium and heavy. The coloured caps make it easy to tell at a glance what's in the tank. That flexibility makes it a great fit for cars, bikes and food processing alike.\u003c\/p\u003e\n\u003ch3\u003eEasy to maintain and handle\u003c\/h3\u003e\n\u003cp\u003eTool-free assembly and teardown make servicing the \u003cstrong\u003eiK Foam Pro 2\u003c\/strong\u003e a breeze. The clear housing lets you keep an eye on the fill level at all times, so you keep moving without guesswork.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"1.25 liters","offer_id":49337288819023,"sku":"D1-IKS-81676","price":29.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-pumpschaumsprueher-ik-foam-pro-2.png?v=1721418619"},{"product_id":"ik-sprayers-pumpschaumsprueher-ik-foam-15","title":"\"iK Foam\" 1.5 Pump Foam Sprayer","description":"\u003ch2\u003eiK Sprayers \"iK Foam\" 1.5 Pump Foam Sprayer\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam 1.5 pump foam sprayer\u003c\/strong\u003e is a pro-grade sprayer built to lay down dry, long-lasting foam. It's spot-on for car washing, cleaning bikes and plenty of other cleaning and disinfection jobs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh foam quality:\u003c\/strong\u003e gives you thick, clingy foam that stays put.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile use:\u003c\/strong\u003e works with all sorts of chemicals that have surfactant properties.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy handling:\u003c\/strong\u003e ergonomic design with wide filling openings and a clear tank so you can eyeball the level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eEasy to use and comfortable in the hand\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam 1.5\u003c\/strong\u003e wins you over with how easy it is to handle. The big filling opening and ergonomic shape make topping it up a breeze and keep it comfortable through a long session. The clear tank lets you check the level at a glance, so there's no guesswork.\u003c\/p\u003e\n\u003ch3\u003ePlenty of ways to put it to work\u003c\/h3\u003e\n\u003cp\u003eThanks to that high foam quality, the \u003cstrong\u003eiK Foam 1.5\u003c\/strong\u003e is a great fit for all kinds of jobs — washing cars, cleaning bikes or disinfecting food-prep areas. It's made for proper cleaning, because the foam clings for ages and really cuts through the grime.\u003c\/p\u003e\n\u003ch3\u003eSpecs and kit\u003c\/h3\u003e\n\u003cp\u003eFitted with a safety valve set to 3 bar, the \u003cstrong\u003eiK Foam 1.5\u003c\/strong\u003e gives you that bit of extra peace of mind. The adjustable conical nozzle lets you dial the foam in exactly how you need it. The 0.75-litre working capacity is enough for big cleaning jobs without having to top up every five minutes.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"0.75 liters","offer_id":49337399837007,"sku":"D1-IKS-81776","price":25.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-pumpschaumsprueher-ik-foam-15.png?v=1721419408"},{"product_id":"ik-sprayers-ik-foam-pro-2-plus-pumpschaumsprueher-kompressorventil","title":"\"iK Foam\" Pro 2+ (Plus) Pump Foam Sprayer with Compressor Valve (incl. Colour Coding)","description":"\u003ch2\u003eiK Sprayers \"iK Foam\" Pro 2+ (Plus) Pump Foam Sprayer with Compressor Valve\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2+ pump foam sprayer\u003c\/strong\u003e is the tool you reach for when cleaning and disinfecting jobs need to go fast and clean. With its clear tank, universal compressor valve and ergonomic build, this foam sprayer is easy to live with and gets the job done.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThick, lasting foam:\u003c\/strong\u003e lays down dense foam that clings, cutting your cleaning time and pulling more dirt out per pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo ways to pressurise:\u003c\/strong\u003e pump it by hand or hook it up to a compressor — your call, whatever the job needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy upkeep:\u003c\/strong\u003e tool-free assembly and teardown, so cleaning and servicing take seconds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eTop-tier foam for professional cleaning\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2+\u003c\/strong\u003e is a versatile bit of kit built for pro-level cleaning and disinfection. The compressor valve lets you build pressure fast and without fuss, which makes the whole thing far less of a chore. It is right at home on vehicles, industrial plant and HVAC systems.\u003c\/p\u003e\n\u003ch3\u003eEasy to use, easy to run\u003c\/h3\u003e\n\u003cp\u003eThe ergonomic shape of the \u003cstrong\u003eiK Foam Pro 2+\u003c\/strong\u003e sits well in the hand all day. The wide fill opening and the clear tank with level marking make topping up and keeping an eye on the contents a no-brainer. The colour-coded caps add to that — one glance tells you what is in the tank.\u003c\/p\u003e\n\u003ch3\u003eFoam, your way\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 2+\u003c\/strong\u003e ships with three mixing nozzles, so you can tune the foam to the job in front of you. Dry, medium or wet foam — you dial in the cleaning power and stretch the dwell time between product and surface, without soaking everything in the process.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"1.25 liters","offer_id":49396093485391,"sku":"D1-IKS-81678","price":35.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-foam-pro-2-plus-pumpschaumsprueher-kompressorventil.png?v=1722524699"},{"product_id":"ik-sprayers-ik-foam-pro-12-pumpschaumsprueher-kompressorventil-inkl-farbenkennzeichnung","title":"\"iK Foam\" Pro 12 pump foam sprayer with compressor valve","description":"\u003ch2\u003eiK Sprayers \"iK Foam\" Pro 12 — pump foam sprayer with compressor valve\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Foam Pro 12 pump foam sprayer\u003c\/strong\u003e is a heavy-duty unit built specifically to lay down dry, long-lasting foam. It handles a wide range of cleaning jobs in car care, disinfection and general cleaning. With its tough build and a pile of practical features, it's the right tool for pros who use it day in, day out.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDense, long-lasting foam\u003c\/strong\u003e: the sprayer puts out a thick, clinging foam that's spot on for cleaning and disinfection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorks on plenty\u003c\/strong\u003e: good for cleaning vehicles, HVAC systems, bikes and industrial kitchens.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to run and maintain\u003c\/strong\u003e: a clear tank, a big funnel and a park slot for the lance after use keep it dead simple to handle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eStrong cleaning performance\u003c\/h3\u003e\n\u003cp\u003eThanks to the way it builds foam, the \u003cstrong\u003eiK Foam Pro 12\u003c\/strong\u003e keeps your cleaner sitting on the surface longer. You get a deeper clean without soaking everything, which keeps mould and bacteria from taking hold. Swap in different mixers and you can pick light, medium or strong foam to dial in each job.\u003c\/p\u003e\n\u003ch3\u003eTough, well thought-out build\u003c\/h3\u003e\n\u003cp\u003eWith a 10-litre tank and a pressure valve set to 3.5 bar, the \u003cstrong\u003eiK Foam Pro 12\u003c\/strong\u003e gives you plenty of capacity and a safe working pressure. The built-in compressed-air connector makes pressurising easy, while the rugged fibreglass lance and the solid base keep it standing and going for the long haul.\u003c\/p\u003e\n\u003ch3\u003eLoads of uses\u003c\/h3\u003e\n\u003cp\u003eWhether it's car detailing, cleaning processing areas in the food trade or disinfecting public spaces, the \u003cstrong\u003eiK Foam Pro 12\u003c\/strong\u003e earns its keep. The clear tank and the spot to stow the lance safely after use mean top comfort and efficiency for pros.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"6 liters","offer_id":49396133265743,"sku":"D1-IKS-82676","price":131.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-foam-pro-12-pumpschaumsprueher-kompressorventil-inkl-farbenkennzeichnung.png?v=1722524041"},{"product_id":"ik-sprayers-ik-e-foam-pro-12-elektrischer-pumpschaumsprueher-inkl-kompressor","title":"\"iK e Foam\" Pro 12 Electric Pump Foam Sprayer (compressor included)","description":"\u003ch2\u003e\u003cstrong\u003eiK Sprayers \"iK e Foam Pro 12\" — Electric Pump Foam Sprayer (compressor included)\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK e Foam Pro 12\u003c\/strong\u003e is a high-quality electric pump foam sprayer built to lay down dry, long-lasting foam. It's a natural fit for professional cleaning across a range of jobs — vehicle care, cleaning HVAC systems and disinfection work. The\u003cstrong\u003e iK e Foam Pro 12\u003c\/strong\u003e is built tough and runs reliably shift after shift. The 18V lithium-ion battery makes it easy and efficient to handle. With a total capacity of 10 litres and a usable capacity of 6 litres, it has the reach for bigger cleaning jobs too. The built-in compressor and the different foam mixers let you dial in the type of foam — dry, intermediate or wet — to suit the task. And because the tank is transparent, you always know how much you've got left.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile foam output:\u003c\/strong\u003e three different foam mixers let you adjust the foam type (dry, intermediate, wet) for different cleaning needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to handle:\u003c\/strong\u003e the 18V lithium-ion battery and built-in compressor make it light work to run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh capacity:\u003c\/strong\u003e with a usable capacity of 6 litres, it's up to large cleaning jobs as well.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVersatile across the board\u003c\/h3\u003e\n\u003cp\u003eThe iK e Foam Pro 12 is ideal for professional cleaning in all sorts of sectors — vehicle care, industrial maintenance and building disinfection. Thanks to the different foam mixers, you can set the sprayer up for a wide range of cleaning needs.\u003c\/p\u003e\n\u003ch3\u003eBuilt tough, built to last\u003c\/h3\u003e\n\u003cp\u003eThis electric foam sprayer is made from high-grade materials known for standing up to harsh chemicals. The transparent tank makes it easy to keep an eye on the fill level, and the safety valves keep the job safe.\u003c\/p\u003e\n\u003ch3\u003eEasy to service and run\u003c\/h3\u003e\n\u003cp\u003eThe iK e Foam Pro 12 comes apart and goes back together easily, so you can service it without any tools. The battery and compressor are simple to handle and deliver steady performance throughout the job.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"6 liters","offer_id":49396171342159,"sku":"D1-IKS-82678","price":287.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-e-foam-pro-12-elektrischer-pumpschaumspreuher-inkl-kompressor.png?v=1722460778"},{"product_id":"ik-sprayers-ik-e-foam-pro-2-elektrischer-akku-schaumsprueher","title":"\"iK e Foam\" Pro 2 Electric Battery Foam Sprayer (built-in battery compressor)","description":"\u003ch2\u003eElectric Battery Foam Sprayer by iK Sprayers \"iK e Foam\" Pro 2 \u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK Sprayers \"iK e Foam\" Pro 2\u003c\/strong\u003e is an advanced electric foam sprayer built around what car-care enthusiasts actually need. With a strong 7.4V 3200 mAh battery and a built-in compressor, it lays down cleaning foam smoothly and consistently – no more pumping every few minutes! The solid build, the 2-3 bar working pressure and the simple handling make the iK e Foam Pro 2 a must-have for any detailer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in battery compressor\u003c\/strong\u003e: no manual pumping – steady pressure and proper foam.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible foam output\u003c\/strong\u003e: three swappable foam nozzles to dial in the result you want.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt to last\u003c\/strong\u003e: quality materials and safety features for a long working life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eStrong battery for longer sessions\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eiK e Foam Pro 2\u003c\/strong\u003e stands out for its powerful battery, which keeps you going without breaks. On a single charge you can spray up to 8-10 tanks, so even big vehicles get cleaned efficiently. The \u003cstrong\u003ebuilt-in compressor\u003c\/strong\u003e holds a steady pressure that keeps the foam quality high. The sprayer runs at \u003cstrong\u003e2-3 bar\u003c\/strong\u003e, which gives you an even foam blanket that pulls dirt and grime off the surface. \u003cmeta charset=\"utf-8\"\u003eThe LED tells you the current charge at a glance: \u003cstrong\u003egreen\u003c\/strong\u003e (60-100%), \u003cstrong\u003eyellow\u003c\/strong\u003e (30-60%) and \u003cstrong\u003ered\u003c\/strong\u003e (0-30%), so you always know how much runtime you have left.\u003c\/p\u003e\n\u003ch3\u003eProper foam for professional results\u003c\/h3\u003e\n\u003cp\u003eWith the \u003cstrong\u003eiK e Foam Pro 2\u003c\/strong\u003e you get the kind of foam results you normally only see from pro detailers. The \u003cstrong\u003ethree included foam nozzles\u003c\/strong\u003e (orange, grey and green) let you set the foam exactly how you need it. Wet, medium or dry foam – the iK e Foam Pro 2 follows your lead and lets the cleaning foam dwell and work deep into the dirt. The \u003cstrong\u003eclear 1.5-litre tank\u003c\/strong\u003e also keeps the fill level in sight, so you never run dry without warning.\u003c\/p\u003e\n\u003ch3\u003eEasy to use, works just about anywhere\u003c\/h3\u003e\n\u003cp\u003eUsing the \u003cstrong\u003eiK e Foam Pro 2\u003c\/strong\u003e couldn't be simpler, which makes it the ideal tool for anyone who loves detailing. It's ready to go in seconds, and the rechargeable battery means cordless, flexible use. Its \u003cstrong\u003eergonomic design\u003c\/strong\u003e sits comfortably in the hand, even on longer jobs. A real highlight is the \u003cstrong\u003esafety lock\u003c\/strong\u003e that stops accidental triggering. The battery charges quickly and easily over the \u003cstrong\u003eUSB-C port\u003c\/strong\u003e. And if electric operation isn't an option for once, you can also run the sprayer \u003cstrong\u003emanually\u003c\/strong\u003e to stay fully in control of the pressure. Wheels, bodywork or engine bay – the iK e Foam Pro 2 is the perfect battery foam sprayer for a thorough yet gentle clean.\u003c\/p\u003e\n\u003c!----\u003e","brand":"iK Sprayers","offers":[{"title":"1.5 liters","offer_id":49674020749647,"sku":"D1-IKS-81682","price":98.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-e-foam-pro-2-elektrischer-schaumsprueher_1500ml.png?v=1726470933"},{"product_id":"ik-sprayers-ik-foam-pro-2-alk-schaumsprueher-alkalisch","title":"\"iK Foam\" Pro 2 Alk Foam Sprayer (Alkaline)","description":"\u003ch2\u003eAlkaline foam at pro level: iK Sprayers \"iK Foam\" Pro 2 Alk foam sprayer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe iK Sprayers iK Foam Pro 2 Alk is a professional foam sprayer with EPDM seals, built specifically for strongly alkaline foam cleaners, and it lets you lay down a controlled, even, material-safe layer of foam in detailing work.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eiK Sprayers iK Foam Pro 2 Alk\u003c\/strong\u003e is the no-compromise answer to one of the biggest questions in modern detailing: how do you get strongly alkaline foam cleaners onto the car safely, evenly and under control? Where standard foam sprayers hit their limits fast with aggressive chemistry, the Foam Pro 2 Alk is built for exactly that. EPDM seals, a solid pressure system and real foaming make it the tool of choice for proper pre-wash and heavy-duty cleaning.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReal foaming for alkalis:\u003c\/strong\u003e made for alkaline snow foams and pre-cleaners with serious cleaning power.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPDM seals:\u003c\/strong\u003e chemically resistant to strongly alkaline products and far longer-lasting than standard seals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControlled foam coverage:\u003c\/strong\u003e an even blanket of foam instead of stray mist or drips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ealkaline foam sprayer for proper pre-wash and heavy-duty jobs\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ealkaline foam sprayer\u003c\/strong\u003e iK Foam Pro 2 Alk was built specifically for high-pH cleaning chemistry. Alkaline snow foams and pre-cleaners need more than chemical resistance — they need a system that works the foam properly. The Foam Pro 2 Alk lays down a dense, clinging foam that stays put on the panel and gives the cleaner time to dissolve the dirt. In the pre-wash that's exactly what counts: it pulls dirt loose and cuts the risk of wash marks later in the process.\u003c\/p\u003e\n\u003ch3\u003eEPDM seals, foam structure and controlled application\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the iK Foam Pro 2 Alk are its EPDM seals paired with the proven IK foaming system. EPDM is made for alkaline media, so the valves, piston and sealing faces keep working reliably even with regular use of aggressive chemistry. Day-to-day that means steady pressure and consistent foam quality. The foam goes on evenly, doesn't run off straight away and lets you place it where you want — on paint, wheels, plastics or in the engine bay.\u003c\/p\u003e\n\u003ch3\u003eClean results, durability and a clear gap to standard foamers\u003c\/h3\u003e\n\u003cp\u003eThe difference between the iK Foam Pro 2 Alk and run-of-the-mill foam sprayers shows up most in daily use. Where standard foamers lose their seal and their performance fast with alkaline products, the Foam Pro 2 Alk stays tight and dependable. That gets you not just consistent cleaning but a leaner use of chemistry too. For pro detailers it means less downtime, fewer spare units and a foam system that keeps working at pro level — exactly what we expect in high-end detailing.\u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"1.25 liters","offer_id":56928774586703,"sku":"D1-IKS-81686","price":33.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-foam-pro-2-alk-schaumsprueher-alkalisch.png?v=1769731446"},{"product_id":"ik-sprayers-ik-foam-pro-12-alk-schaumsprueher-alkalisch","title":"\"iK Foam\" Pro 12 Alk Foam Sprayer (Alkaline)","description":"\u003ch2\u003eLarge-area alkaline foam with no compromises: iK Sprayers \"iK Foam\" Pro 12 Alk foam sprayer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe iK Sprayers iK Foam Pro 12 Alk is a professional high-volume foam sprayer with EPDM seals, built specifically for strongly alkaline foam cleaners, that lays down an even, clinging foam blanket for intensive pre-wash and pro-grade cleaning.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eiK Sprayers iK Foam Pro 12 Alk\u003c\/strong\u003e is for detailers who treat the pre-wash as a process, not just a step. Big vehicles, high throughput, strong alkaline foam cleaners – this is exactly where the system shines. With its generous tank, no-compromise alkali resistance and proper foam generation, the Foam Pro 12 Alk isn't an accessory but a core working tool for professional detailing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-volume foam sprayer:\u003c\/strong\u003e ideal for SUVs, vans, fleets and series vehicles with minimal interruptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEPDM seals for strong alkalis:\u003c\/strong\u003e permanently resistant to aggressive, high-pH foam cleaners.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEven, clinging foam blanket:\u003c\/strong\u003e spot-on for cutting through dirt before the hand wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ealkaline high-volume foam sprayer for professional pre-wash\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003ealkaline high-volume foam sprayer\u003c\/strong\u003e iK Foam Pro 12 Alk was built for jobs where smaller foamers tap out. The big capacity lets you work long stretches without constant refilling – a real edge during heavy pre-wash or commercial use. Alkaline snow foams need more than chemical resistance; they need enough dwell time too. The foam it lays down clings reliably to the surface and gives the cleaner the time it needs to break down road grime, greasy films and organic deposits.\u003c\/p\u003e\n\u003ch3\u003eEPDM seals, foam quality and steady pressure\u003c\/h3\u003e\n\u003cp\u003eAt the heart of the iK Foam Pro 12 Alk sits the EPDM sealing system, designed for permanent contact with strongly alkaline chemistry. EPDM keeps its shape, stays tight and stays smooth – even under heavy use. Paired with the stable pressure system, you get an even foam with a repeatable structure. The foam is neither too wet nor unstable; it's dialled in so it clings reliably to paint, glass, plastic and wheels. For you that means maximum control over the application and efficient use of your cleaning chemistry.\u003c\/p\u003e\n\u003ch3\u003eEfficiency, durability and a clear gap to standard foamers\u003c\/h3\u003e\n\u003cp\u003eThe difference from ordinary foam sprayers shows up by the first few weeks of daily use at the latest. Where standard units quickly lose their seal on alkaline products or throw uneven foam, the iK Foam Pro 12 Alk stays consistently up to the job. The rugged build, the alkali-proof internals and the even foam generation deliver repeatable results and a markedly longer service life. For professional detailers that's a clear efficiency win: fewer replacements, less downtime and a foam system that keeps working at pro level day in, day out.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"iK Sprayers","offers":[{"title":"6 liters","offer_id":56928779075919,"sku":"D1-IKS-82682","price":149.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/ik-sprayers-ik-foam-pro-12-alk-schaumsprueher-alkalisch.png?v=1769731566"},{"product_id":"solo-cleanline-vario-foam-304-fa-fb-2-liter-schaumsprueher","title":"solo CLEANLine \"VARIOfoam\" (304 FA \/ FB) — 2 Litre Foam Sprayer","description":"\u003ch2\u003eMore control, more dwell time, less stress: solo CLEANLine \"VARIOfoam\" (304 FA \/ FB) — 2 litre foam sprayer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eIf you want to dial in your cleaning foam exactly, the solo CLEANLine VARIOfoam 304 FA\/FB gives you stepless foam-grade adjustment, 3 bar working pressure and a 2-litre tank for even coverage and long dwell time – matched to the pH range of your cleaner.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003esolo CLEANLine \"VARIOfoam\" (304 FA \/ FB) — 2 litre foam sprayer\u003c\/strong\u003e is exactly the tool you grab when \"a bit of foam\" isn't enough and you want dwell time, cling and dosing in your hands like a pro. This is no toy foamer – it's a 2-litre foam pressure sprayer \"Made in Germany\" with patented VARIOfoam tech, 3 bar working pressure and chemical-resistant seals, built for consistent foam output instead of mood-of-the-day foam. And it's not just about how the foam looks, but what it does day-to-day: foam that stays put on vertical panels keeps lifting dirt longer, cuts down on mechanical abrasion (and with it your risk of wash marring) and makes your pre-wash far more controllable.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStepless foam grade, no swapping parts.\u003c\/strong\u003e You set the foam grade right at the nozzle with a dial – dry\/firm through to wetter\/gel-like, even while you work. That's worth its weight in gold, because every cleaner foams differently and every panel \"wants\" foam differently – and you don't have to unscrew a thing to get it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 litres + 3 bar = longer, more even work intervals.\u003c\/strong\u003e On pre-wash, wheels or big panels, nothing's more annoying than constant refilling or foam that collapses after the first few bursts. With a 2 L tank and 3 bar working pressure you get longer intervals and a more stable foam picture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFA or FB to match the pH range – so seals and performance line up.\u003c\/strong\u003e The 304 FA is built for acidic cleaners (pH 1–7), the 304 FB for alkaline cleaners (pH 7–14). That's not red tape, it's materials science: the right seal type stays fit longer when it works inside the chemistry window it was made for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSetting the foam grade: varioFOAM patented tech and flat-jet spray\u003c\/h3\u003e\n\u003cp\u003eThe heart of it is the \u003cstrong\u003evarioFOAM\u003c\/strong\u003e tech: a patented foam-adjustment unit right ahead of the nozzle that lets you fine-tune the foam grade steplessly – exactly where it counts, namely at the outlet. Instead of living with felt inserts, swapping nozzles or \"trial \u0026amp; error\", you turn the dial and see the structure change straight away: from dry and firm (maximum cling, maximum dwell time) to wetter and gel-like (more wetting, faster flow into edges, badges, gaps). It sounds like a gimmick, but day-to-day it's a real process lever: on smooth vertical panels you want the foam set so it doesn't run off straight away but clings for a long time – because that very dwell time does the chemical work and saves you mechanical friction. The maker calls this out as a clear plus: longer-clinging foam improves cleaning action, cuts mechanical cleaning work and can lower cleaner consumption.\u003c\/p\u003e\n\u003cp\u003eOn top of that, output runs through a special flat-jet nozzle: a flat jet spreads the foam more evenly across a surface than a \"spot\" spray pattern, and you get a clean, closed layer faster. That's the whole point with pre-wash and wheels: not \"lots of foam somewhere\", but \"even coverage everywhere\". And because you can adjust the foam grade while you work, you react straight to real life: in shade a product often foams differently than on warm paint; on matte plastics you sometimes want to work a bit wetter, on painted panels firmer; on bug-covered fronts it can be thicker, on big side panels more efficient. That's the difference between \"foam is fun\" and \"foam does the job\".\u003c\/p\u003e\n\u003cp\u003eIf you want to squeeze the most out of it, think of the foam sprayer as a dosing and contact-time tool: you build an even layer first, give it time to work, then rinse clean – instead of compensating right away with mitt and pressure. For us in detailing that's the elegant route: less risk, more repeatability, and in the end paint that looks less \"worked over\". And yes – it sounds obvious, but being able to steer the foam without taking anything apart is exactly what makes you actually do it – rather than getting fed up after the third re-rig and just carrying on \"somehow\".\u003c\/p\u003e\n\u003ch3\u003epH range 1–7 or 7–14: choosing FKM and EPDM seals right\u003c\/h3\u003e\n\u003cp\u003eThe first thing that decides between joy and frustration is this: \u003cstrong\u003epH range\u003c\/strong\u003e matches material. With the solo CLEANLine VARIOfoam you get two versions you pick by chemistry, not by gut feel: the 304 FA is built for acidic cleaners in the pH 1–7 range (FKM seal), the 304 FB for alkaline cleaners pH 7–14 (EPDM seal). That's exactly how it's listed in the technical data, including 3 bar spray pressure and 2 L fill volume.\u003c\/p\u003e\n\u003cp\u003eWhy it matters: a \"seal\" isn't sexy, but it's the part that decides whether a pressure sprayer runs butter-smooth after a few jobs or suddenly gets stiff, weeps or loses pressure. EPDM often goes where water, steam and lots of water-based chemicals are in play; FKM (often known as Viton®) tends to get picked for higher chemical load, temperature or certain media. Day-to-day that doesn't mean \"one is always better\", it means \"one is the right fit\". That's exactly why SOLO splits the versions by pH window: so your tool stays durable and tight inside its intended chemistry range.\u003c\/p\u003e\n\u003cp\u003eFor car detailing it translates simply: if you work a lot with acidic foams (say for mineral deposits or special jobs), grab the FA. If you mostly run alkaline foams\/degreasers (typical for greasy road film, workshop grime, heavy pre-cleaning), grab the FB. And if you're thinking \"I'll just take one and do everything\" – sure, plenty do, but that's exactly where the classic problems show up: foam goes inconsistent, seals age faster, and you've got a pro tool that suddenly feels like a throwaway sprayer. Pick to match, and the system stays stable: fast pressure build-up, repeatable foam picture, fewer surprises.\u003c\/p\u003e\n\u003cp\u003eExtra bonus: the 304 comes with 2 litres as the \"bigger\" generation and, per the product info, replaces the popular smaller 1-litre versions (303 FA\/FB). Meaning: you get the exact same thinking (pH window + foam control), just with more reach per fill – which simply makes sense for vehicle pre-wash and several cars a day.\u003c\/p\u003e\n\u003ch3\u003eVehicle pre-wash, wheel cleaning: results and best practice in detailing\u003c\/h3\u003e\n\u003cp\u003eIf you want to play the \u003cstrong\u003evehicle pre-wash\u003c\/strong\u003e part right, foam isn't a show effect but \"contact time on paint\" – and that's exactly what the solo CLEANLine VARIOfoam (304 FA\/FB) is built for: you lay down a homogeneous foam layer that clings longer on smooth, vertical panels and can therefore work longer. The maker describes it as a clear benefit: longer dwell time improves cleaning action, cuts mechanical cleaning work and can let you use more neutral chemistry; lower aerosol formation is also named as a plus. For us in car care the key point: the more dirt you dissolve chemically and with time, the less you have to \"push away\" later with the wash mitt – and that's exactly the lever against wash marks.\u003c\/p\u003e\n\u003cp\u003eWith wheels the principle is similar, but the surface is more complex: spokes, edges, bolt holes – everywhere the foam can be either too dry (sits nicely but wets poorly) or too wet (runs straight off). Here the varioFOAM adjustment is your trump card: you set it so the foam clings at critical spots but has enough \"wetness\" to creep into the geometry. And because you can re-tune while you work, you adapt: warm wheel vs cold wheel, polished face vs rough casting, light soiling vs baked-on film. You don't have to overdose just because your application is uneven – you make it even.\u003c\/p\u003e\n\u003cp\u003eAnother practical sweet spot: interior and textile surfaces, when you deliberately want to work with foam instead of \"wet soup\". The product info explicitly names moisture-sensitive surfaces like carpets and textile surfaces as a suitable application, because foam holds the moisture more on the surface and \"soaks through\" less. In detailing that's a classic pro move: controlled chemistry on the surface, then take it up\/extract cleanly, rather than flooding everything. Important: here too the setting decides – too dry can reduce wetting, too wet becomes \"water work\" again. Which is exactly why stepless re-tuning is worth so much.\u003c\/p\u003e\n\u003cp\u003eTo get genuinely premium results with the foam sprayer, think about three things – without checklist overload: first, your cleaner has to be foam-capable (sounds obvious, but it's the most common reason for disappointing \"foam\"). Second, even coverage matters more than maximum foam height: a calm, closed film works better than \"peaks and valleys\". Third: let time work for you. Foam is there to extend dwell time; if you panic-rinse after ten seconds, you throw away the whole advantage. And because at Detailing1 we don't just sell but love processes: combine the foamer smartly with your wash routine. After pre-wash you want a really good \u003ca href=\"\/en\/collections\/autoshampoo\"\u003ecar shampoo with high slickness\u003c\/a\u003e, because the remaining dirt then comes off the paint more easily and safely. When you dry after rinsing, a \u003ca href=\"\/en\/collections\/trockentuecher\"\u003ehigh-pile drying towel\u003c\/a\u003e makes the difference, because it soaks up water fast without \"pushing\". And on wheels a \u003ca href=\"\/en\/collections\/felgenreinigung\"\u003ematching wheel cleaner\u003c\/a\u003e plus brush is still the combo that turns \"clean\" into \"detailing-clean\" – with the foam application as your controlled starting point.\u003c\/p\u003e\n\u003cp\u003eBottom line, the solo CLEANLine VARIOfoam 304 isn't just \"a foam sprayer\", it's a tool that gives you process control: foam structure, dwell time and chemistry compatibility are definable instead of random. That's exactly what high-end detailing feels like: you decide the result – not the accessory.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"solo","offers":[{"title":"2 liters \/ Acid (pH 1-7) 304 FA","offer_id":56936685142351,"sku":"D1-SOL-30431","price":26.49,"currency_code":"EUR","in_stock":true},{"title":"2 liters \/ Alkaline (pH 7-14) 304 FB","offer_id":56936685175119,"sku":"D1-SOL-30432","price":26.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-vario-foam-304-fa-2-liter-schaumsprueher.png?v=1769813735"},{"product_id":"solo-cleanline-variofoam-333-fa-4-liter-schaumsprueher","title":"CLEANLine \"VARIOfoam\" (333 FA) 4-Litre Foam Sprayer with Coiled Hose","description":"\u003ch2\u003eMore cling, more control, less hassle: the solo CLEANLine \"VARIOfoam\" (333 FA) as a pro foam sprayer with coiled hose\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe solo CLEANLine „VARIOfoam“ (333 FA) is a 4-litre foam sprayer with 3 bar working pressure and an adjustable varioFOAM nozzle, letting you dial your cleaning foam from dry-and-clingy to gel-like-wet mid-spray – spot on for pre-wash and wheels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003esolo CLEANLine \"VARIOfoam\" (333 FA) — foam sprayer with coiled hose\u003c\/strong\u003e is exactly the tool you want when you don’t just want “some foam” on the pre-wash, but a repeatable, clean layer of foam that actually stays put on vertical panels. The 333 FA is a compact, rugged foamer “made in Germany” with 4.0 litres nominal volume, 3 bar working pressure and chemical-resistant FKM seals – built for proper cleaning foam, not hobby puffing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003evarioFOAM control instead of foam lottery\u003c\/strong\u003e – The dial on the nozzle lets you fine-tune how thick the foam gets, even while you’re spraying. That’s gold when you want to switch between “thick carpet for long dwell time” and “wet foam for quick wetting” – no unscrewing, no refitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 litres of reach for real surface area\u003c\/strong\u003e – With 4.0 L nominal volume, a 1.4 m hose plus a 40 cm wand, you get round the car in comfort, reach the sills and the front end, and work cleanly in passes. On pre-wash and wheels especially, “not refilling every five minutes” is the difference between relaxed and fed up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFKM seals for demanding chemistry\u003c\/strong\u003e – SOLO rates it for foaming, acidic cleaners in the pH 1–7 range; at the same time the 333 FA is listed for neutral as well as strongly acidic and mildly alkaline cleaners. For you that means plenty of headroom – but always dose and test to your chemical maker’s spec.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003ePre-wash foam sprayer with varioFOAM – why the foam consistency is everything in detailing\u003c\/h3\u003e\n\u003cp\u003eFor the pre-wash, what matters isn’t that it turns “white” – it’s how the foam works. At its core it’s about contact time, wetting and controlled run-off: a clingy, drier foam stays longer on paint and plastic, so the surfactants have time to break down road film. A wetter, gel-like foam wets faster and flows more evenly into contours, badges and gaps – perfect when you want to cover ground quickly. This is exactly where \u003cstrong\u003evarioFOAM\u003c\/strong\u003e shows its strength: you turn the dial right on the nozzle and change “dryness” and density mid-spray, without stripping anything down. Day-to-day that’s not just handy, it gets you repeatable results, because you can trim your setup to the product, temperature and how dirty the car is.\u003c\/p\u003e\n\u003cp\u003eOn the technical side that’s genuinely nice for paint safety: when the pre-wash foam clings evenly, you cut the need for mechanical “emergency rubbing” in that first round – the exact moment when grit is still at its most aggressive. That lowers the risk of picking up fine wash marks on the mitt pass that follows, because you’ve already loosened and rinsed off more dirt beforehand. And because the 333 FA works at 3 bar, the foam comes off the nozzle consistently instead of collapsing after the first few bursts. The combo of a 4-litre tank, piston pump and the SOLO special flat-jet nozzle is made to deliver “surface” – bonnet, doors, rear in one clean flow.\u003c\/p\u003e\n\u003cp\u003eIf you run the 333 FA with us as a set with coiled-hose handling, the practical win is simple: less hose spaghetti round the wheels, less tugging on the unit and more control as you work your way round the car. And that control is the difference between “foam on somehow” and “foam on so it works for you.” Fitting with that, our tip from day-to-day: pair the foamer with a proper pre-wash setup, e.g. a matching \u003ca href=\"https:\/\/detailing1.de\/vorwaesche\/\"\u003epre-wash cleaner for road film\u003c\/a\u003e and – if you want it as safe as it gets – a \u003ca href=\"https:\/\/detailing1.de\/waschzubehoer\/\"\u003egentle wash mitt setup\u003c\/a\u003e for the contact wash after.\u003c\/p\u003e\n\u003ch3\u003eWheel cleaning, pH range and FKM seals – how to use the 333 FA cleanly and without harming materials\u003c\/h3\u003e\n\u003cp\u003eOn wheels especially, foam isn’t just show, it’s strategy: brake dust and film like to sit in edges, around wheel bolts and in the barrel. Work there with a well-set foam and the chemistry stays where the action is instead of running straight off. So first things first: \u003cstrong\u003eFKM seals\u003c\/strong\u003e are a real-world plus here, because they’re built for more demanding cleaners. SOLO describes it as suited to foaming, acidic cleaners in the pH 1–7 range; the product info also lists use with neutral, strongly acidic and mildly alkaline cleaners. For you that means you can use the 333 FA very broadly – but you should always dilute the chemistry to spec, not “freehand by feel,” and test on an inconspicuous spot if in doubt.\u003c\/p\u003e\n\u003cp\u003eHere’s what a clean day-to-day routine looks like, without getting lost in a thousand steps: mix your foaming cleaner in the tank, pump up pressure (by hand via the piston pump) and set varioFOAM to “wet” at first, so you get wetting everywhere fast. Then dial to “clingier” once the surface is wet – the foam grips better and dwell time goes up. That switch mid-spray is exactly where the 333 FA shows its pro character: you adjust the foam structure instead of constantly changing your product or your technique. And with a 1.4 m hose plus a 40 cm wand you reach the wheels and the edges of the arches.\u003c\/p\u003e\n\u003cp\u003eIf you’re working in a business (or just like being efficient), the optional compressed-air valve is interesting: it lets you build pressure without hand-pumping – handy for longer stints with a steady spray pattern. SOLO lists this accessory as a compressed-air connection valve with FKM seals and an integrated (automatic) pressure-relief valve. For us it’s the kind of upgrade you don’t “need” – but after the first long Saturday you suddenly can’t do without it.\u003c\/p\u003e\n\u003cp\u003eA fitting combo from our range: for wheels it makes sense to pair the foam with a targeted \u003ca href=\"https:\/\/detailing1.de\/felgenreinigung\/\"\u003ewheel cleaner setup\u003c\/a\u003e and not forget the drying after – a good \u003ca href=\"https:\/\/detailing1.de\/trockentuecher\/\"\u003edrying towel\u003c\/a\u003e stops water spots and gets the finish to “done” faster.\u003c\/p\u003e\n\u003ch3\u003eFoam cling on vertical panels – dwell time, results and the typical mistakes with a foam sprayer\u003c\/h3\u003e\n\u003cp\u003eThe reason we love foam in the first place: on smooth, vertical panels a well-set foam can cling longer and so dwell longer – and that’s exactly what improves the cleaning without you having to reach straight for the brush. The product info spells this out for car cleaning and other vertical, smooth surfaces: more cling means more time for the chemistry, less mechanical work and easier working on sensitive surfaces. That’s not “marketing haze,” it’s simply physics plus chemistry: the more even the foam layer, the more even the surfactant work.\u003c\/p\u003e\n\u003cp\u003eThe typical mistakes nearly always happen in two places: mix and setting. Mixed too thin and it’s “wet, runs straight off” – then you need more product or more mechanical help. Mixed too thick can look spectacular, but doesn’t necessarily clean better, because the wetting suffers and you end up fighting residue. So the varioFOAM setting is your fine-tuning tool: first make sure the surface wets cleanly, then go for more cling when you want contact time. And one more pro note from day-to-day: if the foam layer suddenly “flips” (goes watery all at once), it’s often not the unit but the pressure cushion. Pump it back up or – if you want it comfy – use the compressed-air setup, and the spray pattern stays steadier.\u003c\/p\u003e\n\u003cp\u003eWhat makes the 333 FA so pleasant in our detailing world is its clear focus on foam: 3 bar working pressure, rugged handling and the patented varioFOAM adjustment. That’s not a gimmick, it makes you faster, cleaner and more consistent. And consistent is the real luxury in detailing: same foam layer, same dwell time, same results.\u003c\/p\u003e","brand":"solo","offers":[{"title":"4 liters \/ Acid (pH 1-7) 333 FA","offer_id":56938257285455,"sku":"D1-SOL-33331","price":55.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-variofoam-333-fa-4-liter-schaumsprueher-spiralschlauch_1.png?v=1769851497"},{"product_id":"solo-cleanline-variofoam-309-fa-fb-9-liter-schaumsprueher","title":"CLEANLine \"VARIOfoam\" (309 FA \/ FB) 9 Litre Foam Sprayer","description":"\u003ch2\u003eMaximum foam control: solo CLEANLine \"VARIOfoam\" (309 FA \/ FB) — 9 litre foam sprayer\u003c\/h2\u003e\n\u003cblockquote\u003e\n\u003cp\u003e\u003cem\u003eThe 9 litre solo CLEANLine VARIOfoam foam sprayer builds stable cleaning foam by hand pump and dials infinitely from „dry and clingy“ to „wet and gel-like“ via varioFOAM – spot on for pre-wash, wheels and big panels.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003esolo CLEANLine \"VARIOfoam\" (309 FA \/ FB) — 9 litre foam sprayer\u003c\/strong\u003e is your tool for when you don’t want foam „some way or other“, but exactly the way the surface needs it: clinging, controlled and repeatable. With car care in particular (pre-wash, wheel cleaning) that’s what separates a „foam show“ from real cleaning power – because foam dialled in right sits on the panel longer and gives the cleaner time to do its job. The CLEANLine foamers are built for professional cleaning duty and pair 9 litres of tank volume with 3 bar working pressure and chemical-resistant parts like FKM seals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003evarioFOAM = foam to spec, not foam by luck.\u003c\/strong\u003e A dial right in front of the nozzle lets you set the foaming level infinitely – even while you’re spraying. So you switch in seconds from clingy\/dry (maximum grip) to wetter\/gel-like (more flow), without unscrewing a thing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9 litres + 3 bar, big panels without the grind.\u003c\/strong\u003e The large-volume pump builds working pressure efficiently, lays down a clean foam pattern and keeps you working longer – perfect when you don’t fancy pumping again after every second wing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePro-grade materials for chemistry that means business.\u003c\/strong\u003e A UV-resistant polyethylene tank, an automatic safety-valve safeguard and FKM seals (chemically tough) are built to work with foaming neutral and acidic cleaners – from everyday flash rust and limescale right through to vehicle pre-wash.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eVARIOfoam foam sprayer with infinitely adjustable foaming level for clingy cleaning foam\u003c\/h3\u003e\n\u003cp\u003eWhen foam „doesn’t work“ day-to-day, it’s rarely the cleaner’s fault – usually it’s the wrong foaming level. That’s exactly where \u003cstrong\u003evarioFOAM\u003c\/strong\u003e plays its trump card: you don’t just set the foam roughly once, you fine-tune it as you go. The dial sits right in front of the nozzle so you can tweak the foam character in real time: drier and clingier when you want maximum grip on smooth, vertical panels (read: longer dwell time), or wetter\/gel-like when you need more flow to wet contours, swage lines, badges and awkward nooks evenly.\u003c\/p\u003e\n\u003cp\u003eIn car care that’s worth its weight in gold: on a pre-wash you typically want foam that doesn’t run straight off, so the dirt can loosen before you go in mechanically. That lowers the risk of dragging grit „dry“ across the paint – not because the foam works magic, but because you give it the time to break down the dirt layer. And on wheels? There you often want it a touch „wetter“, so the foam creeps into the spoke beds and wets the surface evenly, instead of just clinging decoratively as a cloud on the outside. That control is exactly the difference between „foam looks good“ and „foam works well“.\u003c\/p\u003e\n\u003cp\u003eWhat matters just as much is what you \u003cem\u003edon’t\u003c\/em\u003e have to do: no unscrewing the nozzle, no conversion, no fiddling. That’s not just convenient, it makes the process repeatable – you find your setting, remember it, and hit it again next time. And because the foam sits on the surface longer when set right, you typically cut down on aggressive scrubbing. The upshot is a workflow that feels more like a pro routine than trial and error.\u003c\/p\u003e\n\u003ch3\u003eVehicle pre-wash and wheel cleaning with 9 litre CLEANLine foamer, 3 bar and FKM seals\u003c\/h3\u003e\n\u003cp\u003eWhat counts day-to-day: how comfortably the unit works across a whole car – and how cleanly you get the chemistry where it needs to act. The 309 FA is built as a large foamer with an extremely tough, UV-resistant polyethylene tank and brings 9 litres of nominal volume. The wide filler opening lets you pour cleaner in easily; a fill-level mark helps you dose without playing „ballpark“. The large-volume pump is built to build a working pressure of 3 bar efficiently. In car care that means an even foam pattern and longer working stretches, without topping up the pressure every few minutes.\u003c\/p\u003e\n\u003cp\u003eThe spray lance on the 309 FA is a 50 cm plastic tube (non-corrosive) and the hose runs 1.4 m – sounds like „small numbers“, but it makes a big difference to handling: you work your way round the front, sills and rear in control, without forcing yourself into awkward angles all the time.\u003c\/p\u003e\n\u003cp\u003eOn chemical compatibility, without the marketing fog: the system suits foaming neutral and acidic cleaners and is described, among other things, for limescale residue\/urine stone, flash rust and laying down acidic cleaning foams; on top of that, suitability for car care, vehicle pre-wash and wheel cleaning is named explicitly. The technical heart of it is the chemical-resistant components – the FKM seals in particular – plus a nozzle setup built for foam delivery (a special flat-jet nozzle).\u003c\/p\u003e\n\u003cp\u003eWhat does that mean for you in the detailing day-to-day? You can build your pre-wash so the foam doesn’t just „sit on top“, but wets the surface evenly and clings. After that you carry on – depending on your setup with a pressure washer, rinseless pre-soak or hand wash. And when you tackle big surfaces (shop, fleet, campers, off-road rigs) you’ll love the optional accessory options: there’s a wheel set with a handle so you can roll it instead of lugging it, and a compressed-air valve to build the pressure externally – both are provided as optional accessories. Translation: less hauling, more rhythm in the workflow.\u003c\/p\u003e\n\u003ch3\u003eCleaning foam on vertical surfaces: dwell time, cleaning power and typical use cases\u003c\/h3\u003e\n\u003cp\u003eA good foamer is at heart a „time manager“ for chemistry. The decisive lever is dwell time: on smooth, vertical surfaces a foam that’s too wet runs straight off – the active ingredients are gone before they work. An optimally set, clingy foam holds on longer, can dwell longer and so improves cleaning power. The product description addresses exactly this benefit: longer cling, better performance and less mechanical cleaning work.\u003c\/p\u003e\n\u003cp\u003eTypical use cases aren’t just paint and wheels, but anything that benefits from controlled, clinging foam: sill areas, door entries, door shuts (dosed carefully), plastic add-on parts – and textile surfaces and carpets are named as suitable too. Which brings us to the next practical point: a clean foam application usually also means less needless overspray in the room, because you’re not „working into the air“ with the finest mist, but with foam that goes where you need it.\u003c\/p\u003e\n\u003cp\u003eWhat many underrate: the combination of 9 litre volume, 3 bar working pressure and infinitely variable foam control doesn’t just make the system „stronger“, but above all more consistent. Consistency is quality in detailing: you want your foam to react on the first panel just like it does on the last. That cuts mistakes (too short a dwell time, too wet an application, too much product), saves the nerves and delivers repeatable results.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"solo","offers":[{"title":"9 liters \/ Acid (pH 1-7) 309 FA","offer_id":56938291790159,"sku":"D1-SOL-30931","price":76.49,"currency_code":"EUR","in_stock":true},{"title":"9 liters \/ Alkaline (pH 7-14) 309 FB","offer_id":56938291757391,"sku":"D1-SOL-30932","price":95.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/solo-cleanline-variofoam-309-fb-9-liter-schaumsprueher.png?v=1769852728"},{"product_id":"sonax-profiline-powerfoamer-schaumzerstauber","title":"PROFILINE PowerFoamer Foam Atomiser","description":"\u003ch2\u003eCompressed-air foam for a professional pre-wash — SONAX PROFILINE PowerFoamer\u003c\/h2\u003e\n\n\u003cblockquote\u003e\n  \u003cp\u003e\u003cem\u003eWhat do the pros use the PowerFoamer for? SONAX's compressed-air foam atomiser runs off your compressor and lays active foam across the whole car for the pre-wash — it coats the panels with concentrated cleaning foam and lets you loosen dirt gently, with barely any contact, before you ever touch the paint.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003cp\u003eA proper wash doesn't start with the wash mitt — it starts with foam. In modern detailing businesses and car-wash setups, the low-contact pre-wash is a fixed part of the routine: active foam goes onto the dirty paint, pulls off grime, road film and organic residue without any mechanical contact — and cuts the risk of wash marks and holograms right down. The \u003cstrong\u003eSONAX PROFILINE PowerFoamer\u003c\/strong\u003e is the pro tool for that step: compressor-driven, high foam output, and built for all-day use in a busy operation.\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCompressed-air operation for even foam without a hand pump.\u003c\/strong\u003e Unlike hand-pumped foam sprayers, the PowerFoamer works off compressed air from your compressor. That gives you steady, stable foam from the first car to the last — no drop-off in pressure as a hand pump tires out. For shops washing a lot of cars every day, the air-driven version is far more efficient and a lot easier on the wrists than manual pumping.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWide foam coverage to cover a car fast.\u003c\/strong\u003e The PowerFoamer system lets you blanket a whole car in active foam in no time. The foam nozzle puts down a dense, clinging foam that doesn't run straight off vertical panels (doors, wings) — it sits there long enough to work the dirt loose. That cling is one of the things that separates a proper pro foam system from the rest.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e3-piece set — ready to go straight into pro use.\u003c\/strong\u003e The PROFILINE PowerFoamer set comes with the pressure vessel, the foam-generator head and the lance system for different jobs. The 3-piece layout lets you adapt to whatever you're cleaning — from full-panel foam coverage to a targeted foam shot into spots that are hard to reach.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eThe low-contact pre-wash with active foam has come a long way in pro detailing over the last few years. Once you're switched on to the holograms, sanding marks and micro-scratches that careless contact washing leaves behind, you start rethinking the whole wash. The upshot: a two-stage process — low-contact pre-wash, then contact wash — has settled in as the standard. The PowerFoamer is the tool that nails that first step, cleanly and quickly.\u003c\/p\u003e\n\n\u003cp\u003eThe gap between foam off a PowerFoamer and foam from a simple spray bottle is obvious the moment you see it: the PowerFoamer puts down a creamy, stable foam with real cling that lays evenly across the panel. Spray-bottle foam is watery, runs off faster and gets far less dwell time on vertical surfaces. For proper results on an active-foam pre-wash, the difference in foam quality and dwell efficiency is huge.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cblockquote class=\"praxistipp\"\u003e\n  \u003cp\u003e\u003cstrong\u003eDay-to-day from Detailing1:\u003c\/strong\u003e For the best foam, mix your concentrate at roughly 1:10 to 1:20 in the vessel, depending on how thick and how aggressive you want it. SONAX PROFILINE ActiFoam Energy as the active-foam concentrate is dialled in for the PowerFoamer system: the foam clings well on vertical panels and has enough cleaning power for medium to heavy road grime. Let it dwell for 3–5 minutes, then rinse it all off with a pressure washer — and only then do you go in with the contact wash. The principle: foam loosens, the pressure washer takes it away, the mitt just finishes off.\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\n\u003chr\u003e\n\n\u003ch3\u003eCompressed-air tech in the PROFILINE foam atomiser — foam quality and build\u003c\/h3\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eSONAX PROFILINE PowerFoamer\u003c\/strong\u003e uses compressed air from a compressor to whip cleaning concentrate and water into a stable foam. It's the same idea as a pro kitchen's whipped-cream siphon: force a gas (air) into a liquid under pressure and you get a stable foam or cream. On a foam atomiser for car washing, that gives you a dense, creamy active foam that clings well and stays put on the panel for a good while.\u003c\/p\u003e\n\n\u003cp\u003eThe foam-generator head sets the consistency: different nozzle settings let you switch between a finer, clingy high-foam and a coarser, more aggressive wet foam. Fine high-foam suits delicate surfaces and freshly sealed cars; coarse wet foam is the one for filthy cars with stubborn road-film build-up. That flexibility on foam consistency is something simple hand-pump foam sprayers just don't give you.\u003c\/p\u003e\n\n\u003cp\u003eThe PowerFoamer's pressure vessel is made from a hard-wearing material that stands up to solvent-based cleaning concentrates. In day-to-day pro use, foam atomisers get filled with all sorts of concentrates — a vessel that gets eaten away by harsh cleaners, or starts leaking, is a safety and efficiency risk. SONAX builds the PROFILINE accessories to pro standard for daily, non-stop use.\u003c\/p\u003e\n\n\u003cp\u003eYou hook the PowerFoamer up to a compressor through standard compressed-air fittings, the kind already sitting in any pro workshop or detailing operation. Working pressure sits in the usual compressor range of 4–8 bar — no special kit needed. That makes moving over to an air-driven foam system painless for anyone already running a compressor.\u003c\/p\u003e\n\n\u003ch3\u003eUsing the PowerFoamer — the workflow in a pro wash\u003c\/h3\u003e\n\n\u003cp\u003eWhen you set up the foam generator, the air-to-liquid ratio is what makes or breaks it: too much air gives you a dry, unstable foam that collapses fast and barely clings. Too little air gives you a wet, heavy foam that runs straight off. The sweet spot is in the middle: a creamy foam that holds on vertical panels for at least 3–4 minutes. Where that sits depends on the concentrate you're using and your water hardness, so you dial it in once for your own setup.\u003c\/p\u003e\n\n\u003cp\u003eRunning the PowerFoamer follows a clear sequence: fill the vessel with concentrate and water, connect the air, lay down the foam, let it dwell, rinse off. The whole foam pre-wash step takes between 5 and 15 minutes depending on the size of the car — time you get back through less mechanical work later in the hand-wash step. Less dirt on the paint when the mitt hits it means less scratch risk.\u003c\/p\u003e\n\n\u003cp\u003eIf you've got a lot of cars going through, it's worth getting a few vessels so one can be filling while the other's in use. The PowerFoamer is quick to clean between vessel swaps: a few pulls of foam with clean water flushes the residue out of the system. A deeper clean at the end of the day with a rinse-through stops shampoo residue building up in the nozzles.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"\/en\/products\/sonax-profiline-actifoam-energy-reinigungsschaum\"\u003eSONAX PROFILINE ActiFoam \"Energy\"\u003c\/a\u003e is the concentrate to pair with the PowerFoamer: the formula is built to break dirt down fast on a short dwell, and with the PowerFoamer system it puts out a stable, clinging high-foam. You can adjust the dose to how dirty the car is — lighter concentration on a lightly soiled car, a heavier dose on a filthy one.\u003c\/p\u003e\n\n\u003ch3\u003eWhere the PowerFoamer earns its keep — detailing, dealerships and car washes\u003c\/h3\u003e\n\n\u003cp\u003eThe pro foam system is built mainly for commercial use, where a lot of cars get pre-washed every day. In detailing businesses the foam pre-wash is a standard step that takes a real chunk out of the scratch risk during the contact wash. At dealerships prepping new and nearly-new cars, the low-contact pre-wash protects the paint quality of the cars going out the door.\u003c\/p\u003e\n\n\u003cp\u003eFor private detailing enthusiasts with a compressor, the PowerFoamer is a pro-grade alternative to garden-hose foam attachments or hand-pumped foam sprayers. The foam quality is far higher, the dwell time longer, and it's a lot kinder on the wrists than the hand-pump versions. If you want pro-level results on your own car, the PowerFoamer is the compressor accessory that gets you there.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"\/en\/products\/sonax-profiline-foamsprayer-schaumspruher\"\u003eSONAX PROFILINE FoamSprayer\u003c\/a\u003e is the option for shops or private users without a compressed-air supply: the FoamSprayer runs off a built-in pressure pump and gives you similar foam quality, just on manual pumping. To get started, or for the odd job, the FoamSprayer is the more accessible pick — for daily pro use the PowerFoamer is more efficient and easier on the body.\u003c\/p\u003e\n\n\u003ch3\u003eThe PROFILINE PowerFoamer compared — air vs hand pump and foam systems\u003c\/h3\u003e\n\n\u003cp\u003ePut the air-driven PowerFoamer head to head with a hand-pumped foam sprayer and the difference shows up mostly over a full day: on one car it's marginal — on ten cars a day, the PowerFoamer's ergonomics and its steady foam quality are what count. A hand pump tires out, the pressure fades, the foam quality drops off as the day goes on. The PowerFoamer puts out the same foam on the last car as it did on the first.\u003c\/p\u003e\n\n\u003cp\u003eAgainst pro foam lances for pressure washers, the PowerFoamer is a different category of kit: high-pressure foam lances use the pressure washer's water pressure to make the foam. The foam those systems make is often less stable and less clingy than the air-driven PowerFoamer's. On top of that, high-pressure foam lances only work tied to a pressure washer — the PowerFoamer stands on its own and works as your only foam system.\u003c\/p\u003e\n\n\u003cp\u003eFor shops that need both a \u003ca href=\"\/en\/products\/sonax-profiline-druckpumpzerstauber-fur-losemittel-spruhflasche\"\u003ePROFILINE DruckpumpZerstäuber\u003c\/a\u003e for specialist cleaners and a foam system for the pre-wash, SONAX has both categories in the PROFILINE range. The DruckpumpZerstäuber handles the targeted, single-spot job; the PowerFoamer takes on the wide-area foam. The two cover each other in a pro cleaning workflow.\u003c\/p\u003e\n\n\u003ch3\u003eBuy the SONAX PROFILINE PowerFoamer — for pro shops and serious enthusiasts\u003c\/h3\u003e\n\n\u003cp\u003eThe PROFILINE PowerFoamer is aimed at pro detailing businesses, dealerships and detailing studios after a quality foam answer for the low-contact pre-wash. The 3-piece set gives you a ready-to-go complete kit with nothing else to buy.\u003c\/p\u003e\n\n\u003cp\u003eFor shops working the premium end of detailing, the PowerFoamer is also a talking point with the customer: a car that gets a compressed-air foam pre-wash before the mitt ever touches it signals you know what you're doing. Customers who get why the foam pre-wash matters value that step — and they'll pay for that kind of care. So the PowerFoamer isn't just a tool, it's a quality signal in the conversation with the customer.\u003c\/p\u003e\n\n\u003cp\u003eThe money you put into the PowerFoamer pays itself back over time through fewer scratch repairs and shorter wash times per car: when the pre-wash gets the dirt off properly, the hand-wash step needs less pressure and fewer passes. That saves working time and looks after both the customers' paint and the shop's own tools. For businesses pitching quality as a selling point, pro foam kit is a visible signal to the customer: this is a job done with a system.\u003c\/p\u003e","brand":"SONAX","offers":[{"title":"3 parts","offer_id":57345160085839,"sku":"D1-SNX-4962050","price":70.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/sonax-profiline-powerfoamer_3-teile.png?v=1774736655"},{"product_id":"koch-chemie-pressure-sprayer-foam-schaumsprueher","title":"Pressure Sprayer \"Foam\" Foam sprayer","description":"","brand":"Koch-Chemie","offers":[{"title":"2 litres","offer_id":58702898004303,"sku":"D1-KCX-9998283","price":52.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/3272\/7375\/files\/koch-chemie-pressure-sprayer-foam-schaumsprueher.png?v=1788816570"}],"url":"https:\/\/detailing1.be\/en\/collections\/pumpschaumsprueher.oembed?page=2","provider":"Detailing1","version":"1.0","type":"link"}