SONAX PROFILINE OS "02-06" High Gloss Polish with Sealant (One-Step) 250ml

High Gloss and Sealant in One Step — SONAX PROFILINE OS 02-06

What does SONAX PROFILINE OS 02-06 do? This one-step polish combines fine paint correction with an integrated protective sealant – for high gloss, light swirl removal, and immediate paint protection in a single step, ideal for maintenance detailing and time-efficient detailing workflows.

In everyday detailing, there are situations where an elaborate multi-stage polishing process is neither necessary nor economical: new car detailing with minimal swirl marks, regular maintenance detailing on well-maintained vehicles, or fleet detailing with tight time constraints. The SONAX PROFILINE OS 02-06 was developed for precisely these scenarios: a professional one-step polish that, in a single step, evens out light polishing marks and swirl marks while simultaneously building up a protective sealant layer. The result: high gloss and paint protection without a separate sealing step.

• One-Step Technology: Correction and sealing simultaneously. Conventional polishing processes separate paint correction and sealing into separate steps – first polish, then degrease with a panel wipe, then seal. The OS 02-06 combines these steps through a hybrid formula: fine abrasive particles correct minor surface imperfections during polishing, and the integrated sealing polymer forms a protective layer on the freshly smoothed clear coat. Three steps are reduced to one – without compromising the gloss result on suitable vehicles.
• Fine abrasion for light swirl marks and polishing marks. The abrasiveness of the OS 02-06 is positioned in the middle of the SONAX product scale with “02-06”: fine enough for final polishing steps and one-step applications, yet effective enough to remove light to medium swirl marks. On well-conditioned paints (e.g., hard factory clear coats, newer soft paints in good condition), the OS 02-06 produces a result that is ready for sealing without further processing.
• Integrated sealant protection directly after polishing. The polymer additive in the one-step formula forms a thin, even protective layer on the clear coat after polishing. This layer increases hydrophobicity, slightly improves the gloss effect, and provides initial protection against moisture, dirt, and UV radiation. The protection is not as durable as a dedicated ceramic or polymer sealant, but it is sufficient for vehicles with short detailing intervals or as a first protective layer after basic preparation.

Practical tip from Detailing1: The OS 02-06 achieves its best results with a combination pad (medium-hard foam pads or combination microfiber pads), which effectively transfers the fine abrasive particles and simultaneously distributes the sealing polymer evenly on the surface. For rotary polishers, set the machine speed to 4–5 for the correction phase, and reduce it to 2–3 for the final finishing pass to evenly polish out the sealing polymer. Important: If a full ceramic coating is to be applied after the OS 02-06, first degrease with SONAX PROFILINE Prepare – the sealing polymer of the OS 02-06 must be removed before a new coating to avoid compromising adhesion. For vehicles treated only with the OS 02-06, this step is not necessary.

One-Step Polish Technology — Correction and Sealant Combined in One Formula

The technical uniqueness of the SONAX PROFILINE OS 02-06 lies in combining two normally incompatible functions in one formula: abrasive polishing and protective layer build-up. For a pure correction polish, it is important that the formula contains no waxy or polymeric components that would get between the abrasive particles and the paint surface and reduce the polishing effect. For a pure sealant, on the other hand, no abrasion should be present that would immediately destroy the freshly applied protective layer. The OS 02-06 resolves this contradiction through specifically matched particle sizes and an optimized formulation approach.

The finely ground abrasive particles of the OS 02-06 are dimensioned to exert their corrective action during the active polishing phase (when the pad is guided over the surface with pressure and speed). When the polish is buffed out (less pressure, lower speed), the remaining polymer components of the formula lay down a uniform film on the cleaned surface. This sequential principle – first abrasion, then protective layer formation – enables the combination of both functions in one product without them interfering with each other.

The sealing component of the OS 02-06 is designed as short-term protection that lasts for several months but is not comparable to a full polymer or ceramic coating. For vehicles that are regularly detailed (every 3–6 months) and where durable protection via ceramic coating is not the goal, this level of protection is sufficient. For vehicles where maximum sealant durability is the goal, the two-step approach (OS 02-06 or SONAX PROFILINE NP 03-06 for polishing, then panel wipe and dedicated sealant) remains the first choice.

Applying OS 02-06 Correctly — Pad Selection, Machine, and Workflow

Optimal application of the one-step polish begins with pad selection: For the OS 02-06, combination pads or slightly abrasive foam pads are recommended, as they effectively support the correction component and evenly distribute the sealing component. Pure finishing pads (very soft pads without inherent abrasion) significantly reduce the corrective performance of the OS 02-06 – if the focus is on swirl removal, a combination pad is the better choice. Very hard or abrasive pads, on the other hand, increase corrective performance but can over-work the sealing polymer and produce an uneven result.

Machine guidance: Begin one-step polishing at medium speed (4–5 on an eccentric polisher) and normal polishing pressure. First, spread the polish on the pad, then guide it over the surface with overlapping passes – typically 2–3 passes for complete swirl removal. For the final pass, reduce speed and pressure to finally and evenly polish the sealing polymer into the paint surface. The wipe-off step with a clean microfiber towel should occur when the polish on the paint transitions to a whitish-matte phase – this is the optimal time to wipe off the sealing component.

Important for results control: After polishing, check the area under angled artificial light for remaining swirl marks. The OS 02-06 completely removes light swirl marks and significantly reduces medium swirl marks – deep scratches and heavy holograms will remain visible with a one-step polish and require a multi-stage process with a more aggressive correction step. One-step polish is not a substitute for multi-stage correction on heavily damaged paints, but rather the right tool for paints where the degree of damage does not require deeper correction.

Application Areas of OS 02-06 — When One-Step Polish is the Right Choice

The SONAX PROFILINE OS 02-06 optimally covers several typical detailing scenarios in professional detailing operations. New vehicle preparation: New vehicles arrive with manufacturing-related transport protection residues and fine holograms from factory polishing, but without deeper swirl marks or scratches. The OS 02-06 removes these fine surface imperfections in one step and leaves the paint ready for sealing – an economical and time-efficient solution for new vehicle preparation before delivery.

Maintenance preparation and regular care: Vehicles that are detailed every few months and have only accumulated light, everyday swirl marks benefit from the one-step efficiency of the OS 02-06. Instead of polishing the surface first, then degreasing, and then sealing, everything is done in one pass. For businesses with high vehicle throughput, this means significant time savings per vehicle – with consistently good results.

Dealer preparation and stock vehicles: Used car dealerships and lease returns with manageable paint damage (everyday scratches, light swirls from washing) are a classic application area. The OS 02-06 enables quick, qualitatively convincing preparation that makes the vehicle significantly more attractive for sale, without requiring the time investment of a full multi-stage preparation. The sealing polymer in the OS 02-06 also protects the paint from environmental influences during storage.

OS 02-06 in Comparison — One-Step vs. Multi-Stage Polish and OS 04-05

In the SONAX PROFILINE range, there are two one-step polishes for different requirements. The SONAX PROFILINE OS 04-05 is the more aggressive one-step polish with a higher abrasive grade (04-05 on the SONAX scale) – it is designed for paints with medium to heavier swirl marks where the OS 02-06 does not provide sufficient correction. The OS 04-05 does not contain an integrated sealing component and is positioned as a pure correction product that subsequently requires a separate sealing step. The choice between the two depends on the extent of paint damage: light swirls and maintenance detailing → OS 02-06; medium to heavier swirls → OS 04-05 followed by a separate sealant.

Compared to multi-stage polishing (heavy correction stage + finishing polish + panel wipe + sealant), the one-step polish naturally falls short on heavily damaged paints: it cannot remove deep scratches that require a heavy polishing stage, and the integrated sealant protection is not as durable as a dedicated ceramic coating. For vehicles with this level of damage, we recommend the multi-stage process with the NP 03-06 as the finishing polish. The advantage of the OS 02-06 lies in time savings and efficiency for low to medium-low damage levels – used on the right vehicle, it delivers a professional result that impresses customers.

For detailers who want to cover both scenarios, we recommend the OS 02-06 as the standard one-step for the majority of incoming vehicles (which are in normal condition) and the OS 04-05 as a reserve for more heavily damaged paints. This two-tier polishing workflow, based on the degree of damage, is a professional approach that maximizes both result quality and operational efficiency.

Purchasing SONAX PROFILINE OS 02-06 — Sizes and Recommendation

The SONAX PROFILINE OS 02-06 is available in 250 ml and 1 liter sizes, as well as in 2-pack and 3-pack sets. The 250 ml container is ideal for beginners who want to get to know the product, or for use on small areas (individual panels, hood, roof). The 1-liter container is the most economical choice for regular users and professional businesses – approximately 15–25 ml are needed per vehicle application, depending on pad size and vehicle size, so one liter is sufficient for approximately 40–65 complete vehicle applications.

The OS 02-06 is particularly recommended for businesses that offer high-quality, time-efficient detailing as a standard service and want to rely on a product that combines correction and protection. For car washes and quick detailing services with limited time, the one-step formula is economically attractive. Even for private users who maintain their vehicles themselves and are looking for a simple process without a stack of chemicals, the OS 02-06 is an uncomplicated solution for a complete detailing in one step.

In summary, the SONAX PROFILINE OS 02-06 is the optimal tool for all situations where time and efficiency matter, without compromising paint correction and protection. Anyone who wants to combine professional gloss and immediate paint protection on a vehicle with a good initial condition will find the most effective solution in the OS 02-06 from the SONAX PROFILINE polishing range.