GYEON Q²M Foam Foam Cleaner 1000ml

Contactless Pre-Wash for Safe Washing – GYEON Q²M Foam

What is GYEON Q²M Foam? GYEON Q²M Foam is a highly concentrated foam cleaner (snow foam) for foam cannons – it is applied before the actual hand wash, adheres to the paint, dissolves coarse dirt, and significantly reduces the risk of scratches during subsequent washing.

The first step in any professional paint wash is contactless: GYEON Q²M Foam envelops the vehicle in a dense foam before hand washing, softening and loosening coarse dirt from the surface – without mechanical contact. Only when the coarse dirt has been loosened by the foam is the wash mitt used. This significantly reduces the risk of scratches, as most micro-scratches are caused by dirt particles being dragged across the paint during washing.

• Dense, adhesive foam consistency for long dwell time. Q²M Foam forms a dense, creamy foam that adheres to the paint and doesn't run off immediately. This dwell time is crucial – the longer the foam stays on the paint, the more dirt is dissolved. Less dirt during hand washing means less scratch risk.
• Coating-friendly formulation – does not attack sealants. Q²M Foam is adjusted to a pH-neutral to slightly alkaline range, which cleans effectively but does not degrade ceramic coatings and polymer sealants. On coated vehicles, Q²M Foam can be used as a regular pre-wash without risk.
• Effective dirt removal as a pre-wash reduces effort during hand washing. After a complete foam application, most of the road dirt is already dissolved. The subsequent hand wash with Q²M Bathe or Q²M Bathe+ is safer and easier – less pressure needed, less scratch risk.

Practical Tip from Detailing1: Apply Q²M Foam with a foam cannon attached to a pressure washer – this creates the optimal foam consistency. Dilute approximately 1:10 with water in the foam cannon. Apply foam evenly from bottom to top (not top to bottom – this way it stays on the surface longer), then let it dwell for 3–5 minutes. Rinse with a pressure washer and immediately follow with a hand wash using Q²M Bathe.

Snow Foam in the Professional Washing Routine: Why it's Indispensable

In professional vehicle care, contactless pre-washing is standard – for good reason: Most fine paint scratches are not caused by incorrect polishing or coatings, but by everyday vehicle washing. When dirt particles are mechanically dragged across the paint during hand washing, they create scratches in the clear coat – the classic wash scratches or swirls. Q²M Foam addresses the problem at its root: dirt is first chemically loosened before being mechanically removed. The result is a demonstrably more scratch-sparing washing process.

Q²M Foam and the Two-Bucket Wash

The optimal washing program with Q²M Foam: Phase 1 (contactless) – high-pressure pre-rinse → foam Q²M Foam → let dwell for 3–5 minutes → high-pressure rinse. Phase 2 (contact wash) – Q²M Bathe or Q²M Bathe+ in two buckets (dirt and clean water buckets), soft wash mitt, wash from top to bottom → rinse thoroughly → dry. Optional Phase 3 (sealant) – refresh with Q²M WetCoat on the wet vehicle, or after drying with Q²M CeramicDetailer.

Foam on Various Vehicle Types and Situations

Q²M Foam is suitable for all vehicle types – from small cars to vans. For vehicles with matte paint, we recommend a shorter dwell time (2–3 minutes) and subsequent specific matte care products. For heavily soiled vehicles (after off-roading or bad weather use), Q²M Foam can be used less diluted (1:5) for higher cleaning performance. For lightly soiled vehicles with a coating, the foam phase alone may be sufficient if the pressure washer is used for a vigorous rinse afterwards.

Foam + WetCoat: The Combination for Quick Washing with Protection

For particularly efficient washing, we recommend combining Q²M Foam (pre-wash) with Q²M WetCoat (wet sealant): After rinsing off the foam, spray Q²M WetCoat onto the still-wet vehicle, let it dwell briefly, and rinse off. The vehicle is then cleaned and simultaneously freshly sealed – all in one process that takes 20–30 minutes.

Purchase Recommendation: Q²M Foam for the Professional Washing Routine

GYEON Q²M Foam is the indispensable first link in any professional car wash. Anyone who truly wants to protect their paint always starts with a contactless pre-wash. The complete wash set: Q²M Foam as a pre-wash, Q²M Bug&Grime for insects, Q²M Bathe+ for hand washing, and Q²M WetCoat for the final wet sealant.