SONAX PROFILINE PlasticCare Plastic Care 1000ml

Regenerate and Permanently Protect Plastic with SONAX PROFILINE PlasticCare

What does SONAX PROFILINE PlasticCare do? The solvent-free plastic care product refreshes faded colors, conceals dullness and superficial scratches, and preserves all plastic parts in the vehicle's interior and exterior — including engine compartment preservation directly after washing.

Faded plastic trims, dull dashboards, and grayed engine compartment covers are among the most common problems detailers face daily. What many don't know: Most silicone-based plastic care products may create short-term shine, but they attract dust, leave sticky surfaces, and offer no real protection. SONAX PROFILINE PlasticCare takes a different approach — as a solvent-free, regenerating plastic care product, it refreshes colors, conceals dullness and scratches, and applies a protective preservation layer to the plastic without creating an obtrusive high-gloss look. The result is a subtle, natural shine that resembles a factory-new appearance and sells much better to customers than a greasy, shiny dashboard. Available in three container sizes — 1 liter, 5 liters, and 25 liters — PlasticCare meets the needs of small individual businesses to large detailing chains.

• Color refreshment with a subtle, natural shine. Black and dark gray plastic parts appear rich and vibrant after treatment, without an artificial gloss. The subtle shine typical of SONAX is created by a thin preservation layer that reflects light evenly, rather than mirroring it like a silicone layer. This is particularly crucial for high-end vehicles, where excessive shine on the dashboard can be perceived as cheap and irritates demanding customers.
• Solvent-free — safe for all plastic types. The formula does not attack painted or unpainted plastics and is suitable for the entire vehicle interior. Unlike solvent-based alternatives, PlasticCare does not dry out the plastic or make it brittle. This is a crucial difference in the long run: While solvents remove superficial dirt, they also extract plasticizers from the material — the opposite of genuine, sustainable care.
• Engine compartment preservation in one step. Sprayed directly after engine washing, PlasticCare preserves all plastic covers and cable insulation in the engine compartment. The surfaces are protected and given a well-maintained appearance that makes all the difference in vehicle inspections and used car sales. No separate engine compartment product is needed — PlasticCare handles this important task as well.

Practical tip from Detailing1: For optimal results, fill PlasticCare into a SONAX Sprayboy and dilute with water up to 1:2, depending on the desired gloss level. Less concentrate results in a duller, more natural look — ideal for dashboards and center consoles, where high gloss can cause glare. For the engine compartment, use PlasticCare undiluted, directly after engine washing and after blowing off excess water in recesses and on the ignition system with compressed air.

Plastic Care without Solvents — Why It Makes a Difference

The market for plastic care products is confusing, and many products promise more than they deliver. Most inexpensive cockpit sprays and plastic care products rely on silicone oils and solvents as a base. The silicone oil provides immediate shine, and the solvent helps with quick absorption. The problem: Silicone oils form a film on the surface and attract dust like a magnet. After a few days, the treated dashboard looks dustier than before. Solvents, on the other hand, attack the plasticizers in the plastic in the long term — precisely the substances that keep the plastic supple and color-intensive.

SONAX PROFILINE PlasticCare works without solvents and instead uses a regenerating combination of active ingredients that penetrates the upper plastic layer, revives faded pigments, and forms a thin protective layer. This layer is not sticky, hardly attracts dust, and does not create an unnatural shine. The effect lasts significantly longer than with silicone products because the active ingredients do not simply remain on the surface and disappear with the next wipe, but actually regenerate the uppermost material layers.

In the daily practice of a detailing business, this difference is particularly evident in two areas: Firstly, the treated surface remains clean for significantly longer because no silicone film binds particles. Secondly, PlasticCare can be easily reworked — if the customer returns after weeks, a new application adheres perfectly without layers building up or residues needing to be removed. With silicone-based products, however, the old layer often has to be cleaned off before fresh care can be applied — a step that costs time and must be done with solvent-based cleaners, which in turn stress the plastic.

Another advantage of the solvent-free formula is evident in handling sensitive plastics: High-quality vehicles are increasingly using soft-coated surfaces in the interior — so-called soft-touch plastics, which feel pleasant but are extremely sensitive to solvents. Even a single contact with aggressive care products can lead to permanent sticky spots or abrasion of the soft-touch coating on these surfaces. PlasticCare is safe for these delicate surfaces and cares for them without attacking the coating — an aspect that is particularly relevant when detailing premium vehicles.

Plastic Refurbishment — Application in the Interior and on Exterior Parts

The application of PlasticCare is deliberately kept simple to function quickly and efficiently in everyday business. For the interior, fill the product into a Sprayboy, spray it onto a soft microfiber care pad, and spread it evenly on the plastic. Do not spray directly onto the surface — first, this avoids overspray on windows and displays, and second, you have better control over the dosage. A thin, even application is sufficient; thicker layers do not produce a better result but only dry slower.

Dilution with water up to 1:2 is a practical feature that many products do not offer. For the dashboard and center console, we recommend the diluted version — the result is a subtle, silky sheen that does not cause glare in sunlight. Especially in vehicles with large, light dashboards, too much shine can reflect on the windshield and impair visibility. For door panels and plastic parts in the trunk, it can be used undiluted, as the glare effect plays no role here, and a more intensive color refreshing effect is desired.

On the exterior, PlasticCare demonstrates its strength on unpainted plastic parts: Bumper strips, mirror caps, wheel arch trims, and decorative strips that have turned gray due to UV radiation regain their dark color. The effect is not permanent — it diminishes after a few weeks outdoors and several washes — but for detailing before a sale or as a regular maintenance measure, it is convincing. Those seeking more durable protection on exterior plastics can use PlasticCare as a pre-treatment and then apply SONAX PROFILINE CeramicCoating CC Plastic+Rubber as a long-term sealant.

Important during application: Do not work on hot surfaces. PlasticCare needs a moment to dry evenly — on heated plastic, the aqueous component evaporates too quickly, and uneven spots can occur. Ideally, work at room temperature or in the shade. The same applies to storage: Protect from frost, as the aqueous formula can be damaged at sub-zero temperatures. A frozen product can lose its uniform consistency and should no longer be used.

For a typical car interior, you will need about 20 to 30 milliliters of concentrate when diluted — meaning one liter of PlasticCare is sufficient for about thirty to forty complete interior treatments. For vehicles with particularly much plastic in the interior, such as SUVs or vans, expect double that amount. This efficiency is one of the reasons why PlasticCare is ultimately cheaper than cheap products despite the higher initial cost.

Engine Compartment Preservation — The Underestimated Area of Application

Engine compartment preservation is an area that many detailers neglect or cover with specialized products. PlasticCare offers a practical advantage here: It handles this task as well, without you needing an additional product. The optimal time is directly after engine washing — the engine compartment is clean, the surfaces are still slightly damp, and PlasticCare can be spread particularly evenly and quickly on the damp surfaces because the water acts as a lubricant.

The process: First, blow off excess water in recesses, at plug connections, and on the ignition system with compressed air. Then, spray PlasticCare undiluted with the Sprayboy evenly onto the plastic covers. The preservation protects against renewed soiling, prevents roughening and graying due to heat, oil vapors, and environmental influences, and gives the engine compartment a clean, consistently well-maintained appearance. During vehicle valuation — whether used car sales, lease returns, or vehicle inspections — a well-maintained engine compartment makes a measurable difference in the overall impression.

A practical note: PlasticCare is also excellent for camping vehicles and commercial vehicles, where the engine compartment is often exposed to more severe dirt than in cars. The solvent-free formula is harmless to rubber seals and cable insulation in the engine compartment — both materials that can be attacked by solvent-based preservatives. For electric and hybrid vehicles, the gentle formula is also a plus, as sensitive high-voltage cable sheaths and electronic connectors are not stressed by aggressive chemicals. A clean, preserved engine compartment signals during the main inspection and every workshop visit that the vehicle is carefully maintained — a detail that experienced inspectors and buyers immediately notice.

Plastic Care Comparison — PlasticCare vs. XTREME Plastic Sealant vs. Cockpit Spray

In addition to PROFILINE PlasticCare, the SONAX range also includes the XTREME Ceramic Plastic Sealant. The difference: The XTREME variant is positioned as a consumer product and offers a ceramic sealing component that primarily aims for protection. PROFILINE PlasticCare, on the other hand, is the choice for professional use because it can be diluted, is available in large containers (1 l, 5 l, 25 l), and covers engine compartment preservation in addition to care. For daily operational use with dozens of vehicles per week, PlasticCare is the more economical and versatile solution.

Classic cockpit sprays from hardware stores are no serious comparison. They are almost exclusively based on silicone oil, create an artificial high gloss that is undesirable in professional detailing, and offer no real care or regeneration. They do not belong on a vehicle in a detailing business — they leave residues that interfere with later ceramic sealing and must be laboriously removed. PlasticCare, on the other hand, is compatible with all common sealing systems and does not form problematic silicone layers. This is a crucial point for businesses that offer ceramic coatings in addition to detailing: With PlasticCare, you care for the plastic without creating problems for later coating work.

For detailers seeking a complete care system, the combination of PlasticCare for plastic, SONAX PROFILINE RubberCare for rubber and tires, and SONAX PROFILINE LeatherProtection for leather provides comprehensive coverage of all interior materials. Each product specializes in its material and delivers better results than a universal interior product that can do "a little bit" of everything. Those who shy away from building such a material-specific system can start with PlasticCare alone to achieve a significant quality leap compared to universal products — the other specialized products can then be added step by step as needed and as customers appreciate the difference.

Who Benefits from SONAX PROFILINE PlasticCare?

SONAX PROFILINE PlasticCare is aimed at detailing businesses, car dealerships, and workshops that care for vehicle interiors and engine compartments daily. The 5-liter container is the most economical option for businesses with high throughput — and the 25-liter canister is even cheaper for large businesses or detailing chains. The ability to dilute with water makes PlasticCare one of the most efficient plastic care products on the market: One liter yields three liters of ready-to-use solution when diluted 1:2.

For used car detailers, PlasticCare is particularly valuable because it quickly and visibly regenerates faded plastics — exactly what customers notice at first glance into the interior. A freshly treated dashboard with a natural shine conveys the impression of a well-maintained vehicle, and experience shows that this noticeably increases the achievable selling price. In combination with thorough interior cleaning — for example, with SONAX PROFILINE MultiStar as a pre-cleaner — PlasticCare provides the optical finish that makes the difference between "clean" and "detailed."

An honest note: PlasticCare is a care and preservation product, not a permanent sealant. On highly UV-exposed exterior plastics, the effect diminishes after a few weeks and must be renewed. Those looking for a long-term solution for exterior plastics should use PlasticCare as a care base and then apply a ceramic sealant over it. In the interior, where UV exposure is lower, the effect lasts significantly longer. For its intended use — professional plastic care in everyday detailing — SONAX PROFILINE PlasticCare is one of the most convincing solutions on the market: efficient, versatile, and with results that speak for themselves. Whether interior, engine compartment, or exterior plastics — PlasticCare is the product that should not be missing from any professional detailing equipment. Once you have used it in daily operations, you will quickly realize that cockpit sprays and cheap plastic care products are a thing of the past — not because it is more expensive, but because it simply works better and is even cheaper in the long run. The crucial difference is evident not only in the immediate result but above all in its durability and compatibility with subsequent care steps and sealants.